Husqvarna Chainsaw Parts

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This is a replacement chainsaw bar adjustment pin that is a part of the clutch cover assembly. The pin connects to the adjustment screw and will fit into the hole on the bar. By turning the screw, it will turn the adjustment pin, which will loosen or tighten the chain on the bar. The bar adjustment pin is hearty, but it can become damaged through corrosion, wear and tear, and more. In addition, it could also be lost. Because the pin is essential, it is important to replace the pain when it shows signs of distress or when it is lost. When using the adjustment pin or adding a replacement, the owner mustn't overtighten the pin. This can cause damage to the pin, which would necessitate another replacement. This is a genuine OEM replacement pin that is sold individually for use on chainsaws. The pin is compatible with several brands including Craftsman, Husqvarna, Poulan, and Poulan Pro.

This is a genuine air filter replacement designed for use in select lawn and garden equipment engines. The air filter is responsible for catching debris and dirt that may be in the air as it comes into the engine. This prevents the engine from being damaged by debris or buildup. Over time, the air filter will become clogged and should be replaced as a part of routine maintenance. It is helpful to keep an extra air filter on hand in case of an emergency replacement need. This genuine OEM air filter is manufactured by Husqvarna and meets exact standards for compatible models. It can be used in select models of chainsaws from the brand, as well as some from Jonsered. This air filter is sold as an individual unit and does not include any additional parts or accessories. A screwdriver will be required for replacement. To replace the filter, allow the engine to cool. Then, remove the screws from the cover of the filter and take out the old filter. Put the new filter in place and replace the cover. Then, reattach the screws and the job is done. Be sure to wear gloves when performing engine repairs.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This part is an ignition module that is used on chainsaws. An ignition module is a component of the engine ignition system. This part connects the spark plug to the engine and supplies power that helps create the spark which starts the engine.A new ignition module may be needed if the original is cracked, broken, or damaged in any way. The ignition module may become damaged or worn after normal use over a period of time. If this is the case, the ignition module will need to be replaced for the chainsaw to turn on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This ignition module is a genuine Husqvarna part. It is sold individually. This specific ignition module is compatible with chainsaws that are manufactured by Husqvarna, Poulan, and Jonsered.

The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.

This flange nut is a genuine Husqvarna part, sold individually. This flange nut can be used as a replacement part for a chainsaw, an edger, a concrete saw, or a string trimmer. The function of the flange nut is to fasten components to one another in conjunction with a bolt.A flange nut might have to be replaced in the event that it is lost, misplaced, or damaged. Flange nuts are small components that can loosen and go missing within the standard lifespan of an outdoor appliance. Additionally, flange nuts can suffer punctures or erosion that can warp the part beyond functionality. If this happens, the flange nut should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This flange nut is compatible with the following brands: Husqvarna, Jonsered, and Poulan.

This chain catcher is a genuine Husqvarna part, sold individually. This chain catcher can be used as a replacement part in a chainsaw. The purpose of the chain catcher, also known as a chain tensioner, in a chainsaw is to protect the chain of the chainsaw from falling off and flinging away from the appliance while in operation if the chain comes loose.The chain catcher in a chainsaw might have to be replaced if it suffers sufficient damage to reduce or negate its functionality. If the chain falls off of the chainsaw and is not kept in place by the chain catcher or if the chain catcher seems visually damaged upon an inspection, it should be removed and replaced by this genuine OEM replacement part in accordance with the relevant instructions from an appliance manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This chain catcher is compatible with the following outdoor appliance brands: Husqvarna and Jonsered.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are an important part of many types of machinery and ensure that torque and other forces allow for the engine to run properly and smoothly. A new spring might be needed if the current one is missing or damaged in any way. Springs can become brittle under pressure and snap after years of use. Be sure to replace this spring as soon as possible if this is the case. Refer to the proper user manual for more details on how to replace this specific part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a clutch drum assembly. It is a genuine replacement part made by Husqvarna. This particular clutch drum is usually found in chainsaws. The clutch drum's main responsibility is transmitting the spinning motion to the chain so that the user is able to cut things using the appliance. A new clutch drum assembly might be needed if the turning motion of the chainsaw is no longer working. This can be due to a damaged or malfunctioning clutch drum and it is recommended that it be replaced as soon as possible. Be sure to wear working gloves to a previous injury from the chain of the chainsaw. This part is sold as a single piece. This is also a genuine OEM replacement part and is sourced directly from the manufacturer.

Here is an authentic clutch friction washer that is sourced from the manufacturer. It is for use with several types of handheld outdoor power equipment. Other names for the part include clutch friction disk and clutch washer. The washer works as a friction disk that will help create the proper fit between components in the machine, which helps to engage the clutch. It is made from durable metal. The clutch friction washer that comes with the machine tends to be durable, but it may still need to be replaced at some point. The washer could become corroded, or it could break. It could also become lost when the owner is performing other maintenance on the machine. A wrench and screwdriver will typically be needed to conduct the replacement. Owners should check their manuals to ensure the correct location for installing the washer. The genuine OEM clutch friction washer is sold individually. It can work with more than 150 models of chainsaws, hedge trimmers, and string trimmers. Brands that have models compatible with the part include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

This is a replacement screw that is sourced from the manufacturer. The screw can be used for a range of applications on many types of lawn and garden equipment. One of the most common uses of this type of screw is to affix the housings, such as the starter cover, to the machine. Owners should refer to their equipment diagrams to ensure they are using the screws in the proper locations on their equipment. The screws could need to be replaced for any number of reasons. In some cases, they might become damaged or corroded and will need to have a replacement. Other times, the screws could become lost. When removing the housing from the equipment, the owner might misplace some of the screws and they will need to be replaced. Replacing the screws is simple and will only require a screwdriver. This is a genuine OEM screw that is sold individually. The screws can be used with more than 150 various models of chainsaws, string trimmers, and leaf blowers. Compatible brands include Poulan Weed Eater, Husqvarna, Jonsered, Poulan, and Poulan Pro.