General Electric Range Hood Switch

The GE light switch is an OEM replacement part responsible for controlling the operation of the lights within your range or range hood. This part is typically located in the control panel of the appliance, often integrated with other control switches and knobs. The primary function of the lamp switch is to enable users to turn the lights inside the range or range hood on and off as needed.

The switch can fail due to regular wear and tear, electrical issues, or physical damage. Over time, the internal contacts can wear out, or the switch mechanism can become stuck.

Symptoms of a bad light switch include:

• The oven light not turning on when the door is opened
• The light staying on continuously, even when the door is closed
• Flickering or intermittent operation of the oven light
• No response when pressing the light button

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Switch (Fan) is an OEM part for GE range hoods. It controls the operation of the fan, allowing you to adjust the ventilation speed and ensure proper airflow while cooking. This switch is essential for maintaining a comfortable and odor-free kitchen environment.

 Causes of a bad switch can include electrical failure, wear and tear from regular use, or physical damage due to impact. Ensuring the switch is functional is crucial for maintaining optimal ventilation performance.

Symptoms of a bad range hood switch include:

• The fan not turning on or off
• Difficulty in adjusting fan speeds
• The switch feeling loose or not engaging properly
• Inconsistent or intermittent fan operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Use part WB02X11325 for the nut - no longer included with the switch.

This motor/lamp switch is the user control for many GE range hoods. It turns the fan motor and hood light on and off, restoring reliable control when the original switch becomes worn, intermittent, or sticks.

• Provides on/off control for either the hood fan motor or the hood light, depending on model location
• Common symptoms: fan or light won't turn on, stays on, intermittent operation, or a loose/sticky rocker
• Restores reliable, positive switching of the selected circuit
• Direct-fit replacement designed for the original switch footprint

• Disconnect power at the breaker before servicing
• Remove filters and the control/trim panel to access the switch (procedure varies by model)
• Photograph or label wire positions; transfer one lead at a time to the new switch
• Seat the switch fully in its bracket, reassemble, restore power, and test operation

This fan control switch operates the fan motor to regulate blower speed and restore proper airflow in affected appliances. A direct-fit replacement designed to return fan control without reworking wiring or mounting. What it does:

• Selects and maintains fan speed for proper airflow and cooling
• Restores fan operation when the blower won't run or only runs at one speed
• Helps resolve noisy, intermittent, or non-responsive fan behavior
• Works as the user-facing control that communicates speed settings to the fan motor

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; avoid forcing connectors or terminals

Replacement fan switch that restores manual control of the appliance fan, allowing safe on/off operation and reliable ventilation or cooling. Use this switch to replace a worn or non-responsive fan control. What it does:

• Provides user control of the appliance fan (on/off function)
• Replaces a faulty switch that causes the fan to not start or not respond
• Helps restore proper ventilation/cooling when a bad switch prevents fan operation
• Fits as a direct replacement when the part number and terminals match

• Disconnect power to the appliance (unplug or shut off circuit breaker) before beginning work
• Access may require removing panels or the control console; keep fasteners and hardware for reassembly
• Match terminal positions and securely attach connector(s); do not force connectors or bend terminals

This blower switch is the replacement control switch that operates a dryer/vent blower assembly, restoring proper fan control for venting and airflow. It provides a direct, like-for-like switch to replace a worn or failed control. What it does

• Routes power to the blower motor when the appliance calls for ventilation or cooling
• Commonly replaces switches that cause no blower operation, intermittent fan run, or no airflow from the vent
• Fits into the blower control circuit to allow normal on/off or selector functions (depends on model)
• Restores reliable blower switching after original switch fails due to wear or electrical fault

• One blower switch

• Disconnect power to the appliance before starting any service to avoid shock or injury
• Verify symptom and switch location by visually inspecting wiring and testing continuity with a multimeter
• Match mounting and connector style to the original part; transfer any mounting hardware or brackets

This lamp switch controls power to the appliance's light circuit. It turns the light on and off via the door mechanism or controls, restoring visibility inside the cavity and fixing issues like a light that won't turn on or off. What it does

• Controls the on/off function of the lamp circuit
• Activates or deactivates the light with the door or control input (as designed for the model)
• Common fix for a light that won't turn on, stays on continuously, or works intermittently
• Replaces a switch with worn, stuck, or inconsistent contacts

• 1 lamp switch

• Disconnect power before servicing; if working on a microwave, be aware of high-voltage components
• Access is typically behind the control panel or latch area; remove mounting screws/panels as needed
• Note wire positions (COM/NO/NC) and transfer one at a time to the new switch
• Verify switch orientation, secure in bracket, and test light operation before reassembly

This lamp switch controls the oven interior light, letting you turn the light on or off from the range/oven control panel. Replaces a worn or non-working light switch to restore oven lighting control. What it does:

• Acts as the control for the oven interior lamp when you press the switch
• Commonly used when the light won't turn on, flickers, or the switch feels loose
• Provides a direct electrical connection between the oven lighting circuit and the lamp
• Matches OEM fit and function for compatible GE ranges and ovens

• 1 lamp switch

• Disconnect power to the appliance before servicing to avoid shock
• Basic wiring and panel access are required; keep track of mounting screws and wire locations
• Only install parts intended for your appliance model