Husqvarna Chainsaw Parts

This carburetor repair kit is made for use in chainsaws by several manufacturers. It has each of the needed components to get a chainsaw back into working order if the carburetor is damaged or no longer working. The carburetor is the component in a chainsaw that controls how fuel and air mix together before being ignited in the cylinder to keep the engine running. One of the signs that the carburetor may be having problems is if the chainsaw doesn't want to start its engine even if the fuel tank is completely full. Testing the carburetor can be done by taking out the air filter and adding a small amount of fuel to the carburetor. Pull the starter rope and watch to see if the engine turns on for a few seconds before stopping. If this is the case, the carburetor will need to be cleaned, rebuilt, or replaced. This individual carburetor repair kit is designed to work with chainsaws by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is a genuine OEM product that is provided directly by the manufacturer. A few basic tools and work gloves may be needed to use the repair kit.

This carburetor is designed to mix gas and oil together before moving the mixture into a chainsaw's engine. It is a single-cylinder model with an auto-choke system and requires regular maintenance to stay in good shape. Changing the oil, replacing the air filter, and adding a fuel stabilizer will help keep the engine performing at its best. If the carburetor isn't working properly, this may be due to blockages of debris, dirt, and fuel. If the fuel tank is full but the engine refuses to start, it's a good idea to test the carburetor for problems. Take out the air filter and then pour a small amount of fuel into the carburetor itself. Yank on the starter rope and see if the motor starts. It should die shortly after. If this occurs, the carburetor may have a problem and require replacement. This is an individual part that is compatible with Poulan, Craftsman, and Husqvarna chainsaws. The carburetor is a genuine OEM product that is provided directly from the manufacturer. It comes with a rubber O-ring and a gasket. A screwdriver will also be required to make a replacement.

This replacement part is a starter handle and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This starter handle aids the user in starting and shutting down the lawn mower safely. A new starter handle might be needed if the current one is damaged or broken in anyway. It is easy to replace this part. If the user is unable to start or shut down the appliance it might be faulty. Be sure to reference the owner's manual for detailed instructions on this replacement. Always be sure the engine is powered down before attempting to replace this part. This part is sold individually. It is also sourced directly from the manufacturer and is intended for different types of lawn mowers. This is also a genuine OEM replacement part.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This hairpin clip is a metal fastener, also known as a spring cotter or retaining pin. This is standard hardware that features a straight edge and an indentation to ensure secure attachment to desired parts or equipment. This reusable formed wire is easy to install and uninstall and has multiple applications. This part is commonly used in conjunction with clevis pins. This replacement hairpin clip comes in a polished finish. Use this genuine OEM replacement part on lawnmowers and tillers from Husqvarna, Craftsman, Murray, Weed Eater, Ryobi, Poulan and Poulan Pro. This item is priced and sold individually.

This genuine OEM part is a bushing for lawnmowers. The bushing is the plastic piece that goes into the wheel, allowing it to turn smoothly. If the wheels of the mower are no longer turning smoothly, the bushings might need to be replaced. Luckily, replacing a bushing is a relatively simple task.To replace the bushing, start by removing the wheel assembly from the mower. Unfasten the bolts that secure the wheel. Once removed, locate the old bushing and slide it out of its place. Slide the new bushing into the proper position. Reinstall the wheel assembly and make sure the bolts are tightened securely. Once secured, test to see if the wheel is rolling smoothly. If it is, then the installation was a success.This replacement part is sold individually and is compatible with Husqvarna brand lawnmowers.

This replacement part is a pulley. It is a genuine replacement part made by Husqvarna. This specific pulley is found in different appliances that require moving parts during use. Pulleys typically help in the movement between two parts so that the entire appliance is able to work effectively. A new pulley might be needed if the current one is not working properly or is damaged in any way. If the part is not working as well as normal, it could lead to excessive friction between components and eventually overheating or greater damage. If the user notices unusual noises coming from inside the machine it might be due to a malfunctioning idler pulley. Be sure to refer to the correct user manual prior to replacing this part. This part is sold individually. This pulley is sourced directly from the manufacturer. It is also a genuine OEM replacement part.

An interlock switch is responsible for shutting down the engine if the equipment is running in an unsafe manner. It is a safety component that prevents the engine from starting if you aren't pressing down the brake with your foot or if the parking brake isn't in place. If the interlock switch beaks, the current will no longer reach the solenoid coil even if the brake is depressed. This will result in the engine not starting. If turning the ignition key doesn't result in the click of the solenoid, the damaged part is likely the interlock switch. The first step is to disconnect the battery and then release the steering plate. Next, remove the interlock switch under the hood and install the new one. At this point, the other parts can be reinstalled, and the lawn mower can be used. This is a genuine manufacturer-approved OEM part that is designed for Husqvarna, Ryobi, Craftsman, Dixon, Weed Eater, Murray, Ariens, and Poulan lawn mowers. This interlock switch is made with a high-quality plastic body and is sold as an individual component. A screwdriver will be required to make this replacement.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.