Husqvarna Pruner Parts

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This is a genuine replacement ignition module for select Husqvarna lawn and garden equipment engines. The ignition module, also known as the armature-magneto, creates high voltage power in pulses, which then passes on to the spark plugs and allows them to create the spark to fire the engine. This part consists of the ignition coil and the spark plug boot, which is made with durable rubber and insulated metal. When the various components fail, the engine may not get the spark that it needs to turn over because the spark plug is not getting the power. A replacement will get the equipment running again. This OEM replacement part is designed for use on gas-powered blowers and string trimmers, including select models from Husqvarna, Poulan, Weed Eater, and Jonsered. The ignition module comes as a complete part and includes the boot assembly and coil, so no additional purchases will be required. Hardware is not included, however, and will need to be bought separately when it is needed. This unit is sold individually. The engine should be cool before doing any repairs and gloves should always be worn to protect the hands during engine repairs and parts replacements.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

This replacement part is a handle clamp. This is a genuine replacement part made by Husqvarna. This part works with the handle of many lawn mowers and is able to maintain the functions of the handle itself. A new handle clamp might be needed if the current one has become damaged. This can be due to normal wear and tear and should be replaced if this is the case. If the functions of the handle are no longer working properly, it might be due to a malfunctioning handle clamp. Work gloves are recommended to ensure safety during the repair job. Be sure the engine is completely shut down during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.