General Electric Microwave Guard, Shield, Barrier Parts

The Glass Light Lens is an OEM part for GE microwaves. It covers the light bulb inside the microwave, protecting it from food splatters and ensuring even illumination.The lenses measure approximately 7" x 3".

Causes of a bad glass light lens can include accidental impact, exposure to high heat, or general wear and tear.

Symptoms of a bad glass light lens include:

• Cracks or breaks in the glass
• Diminished visibility inside the microwave
• Light not being properly diffused
• Potential exposure of the light bulb to food splatters

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Stirrer Fan Cover is an OEM replacement part for GE Microwaves. It is responsible for shielding internal mechanisms during operation. 

Causes of a faulty cover include normal wear over time, cracking, or warping due to exposure to high heat. 

Symptoms of a problematic cover include:

• Excessive noise or vibration during use
• Reduced or uneven heating performance
• Gaps exposing vulnerable electrical components
• Loose pieces that could fall into the microwave cavity

This GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Canopy Mica is an OEM part for GE microwaves. This part covers the waveguide channel, preventing food particles and grease from entering the microwave's internal mechanisms.  

Causes of a bad canopy mica can include exposure to high levels of moisture or grease, physical damage such as cracks or burns, and general wear and tear over time.  

Symptoms of a bad canopy mica include:

• Sparks or arcing during microwave operation
• Burn marks or discoloration on the mica sheet
• Unusual noises while the microwave is running
• Uneven cooking or heating of food

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Oven Light Lens Cover is an OEM replacement part for GE microwaves. It serves as the protective glass shielding the internal light fixture. Reliable lens safety and clarity are pivotal to effortless visibility within microwave cavities.

Causes of a damaged light lens cover can include cracks or breaks from impact accidents during cleaning, warping from excessive heat exposure over time, or scratches obscuring transparency.

Symptoms of a compromised lens cover include:

• Cloudiness or opacity inhibiting light diffusion
• Exposure of live electrical wiring beneath broken glass
• Gaps permitting liquid/debris ingress into delicate internals
• Inability to accurately monitor microwaved items cooking

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the clear glass lens that covers the cooktop light on select GE over-the-range units. It shields the bulb from grease and splatters while allowing bright, even illumination of the cooking surface below.

• Protects the cooktop light bulb from grease, moisture, and debris
• Restores proper lighting if the original lens is missing, cracked, or stained
• Helps maintain safe, even illumination of the range area
• Common symptoms: broken or missing lens, dim or uneven light due to a damaged cover

• Disconnect power to the appliance before servicing
• Allow bulbs and surrounding area to cool completely
• Handle glass carefully to avoid chipping; wear cut-resistant gloves
• Ensure the lens seats fully and any retaining tabs/screws are secured per the product's service instructions

This molded resin cover is a protective plastic shield used inside the microwave. It helps protect internal components and ducting from splatter and debris and restores a secure, finished fit when the original cover is cracked or missing. What it does:

• Shields internal components from grease, steam, and food splatter inside the unit
• Helps maintain proper airflow paths and a snug, rattle-free fit
• Common replacement when the original cover is cracked, warped, loose, or missing
• Visual cue: exposed internal parts or a cover that won't stay secured

• One resin (plastic) cover

• Disconnect power (unplug or switch off the breaker) and allow the unit to cool
• Access the cover location; remove retaining screws/clips and keep hardware for reuse
• Align the new cover and secure it without overtightening
• Ensure the cover is fully seated and not contacting nearby moving parts before restoring power

This glass light cover shields and diffuses the cooktop light, protecting the bulb from heat, grease, and splatter while maintaining clear, even illumination over your cooking surface.

