Parts for Oem-Attachments 19B70020OEM / 2014: General Assembly Parts

This is an upper chute assembly for a lawnmower.The grass clippings are forced up through the lower chute to the upper chute tube and pushed into the bagging system. The lower chute is a molded plastic part that may deteriorate over time due to exposure to the elements and having dirt and debris forced through it at high speed. If the trimmings are not making it to the bag, the upper chute should be inspected and replaced if necessary.The mower will work without the upper chute in place; however, the grass clippings and debris will not be bagged and will accumulate on the lawn. These piles of clippings can kill the grass underneath if not removed. If the upper chute breaks during use, replace it as soon as possible and run over the trimmed lawn a second time to pick up the clippings. This upper chute is a genuine OEM replacement part that is sourced from the manufacturer for use on lawnmowers and lawn tractors. This is a black molded plastic part that is sold individually. It is designed for use on lawn mowers and lawn tractors manufactured by Craftsman, MTD, and Troy-Bilt.

This replacement part is an upper chute. It is a genuine replacement part made by MTD. This part is used on the outside of many different lawn mowers and protects the parts inside of the machine. This part is made of durable plastic so that it lasts a long time. A new upper chute might be needed if the current one is damaged in any way including being dented, cracked, chipped, or snapped. If the previous part is damaged it is recommended that working gloves be used to prevent injury. This part should be fairly easy to replace and shouldn't require a lot of tools. Be sure the engine is powered down before replacing this part. This is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually and is only intended for use in lawn mowers.

This carriage bolt is a fastener with a flat tip and a round head with threading along the shank. Also known as coach bolts and plow bolts, the item can be used with many types of lawn and garden equipment. This is a 5/16 carriage bolt that resists turning after the bolt has been tightened. Wear and tear or impact can cause damage to a carriage bolt and lead to the need to replace them.Removing a carriage bolt requires twisting the nut loose from the end of the bolt and then hitting the nut with a hammer. This will begin to move the shoulder out of the lawn equipment. Continue the process until the bolt is loose enough to remove. Installing a new carriage bolt simply requires sliding the bolt into the hole, adding the nut, and tightening things up.This carriage bolt is designed for use with Craftsman, MasterCut, Toro, Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines lawn and garden equipment. It can be used with lawnmowers, chainsaws, snowblowers, edgers, and tillers. This is a genuine OEM product sourced directly from the manufacturer as an individual component.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This part is a replacement handle plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle plug in tillers.This handle plug ensures that the opening at the end of the handle is sealed properly. This part can easily become worn, detached, or lost and thus will require replacement with a genuine part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle plug, the appropriate owner's manual and equipment diagrams should be referred to. This handle plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a bagger mounting bracket. The brackets and screws fasten a bag to the deck of a lawn mower, allowing grass clippings to be caught in the bag. If the bagger is falling off of the lawn mower, it could be time for a new mounting bracket assembly. Over time the screws can strip, or the metal could rust, causing the brackets to break. A new mounting bracket assembly is much more efficient than using a self-made system or tying the bag onto the lawn mower deck. Before beginning any installation, ensure the lawn mower is off and the brake is set. Wear gloves whenever possible to protect the hands. The mounting brackets are installed beneath the bagging system to the rear of the lawn mower. Screwdrivers and socket wrenches will be needed for installation.This product is a genuine OEM part and is sourced directly from the manufacturer. This product is compatible with MTD and Cub Cadet machines.

This replacement part is a clevis pin intended for use in lawn equipment. This is a genuine replacement part made by MTD. Clevis pins are responsible for keeping different parts in place and secure so that the user is safe while using the appliance. Clevis pins are different from screws in that they attach using a fastening system as opposed to how a screw spins into place. A new clevis pin might be needed if the current one is damaged or broken in any way. It is also possible for the screws to become loose or stripped overtime and will need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.

This replacement part is a torsion spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A torsion spring is very common in many different types of machinery and appliances. These types of springs exert a rotary or torque force. This is one of the many parts that allow the engine to run properly and smoothly. A new torsion spring might be needed if the current one is damaged or missing. The most common reason for needing to replace this part is wear and tear. Because this part is very heavily relied on during use, it is common that it be replaced frequently. Be sure to wear work gloves while replacing this part as it could snap and cause injury. This torsion spring is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This replacement part is a cotter pin. This is a genuine replacement part made by MTD. This part is small but important to the overall workings of different equipment. Cotter pins are able to secure certain parts in place so that they are safe and effective during use. A new cotter pin might be needed if the current one has become logged in place or is missing altogether. If the pin has been bent, it is possible that it is no longer working effectively. It is also possible that the pin can become lodged into place over time due to normal wear and tear. Wear work gloves when working with small parts. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.

