General Electric Room Air Conditioner Filter

The Air Filter is an OEM replacement part for GE refrigerators. This component plays a crucial role in maintaining air quality and freshness within the refrigerator compartment by trapping odors, pollutants, and airborne particles. It measures about 14-1/2 inches wide by 10 inches high.

Symptoms that may indicate the need to replace the air filter include:

•  Persistent unpleasant odors within the refrigerator
• Reduced air circulation or airflow
• Visible discoloration or clogging of the filter material

Causes of a faulty air filter can include normal wear and tear over time, accumulation of excessive debris or contaminants, or exposure to high humidity or moisture levels.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Air Filter is an OEM part for GE air conditioning units. It plays a role in filtering out airborne particles, dust, and other contaminants, ensuring clean and healthy air circulation within your home or workspace. The filter measures approximately 18.5 inches x 10 inches.

Symptoms of a dirty or clogged air filter:

• Reduced airflow from the vents
• Increased energy consumption and higher utility bills
• Unpleasant odors from the air conditioning unit
• Visible dirt buildup on the filter surface

Causes of a bad air filter can include normal wear and tear over time, exposure to excessive dust or pollutants, or inadequate maintenance and replacement schedules.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore air conditioning models. 

Filter sub-assembly replaces the refrigerator's water-filter housing, holding the cartridge and directing water to the dispenser and ice maker. Restores secure cartridge seating and consistent water flow when the housing is damaged. What it does:

• Holds and seals the cartridge to help prevent leaks at the filter location.
• Directs filtered water to the dispenser and icemaker plumbing.
• Commonly replaced for leaks at the filter area, reduced water flow, or a loose/ill-fitting cartridge.
• Intended for cartridge-style refrigerator water-filter systems.

• Turn off the refrigerator water supply and relieve dispenser pressure before removing the old filter housing.
• Use basic hand tools; inspect and replace any worn O-rings or seals to ensure a proper seal.
• After installation, restore the water supply, check carefully for leaks, and run/flush water per refrigerator guidance.

This is the air filter assembly for select GE room air conditioners. It traps dust and lint before they reach the evaporator coil, helping maintain airflow and cooling performance.

• Captures airborne dust and lint to protect the coil and blower
• Helps maintain steady airflow and cooling efficiency
• Replace if cracked, warped, missing, or won't stay seated
• Common symptoms include reduced airflow and visible debris on the filter

• Unplug the unit before servicing
• Remove the front grille or filter access panel; slide the old filter out
• Install the new filter with airflow orientation matching the original
• Clean surrounding surfaces and reinstall grille before powering on

This air filter assembly traps dust and lint before they reach the evaporator coil, helping your room air conditioner maintain airflow and cooling performance. Replace clogged or damaged filters to protect components and keep cooling consistent. What it does:

• Screens intake air to help prevent debris from coating the evaporator coil and blower
• Helps sustain proper airflow and cooling performance
• A torn, missing, or heavily clogged filter can cause reduced air volume, longer run times, or uneven cooling
• Captures dust and lint that would otherwise accumulate inside the unit

• Includes: 1 air filter assembly

• Unplug the unit before servicing
• Open the front grille to access the filter; note the orientation of the old assembly
• Slide out the old filter and fully seat the new assembly in the same position
• Do not operate the unit without a filter installed

Keep your room air conditioner breathing easy with this replacement air filter. It captures dust and lint to help maintain airflow and cooling performance, while protecting the indoor coil from debris buildup.

• Screens return air to trap dust, lint, and debris before it reaches the evaporator coil
• Helps maintain proper airflow and consistent cooling
• Replace when torn, warped, missing, or heavily soiled
• Common symptoms of a bad/missing filter: weak airflow, poor cooling, longer run times, or frost on the coil

• Disconnect power before servicing
• Access the filter from the front grille or filter slot; slide out the old filter
• Clean the filter track/grille area; install the new filter fully seated and flat
• Operate the unit only with a filter installed to protect internal components

This air filter traps dust and lint before they reach the evaporator in your room air conditioner, helping maintain airflow and cooling performance. Replacing a damaged or missing filter protects the coil and keeps the unit running efficiently. What it does:

• Screens incoming air to help keep the evaporator coil clean
• Helps maintain proper airflow and cooling performance
• Replace if torn, warped, or excessively soiled
• Common symptoms: weak airflow, reduced cooling, or a filter that won't stay seated

• 1 air filter

• Disconnect power before opening the front panel
• Open the grille/access panel, remove the old filter, and note its orientation
• Slide the new filter fully into the track; ensure it sits flat and secure
• Do not operate the air conditioner without a filter; follow the owner's manual for care

This replacement air filter for room air conditioners traps dust and lint before they reach the coils and blower, helping maintain airflow and cooling performance when the original filter becomes clogged, damaged, or missing.

• Captures dust and lint from return air to protect internal components
• Helps maintain proper airflow for consistent cooling
• Reduces debris recirculation into the room
• Replace if torn, warped, or permanently clogged; symptoms can include weak airflow, longer run times, and poor cooling

• Disconnect power before servicing the unit
• Open or remove the front grille per your model's design
• Slide out the old filter; insert the new filter in the same orientation until fully seated
• Restore power and check airflow

This D filter is the dryer lint screen that traps lint and debris from the drying drum, helping maintain proper airflow and reduce lint build-up for more efficient drying. Fits dryers that use a D-shaped lint screen. What it does:

• Captures lint, fibers and small debris to prevent them from re-entering the drum or vent
• Helps maintain airflow to avoid longer dry times and poor drying performance
• Reduces lint buildup that can contribute to overheating or vent blockages
• Works as the removable screen you clean between cycles to keep the dryer running efficiently

• One D filter

• Disconnect power before inspecting or replacing the lint screen
• Remove the old screen by pulling it out of the housing, clean the housing, then insert the replacement until it seats fully
• Clean the screen after each load; replace if cracked, warped or damaged
• If dryer still shows poor airflow after replacement, inspect the venting system for blockages or damage