Gibson Refrigerator Parts

The Ice Door Seal is an OEM part for Frigidaire refrigerators. This seal is designed to create an airtight barrier around the ice dispenser door, preventing warm air from entering the freezer and maintaining optimal temperature inside the ice compartment. Please note, this listing is for the seal only, other components are sold separately.

Over time, the ice door seal can become worn out or damaged due to frequent use, exposure to varying temperatures, and regular opening and closing. Causes of a bad ice door seal include cracking, tearing, or loss of elasticity, which can lead to air leaks.

Symptoms of a bad ice door seal include:

• Frost or ice buildup around the ice dispenser
• Warm air entering the freezer compartment
• Increased energy consumption
• Water or condensation around the ice dispenser area
• The ice door not closing properly or sealing tightly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Door Gasket is an OEM part for Frigidaire freezers. It is designed to create a secure seal around the perimeter of the freezer door, preventing cold air from escaping and warm air from entering. This seal is crucial for maintaining the freezer's efficiency and effectiveness in preserving food at optimal temperatures. It measures approximately 17-1/4 inches in height and 26-1/2 inches in width.

Symptoms of a bad Freezer Door Gasket include:

• Visible gaps or tears in the gasket,
• Condensation or ice buildup around the door area,
• The freezer struggling to maintain the set temperature,
• Increased energy consumption as the freezer works harder to compensate for air leaks.

Causes of gasket failure typically include normal wear and tear, exposure to extreme temperatures that can cause the material to harden and lose elasticity, or accidental damage from cleaning or use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes.

Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections.

Symptoms of a bad light/switch include:

• The interior light fails to turn on when the door is opened
• The light stays on when the door is closed, leading to potential overheating
• An impact on the refrigerator’s temperature regulation due to the switch not signaling the door's closure

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Door Rack Support is an OEM replacement part for Frigidaire refrigerators. It serves as the mounting bracket or structure that holds and secures the door racks or bins in place on the inside of the refrigerator door.

Symptoms of a need to replace the door rack support:

• Loose or wobbly door racks or bins
• Racks or bins falling off the door when opened
• Visible cracks, breaks, or damage to the support structure

Causes of a faulty door rack support can include general wear and tear over time, physical impact or mishandling, or manufacturing defects in the material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. It serves as a critical component in the refrigerator's door, providing support for the shelves that hold various items like bottles, jars, and other containers. This support measures approximately 2 1/2" tall x 1 1/2" deep. 

Causes of a bad door shelf support can include cracking due to overloading, material fatigue from regular use, or accidental damage. When the supports weaken or break, it affects the structural integrity of the door storage, leading to potential spills or damaged goods.

Symptoms of a bad Door Shelf Support include:

• Shelves leaning or sagging noticeably
• Difficulty in fitting the shelf into the door
• Cracks visible in the support
• Shelves falling off or failing to hold items securely

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Bar is an OEM part for Frigidaire refrigerators. It is designed to secure items on the refrigerator door, providing additional storage space and helping to keep items organized and easily accessible. The sturdy construction ensures that it can hold bottles, jars, and other items securely. It measures approximately 31 inches in length. 

You should replace the door shelf bar if it becomes damaged or worn out. Common causes include regular use, accidental impacts, or the weight of heavy items over time, which can cause the bar to crack or break.

Symptoms of a bad door shelf bar include:

• Items falling from the door shelf
• Visible cracks or breaks in the bar
• Difficulty keeping items securely in place
• The bar not fitting properly or staying attached

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Meat Pan Hanger is an OEM part for Frigidaire refrigerators. It provides support and organization for the meat pan or deli drawer in your refrigerator. The meat pan hanger is built to securely hold the meat pan in place, preventing it from sliding or falling out. It ensures that your meat or deli items are properly stored and easily accessible.

A bad meat pan hanger can occur due to wear and tear over time or accidental damage. If the hanger becomes loose, cracked, or broken, it can compromise the stability of the meat pan, making it difficult to use and potentially causing damage to the drawer or its contents.

Symptoms of a bad meat pan hanger include:

• Loose or wobbly meat pan/deli drawer.
• Difficulty in opening or closing the drawer.
• Noticeable damage or deterioration of the hanger.
• Inability to securely attach the meat pan to the hanger.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This is a left hand track only. Screws not included. For the mounting screws order 215005101.

The Lower Crisper Pan is an OEM part for Frigidaire refrigerators. It is designed to store fruits and vegetables at an optimal humidity level, keeping them fresh for a longer period. This pan fits into the lower section of the refrigerator and provides a dedicated space for produce, helping to organize and maximize the storage capacity of your fridge. The pan measures approximately 16.5" x 16.2" x 8". 