This flat washer is a genuine MTD replacement part for appliances that are operated by small engines, including lawn mowers, snowblowers, wood chippers, and leaf blowers. The purpose of a flat washer is to protect nuts, bolts, and other such fasteners from coming loose and separating the materials they hold together. One reason a flat washer might need to be replaced is from a loss or misplacement of the flat washer itself, as it is a small part that can slip itself off in some circumstances. Other reasons could include slow erosion, cracks, or flaws in the integrity of the material of the flat washer that can be attributed to general overuse or exposure to the elements. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flat washer part is compatible MTD brand equipment. This part sold individually.

This is Cub Cadet foam tape. Foam tape is a strong adhesive tape with a smooth, soft surface. This product is often used instead of clips and fasteners because of its ability to withstand vibrations and frequent movement. The adhesive side has powerful bonding properties and is reliable enough for use in outdoor situations. This product fixes a variety of different issues. When the hand-grip portion of the steering wheel wears off or cracks, this adhesive tape is an acceptable replacement. The foam material on the outside of the tape is gentle on the hands. This product can also be used as a weather guard or insulation material and can be used to secure the hood of a lawn mower and protect against rain in any openings or cracks. The tape is strong enough to secure lawn and leaf bags as well. Before applying the tape, make sure the surface is clean and dry. Make sure there is no debris or dirt on the surface where the tape is being applied. Use scissors to cut a strip of tape long enough to cover the surface of the application. Peel back the paper from the adhesive side of the tape and apply it to the desired surface. Press firmly on the tape for five to ten seconds, then smooth the tape out to remove any air bubbles. Allow the tape to sit for five minutes before working with the area where the tape was applied.The item listed is sold individually and is a genuine OEM product sourced directly from the manufacturer. This product is compatible with most brands of lawn mowers.

A wing knob is an essential but often overlooked piece of equipment used on many gasoline-powered lawn tools. On snowblowers, this versatile connector is used to adjust the exit chute. The knob handle is easily gripped and made of durable plastic, so when wearing mittens or thick gloves, one can still grasp and turn the wing knob. On many lawn mowers, the wing knob is used to secure and adjust the handle to the mower or, with mowers that have folding handles, to lower and store the handle for ease of transporting the mower. While it does not seem that one would ever need to replace a wing knob, these fasteners may be lost when mowers are moved from one lawn to another or when the mowers are being stored until the next growing season. On rare occasions, the threads in a wing knob can be stripped if they are not turned tightly enough when first fastened after unbending mower handles. These devices are inexpensive and virtually universal, so it is wise to keep an extra wing knob on hand in case one becomes lost. The wing knobs fit Yard-Man, Troy-Bilt, Craftsman, Bolens, and Yard Machine mowers and snowblowers. Made of durable plastic, these OEM knobs are genuine manufactured replacement parts that perfectly match the originals.

This bagger weight attachment is a genuine MTD part, sold individually. This bagger weight attachment can be used as a replacement part in a lawn mower. The purpose of the bagger weight attachment in a lawn mower is to weigh down the other side of the lawn mower so that when the bagger is attached to the lawn mower, the lawn mower does not tilt down in the direction of the heavier side.The bagger weight attachment might have to be replaced if the component is damaged to the point that it cannot serve as an effective counterweight in a lawn mower with the bagger attached. If the bagger weight attachment suffers damage that reduces or increases the weight of the component or if, somehow, the bagger weight attachment is damaged in a way that prevents it from attaching at all, the bagger weight attachment should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bagger weight attachment is compatible with the following outdoor appliance brands: MTD and Yard Man.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This part is a hex cap screw that is used on a variety of outdoor power equipment. A hex cap screw is used to fasten components together securely. The head of the screw is shaped like a hexagon, hence the name "hex cap screw."A new hex cap screw may be needed if the current one is stripped, broken, or missing. Since screws are such a small component, it is important to place them in a safe place so that they are not lost. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This hex cap screw is a genuine Husqvarna part. It is sold individually. This particular hex cap screw is compatible with chippers, shredders, lawnmowers, lawn tractors, snowblowers, and vacuums that are manufactured by the following brands: Husqvarna, Craftsman, Bolens, Husky, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This replacement part is a lower chute. It is a genuine replacement part made by MTD. This part is used on the outside of many different types of lawn mowers and protects the parts inside of the machine. This part is made of durable plastic so that it lasts a long time even when exposed to rough terrain. A new lower chute might be needed if the current one is damaged in any way including being cracked, dented, snapped, or chipped. If the previous part is damaged it is recommended that working gloves be used to prevent injury during the repair. This part should be fairly easy to replace and shouldn't require any major tools. Be sure the engine is powered down before replacing this part. This is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.