• Covers and protects the cooktop light bulb
• Diffuses light for more even illumination and reduced glare
• Helps keep grease and debris out of the light cavity
• Replace if cracked, missing, discolored, or not staying secured

• Disconnect power to the appliance before servicing and allow the area to cool
• Support the cover while removing any retaining screw(s) or release tabs
• Reuse original hardware/clips as applicable and seat the cover fully
• Restore power and test the light for proper operation

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

This resin canopy is the interior ceiling cover inside the microwave cavity. It shields the stirrer area from grease and splatter to help maintain even heating and protect internal components for safer, more reliable cooking. What it does:

• Covers and protects the stirrer/waveguide opening at the top of the cavity
• Helps promote even microwave energy distribution for consistent cooking
• Shields internal parts from grease, steam, and food debris
• Replace if warped, cracked, burned, discolored, loose, or if you notice arcing/sparking inside the cavity

• 1 resin canopy

• Disconnect power before servicing; microwave components can carry high voltage
• Remove the old canopy by releasing tabs or fasteners from inside the cavity
• Clean the cavity roof and seating surfaces before installation
• Ensure the canopy is fully seated and do not operate the microwave without it installed

This cover-damper is the replacement plastic cover that fits over the refrigerator air damper to help direct cold air between compartments for more consistent cooling. Replaces a cracked, broken or missing damper cover. What it does:

• Protects the damper assembly and helps channel airflow from the evaporator to the fresh-food and freezer compartments
• Restores proper air direction when a broken cover causes uneven temperatures or poor cooling
• Works with the damper to reduce drafts and improve compartment temperature balance
• Simple, passive part that mounts to the damper housing

• One cover-damper

• Disconnect power to the appliance before starting any repair
• Remove interior panels or shelves as needed to access the damper housing; handle plastic clips gently to avoid breakage
• Verify fit and orientation against the existing part before finalizing installation
• If the damper motor or actuator is damaged or the issue persists after installing this cover, inspect the full damper assembly

A replacement control panel cover that restores the appliance's front console appearance and protects the underlying control assembly from spills and debris. Fits the OEM panel opening for a clean, factory look. What it does:

• Covers and protects the control console assembly from moisture, grease and everyday wear
• Keeps buttons, switches and display areas free from debris that can interfere with operation
• Restores the appliance's exterior appearance after damage or wear to the original trim
• Helps maintain proper airflow and spacing around control components

• One control panel cover (trim piece) as shown

• Designed for a direct fit; install with basic hand tools — disconnect power before starting
• Handle gently to avoid scratching the finish; align mounting tabs before securing
• Replace missing or damaged screws or clips with OEM-specified fasteners

This microwave waveguide cover shields the waveguide opening from grease and moisture while allowing microwave energy to enter the cavity. Replace a burned, cracked, or missing cover to stop arcing and help protect internal components.

• Shields the waveguide port from food splatter, steam, and debris
• Helps prevent arcing/sparking when the original cover is scorched or contaminated
• Maintains a clear path for microwave energy to support proper cooking performance
• Common signs: visible burns or charring, crackling/sparking from the wall opening, staining or food behind the cover

• Disconnect power before servicing; microwaves can retain high voltage—do not open the cabinet
• From inside the oven cavity, remove the screw or release the tabs securing the old cover; clean the surrounding area
• Position the new cover flush over the opening and secure it using the existing fastener(s)
• Never operate the microwave without the waveguide cover installed

This Cover-Stirrer protects the microwave's stirrer assembly and helps direct microwave energy for more even cooking. It's a direct-replacement plastic cover that restores proper operation and prevents debris from reaching the stirrer. What it does:

• Shields the stirrer/fan area from food splatter and debris to prevent damage.
• Helps maintain proper microwave energy distribution so food heats more evenly.
• Prevents contact with moving stirrer components for safer operation.
• A cracked or missing cover can lead to uneven heating, noise, or arcing.

• One Cover-Stirrer

• Disconnect power to the appliance before servicing.
• Remove the microwave's inner components or cavity access panels to reach the stirrer area.
• Align and seat the cover securely over the stirrer assembly; do not force or overtighten.
• If the existing cover is damaged, replace it; inspect surrounding components for damage or wear.