You should replace the lower crisper pan if it becomes cracked, broken, or warped. Causes of a bad crisper pan can include regular wear and tear from frequent use, overloading with heavy items, or accidental damage from dropping or mishandling the pan.

Symptoms of a bad lower crisper pan include:

• Cracks or visible damage to the pan
• Difficulty sliding the pan in and out of its compartment
• Reduced ability to maintain proper humidity levels, leading to faster spoilage of produce

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Bin is an OEM part for Frigidaire refrigerators. It is a storage compartment located on the inside of the refrigerator door, providing a convenient space to store items such as condiments, beverages, and jars. This bin measures about 10 inches wide by 4 inches high by 6 inches deep.

A bad door bin can occur due to accidental damage, wear and tear over time, or improper handling. If the bin cracks, breaks, or becomes warped, it can compromise its function and affect the storage capacity of your refrigerator.

Symptoms of a bad door bin include:

• Cracked or broken bin.
• Difficulty in keeping items in place.
• Limited storage capacity.
• Inability to attach the bin to the door.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Crisper Pan is an OEM part for Frigidaire refrigerators. It provides enclosed storage for fruits and vegetables, helping maintain freshness.

Over time, the crisper pan can crack or warp due to exposure to cold, moisture, and repeated opening/closing. Damage from improper handling when loading produce can also cause failure.

Symptoms of a failing crisper pan include:

• Poor humidity regulation/airflow
• Condensation buildup inside the pan
• Visible cracks or splits in the plastic
• Difficulty sliding the crisper in and out
• Produce spoiling more quickly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Note: Due to a factory revision, the new crisper pan may not have the graphics across the front but is a genuine factory replacement part.  

The Gallon Door Bin is an OEM replacement part for Frigidaire refrigerators. It is a spacious storage compartment designed to be mounted on the refrigerator door, providing convenient access to frequently used items. This bin measures approximately 13" wide and 7-1/4" deep.

Causes of a faulty gallon door bin can include physical damage, such as cracks or breaks, or issues with the mounting mechanism that secures it to the door.

Symptoms of a need to replace the gallon door bin:

• Cracks, chips, or other visible damage to the bin
• Difficulty in opening or closing the refrigerator door due to the bin's positioning
• Loose or unstable mounting, causing the bin to detach or fall off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Door Hinge Bearing is an OEM part for Frigidaire refrigerators. It supports the refrigerator door, allowing it to open and close smoothly. This bearing ensures that the door remains properly aligned and operates without excessive friction, contributing to the overall longevity and functionality of the refrigerator.

Over time, door hinge bearings can wear out due to regular use, exposure to weight stress, or lack of lubrication. When the hinge bearing becomes faulty, the refrigerator door may become misaligned, difficult to open or close, or cause unusual noises.

Symptoms of a bad door hinge bearing include:

• The door sagging or becoming misaligned
• Difficulty opening or closing the door
• Unusual squeaking or grinding noises when the door moves
• The door not sealing properly, leading to temperature fluctuations inside the refrigerator

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators, designed to hold and support the shelves on the inside of the refrigerator door. This part ensures that door shelves are securely mounted, providing stable storage for bottles, condiments, and other items.  

Symptoms of a failing Door Shelf Support include:

• Shelves becoming loose or sagging
• Difficulty in keeping items securely on the door shelves
• Cracks or breaks in the support

Causes of a bad Door Shelf Support can range from normal wear and tear, to accidental damage, such as overloading the door shelves with too much weight or impact from moving items in and out. Over time, the stress of weight and use can lead to the supports becoming damaged. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Replacement Icemaker is an OEM part for Frigidaire side-by-side refrigerators. It serves the critical function of automatically producing batches of ice cubes on demand. Note: The Icemaker Kit comes with an adaptor harness that may be needed for some applications. The harness converts a 4 pin connector to a 3 pin connector.

Causes of a malfunctioning icemaker can vary. They may stem from failed control sensors affecting conductivity and freeze times, scaled or corroded water lines, or an ice basket mold with broken fins and louvers.
Symptoms of a bad icemaker include:

• Reduced or inconsistent ice production
• Ice cubes getting jammed or fused together
• Water leaks or spray inside the freezer
• Strange sounds or mechanisms not working

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Closer Plate is an OEM part for Frigidaire refrigerators. It helps ensure that the refrigerator door closes smoothly and securely, preventing air leaks that can compromise the appliance's efficiency and cooling performance.

The door closer plate may need to be replaced if it becomes worn out or damaged. Causes of a bad door closer plate can include frequent use, misalignment, or physical damage from accidental impacts.

Symptoms of a bad door closer plate include:

• The refrigerator door not closing properly or staying ajar
• Increased energy consumption due to air leaks
• Unusual noises when opening or closing the door
• The door feeling loose or misaligned

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.