Gibson Dryer Gasket & Seal
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937183
The Lower Felt Seal is an OEM part for Frigidaire dryers. This part creates a tight seal between the drum and the front panel, preventing air leakage and reducing energy consumption.
Symptoms of a failing Lower Felt Seal include:
- Clothes getting snagged or caught during the drying cycle
- Increased drying times due to heat escaping from the drum
- Excessive noise or squeaking as the drum rotates
- Visible wear, tears, or gaps in the felt seal
Causes of a bad lower felt seal can include regular wear and tear from the constant rotation of the drum, physical damage from overloading the dryer, or deterioration due to exposure to heat and humidity over time.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 137513300
The Drum Glide is an OEM part for Frigidaire dryers. It is designed to support the front of the dryer drum as it rotates, allowing the drum to turn smoothly with minimal friction and noise. This is a single glide. Your dryer uses two so it is recommended to replace both at the same time.
Causes of a bad drum glide can include wear and tear from regular use, excessive loads that put undue strain on the drum and its components, or accumulation of lint and debris that can interfere with the glide's movement.
Symptoms of a bad Drum Glide can include:
- Unusual noises, such as screeching or squealing, during operation
- Increased difficulty in turning the drum, leading to longer drying times or incomplete cycles
- Visible wear or damage to the glide itself, indicating it is time for a replacement
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937182
The Upper Felt Seal is an OEM part for Frigidaire dryers. It provides a seal between the dryer drum and the front panel, helping to retain heat and ensure efficient drying performance. This felt seal also minimizes friction between the drum and the front panel, reducing wear on the drum and the appliance itself. The seal measures approximately 16.5" long x 1" wide. The adhesive is included as well.
Causes of a bad upper felt seal can include wear and tear over time, exposure to high heat, or damage from foreign objects caught in the drum. A compromised felt seal can lead to inefficient drying and increased energy consumption.
Symptoms of a bad upper felt seal include:
- Clothes taking longer to dry
- Excessive lint accumulation inside the dryer
- Unusual noises during the drying cycle
- Visible damage or gaps in the felt seal
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Also available in maintenance kit: Part Number 5304457724.
Do-It-Yourself Stories from Customers like You
Dryer makes thumping noise when rotating and catching buttons zippers and snaps and ripping them off Rodney H. • Pike Road , AL • September 23, 2014
Replaced the upper and lower felt strips and drum glides. Dryer running much quieter and not tearing clothes.
Read more
More
$28.95
- Compare At:
-
$34.74
- You Save:
-
$5.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 134417000
The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.
Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.
Symptoms of a bad seal include:
- Increased drying time as heat escapes
- Excess lint and moisture accumulation inside dryer components
- Visibly worn or cracked seal edges
- Cool air leakage noticed around the door when the dryer is running
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014
Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will...
Read more
More
$15.95
- Compare At:
-
$39.50
- You Save:
-
$23.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937139
The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer.
Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.
Symptoms of a bad Front Felt Glide Assembly include:
- Unusual noises during operation, such as squeaking or grinding
- The dryer drum may catch or hesitate during rotation
- Increased wear and tear on clothing due to the drum's rough movement
- The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
Gibson dryer gasket or seal replacement parts are essential for maintaining the performance of your appliance. These components create a tight seal that prevents heat and moisture from escaping, ensuring your dryer operates efficiently. Over time, gaskets or seals can wear out, affecting the dryer's effectiveness.
Your Gibson dryer relies on these parts to keep everything running smoothly. A high-quality Gibson dryer gasket or seal fits perfectly, leaving no gaps for air to leak through. OEM replacement parts are ideal as they guarantee compatibility and durability, maintaining your dryer's reliability.
With the right Gibson dryer parts on hand, your appliance can be up and running quickly. You can trust that these replacement parts are readily available and designed to meet your needs. So next time you notice a bit of wear and tear, remember that the perfect Gibson dryer gasket or seal is just around the corner.
More
Related Parts
Gibson Dryer Accessories Parts
Gibson Dryer Adhesive Parts
Gibson Dryer Axle, Roller, Pulley
Gibson Dryer Baffle
Gibson Dryer Bearing
Gibson Dryer Belt
Gibson Dryer Blower Wheel Or Fan Blade
Gibson Dryer Bracket & Flange Parts
Gibson Dryer Bumper, Bushing, Grommet Parts
Gibson Dryer Burner & Related
Gibson Dryer Cap Or Cover Parts
Gibson Dryer Clip Or Clamp
Gibson Dryer Control Board
Gibson Dryer Door, Door Glass & Parts Parts
Gibson Dryer Drum, Bulkhead, Front Parts
Gibson Dryer Duct Parts
Gibson Dryer Endcap Parts
Gibson Dryer Filter
Gibson Dryer Fuse Or Sensor
Gibson Dryer Gas Conv Kit Parts
Gibson Dryer Handle
Gibson Dryer Heating Element
Gibson Dryer Hinge Parts
Gibson Dryer Housing Or Cover Parts
Gibson Dryer Igniter
Gibson Dryer Insulation, Sound Dampening Parts
Gibson Dryer Knob, Dial & Button
Gibson Dryer Latch, Catch, Lock
Gibson Dryer Leg Or Foot
Gibson Dryer Light, Bulb, Lamp Parts
Gibson Dryer Lubricant Parts
Gibson Dryer Manual, Care Guide Parts
Gibson Dryer Motor
Gibson Dryer Paint Parts
Gibson Dryer Panel Parts
Gibson Dryer Plug Or Insert Parts
Gibson Dryer Screws, Nuts, Washers
Gibson Dryer Shaft Or Pin Parts
Gibson Dryer Spring Parts
Gibson Dryer Support Parts
Gibson Dryer Switch
Gibson Dryer Terminal Block, Receptacle Parts
Gibson Dryer Touch Pad Parts
Gibson Dryer Wire, Harness, Power Cord Parts