Huskee / Husky Tractor

Shoulder screw for lawn mowers and tractors. Secures parts in place during operation. Replace if sheared off, stripped, or missing for safe use.

If your lawn tractor steering is popping or feels loose, the steering shaft may be worn or stripped. Connects steering wheel to steering mechanism.

Spacer for lawn tractors and riding mowers. Installs between components to maintain proper clearance. Replace if worn, damaged, or missing during repair.

Fix loose or vibrating parts with this jam nut. Used as a locknut to secure standard nuts in place on mowers and tractors. Easy 5-minute installation.

If your lawn tractor won't stop properly or brakes feel weak, this brake puck creates pressure on the brake disk when you push the pedal. Essential safety part.

A 12-volt bulb that provides forward lighting for the lawn tractor, mounted in the headlight housing. Replace when the light dims, flickers, or burns out completely.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

Shoulder bolt for riding mowers and lawn tractors. Used as an axle for wheels and deck components. Replace if bent, worn, or stripped from regular use.

14.88" mulching blade for lawn mowers and tractors. 3-in-1 design mulches, bags, or side discharges clippings. Replace when dull or damaged. Verify fit.

21.23-inch mulching blade for 42-inch deck lawn tractors. Replace when blade edge is worn, bent, or cracked. Features 6-point star center hole.

This is a V-groove drive pulley with an integrated hub designed for the transmission system of a lawn tractor. It transfers rotational power from the engine via the drive belt to the transmission. Replace this pulley if it is wobbling, cracked, or worn, which can cause belt slipping, loss of drive power, or unusual noises during operation.

The exhaust systems on lawn and garden equipment are just as important as those on a vehicle. They need a good seal to prevent a leak between the carburetor and the exhaust tube, which would allow air leakage that could cause performance issues and loud noise. Over time all exhaust gaskets deteriorate and require a full replacement. It is relatively easy to replace an exhaust gasket and requires only the use of screw drivers, a socket set or a wrench set depending on the device being service. Replacement components such as sockets or screws may also be required during this repair. The gasket surfaces should be cleaned and fully dried before being installed between the carburetor and the exhaust tube. This exhaust gasket works with Toro, Simplicity, Murray and Briggs & Stratton lawnmowers, generators, snowblowers, wood chippers, and lawn tractors. It also works with equipment made by Craftsman, Husqvarna, Cub Cadet, Poulan, Wheel Horse, MTD, Ariens, and more.

Replace your cracked or broken lawn tractor discharge chute assembly. Mounts to the mower deck to direct grass clippings away from the cutting area.

This is a self-tapping screw. It attaches to various lawn machines' engines. The exact location depends on the make and model of the device. With age or misuse of the lawn equipment, the self-tapping screw may become damaged or break. One sign that the screw is gone or broken is a loose connection between the engine and the foundation that it sets on. Excessive vibration is another indicator that the self-tapping screw is missing or damaged. If it does wear out and get lost or damaged, the part must be replaced.It is easy to replace a self-tapping screw. First, make sure that the device is cooled. Wear gloves for protection. It requires a wrench to install. If the self-tapping screw breaks, other tools such as pliers may be needed to get the screw out.The self-tapping screw is a genuine OEM part supplied by the manufacturer. It is made of durable metal. The self-tapping screw is sold individually. It is compatible with machines produced by Troy-Bilt, Bolens, Yard-Man, Yard Machines, Cub Cadet, and Husky. It is used in a variety of lawn tractors, lawnmowers, and other lawn equipment engines.