Gibson Dryer Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 131719100
This dryer timer is the cycle control that advances your dryer through Timed and Auto Dry settings. Replacing a failed timer restores proper cycle progression, start/stop, and end-of-cycle shutoff.
- Advances the cam and internal contacts to move the dryer through heat, motor, and cool-down steps
- Governs run time on Timed Dry and Auto Dry cycles
- Routes power to the correct circuits in sequence; a failed timer may not advance or may stop early
- Common symptoms include timer knob not moving, dryer running indefinitely, or not starting on certain settings
What's included: 1 dryer timer assembly Install notes:
- Disconnect power; for gas models, also shut off gas
- Remove knob/dial, open the console, and unmount the timer
- Label or photograph wiring; transfer wires one at a time to the new timer
- Reassemble and test both a Timed Dry and an Auto Dry cycle
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$180.52
- Compare At:
-
$216.62
- You Save:
-
$36.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303297177
This dryer timer controls and advances the cycle you select, routing power to the correct components and shutting the dryer off at the proper time. Replacing a worn timer restores consistent cycle timing and end-of-cycle shutoff.
- Controls cycle selection and duration
- Advances the dial through the program and turns the dryer off at the end
- Routes power to dryer components at the correct times during the cycle
- Signs of a failing timer may include: cycle not advancing, running indefinitely, stopping early, or erratic timing
What's included: 1 dryer timer Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Remove the control knob and access the console to unmount the old timer
- Label or photograph wiring; move terminals to the new timer one at a time to avoid miswiring
- Align the timer shaft with the dial, secure the timer, and test operation before reassembly
Do-It-Yourself Stories from Customers like You
Turned out to be a thermostat wouldn't heat up and the timer would not advance John M. • Lewiston , UT • December 21, 2024
Changed the thermostat
Read more
More
$172.55
- Compare At:
-
$203.61
- You Save:
-
$31.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 131062300
The Dryer Timer is an OEM part for Frigidaire dryers. It is responsible for controlling the drying cycles by regulating the amount of time the dryer runs. The timer ensures that clothes are dried according to the selected settings, contributing to efficient and effective drying performance.
Causes of a bad timer can include electrical issues such as a short circuit, worn-out internal components due to frequent use, or exposure to moisture that can damage the timer mechanism.
Symptoms of a bad Dryer Timer include:
- The dryer not advancing through cycles
- The dryer running continuously without shutting off
- Inconsistent drying times
- The timer knob not turning or feeling loose
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The timer had stopped advancing William S. • Arlington , TX • April 03, 2017
With a Phillips screw driver, on the back of the control panel there was about 6 or 7 screws to undo, to take the cover off and 2 screws holding the timer in place. Just undone those, took out old timer, made sure I took wires from old timer one at a time, and, put on new timer. Put everything back, although I had to find a couple of very small washers to make the timer fit tight, in the 2 holes it came out of. Luckily I had those or would of been a very loose timer. Very easy to do.
Read more
More
$182.95
- Compare At:
-
$215.88
- You Save:
-
$32.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 131583801
$244.62
- Compare At:
-
$291.10
- You Save:
-
$46.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 131062400
Gibson dryer control board replacement parts are essential to keeping your dryer running smoothly. Think of this as the brain of your appliance, coordinating various functions to ensure your clothes come out dry and fresh. Without a properly functioning control board, your dryer might be more ornamental than operational.
These control boards are the heart of your drying technology, managing everything from heat levels to cycle timing. Whether you have a basic model or something more advanced, Gibson dryer parts, especially the OEM ones, are designed to fit perfectly and work seamlessly with your machine. OEM parts ensure you're getting the highest quality and compatibility, which means fewer headaches down the line.
Having these parts readily available is a real game-changer, allowing you to tackle any hiccups with confidence. So, the next time you need a replacement, remember that reliable parts are at your fingertips to keep your dryer in top shape.
More