Husqvarna Pruner Parts

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

This genuine Husqvarna replacement part is an oiler for use with pruners and chainsaws. It is also known as an oil assembly or oil pump. Proper lubrication is essential for the safe and reliable use of a pruner or chainsaw. The oiler is used to provide oil to lubricate the sprocket and chain of the equipment.The sprocket or chain may become worn out or damaged if not properly lubricated, requiring a replacement. Proper oiling of these parts can extend the life of the pruner or chainsaw. Remember to check the sprocket and chain periodically to see if they are properly lubricated. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of Husqvarna, Craftsman, Weed Eater, and Poulan pruners and chainsaws.

This is a fuel pickup filter that sits inside the fuel tank of a chainsaw or small engine. It screens debris and contaminants from the fuel before it reaches the carburetor, ensuring clean fuel delivery. Replace this filter if the engine is running rough, stalling, losing power, or if the filter is visibly clogged or deteriorated.

Fixes loose or overly tight chains that slip or cause excessive friction. This bar adjustment kit restores proper chain tension. Easy DIY repair.

This is a coiled rewind spring that fits inside the recoil starter assembly of a string trimmer. It stores the energy needed to retract the starter rope after each pull, allowing the engine to be started repeatedly. Replace this spring if the pull cord does not retract on its own, feels loose, or if the spring is visibly broken or unwound.

Metal bolt that secures the bar to the chainsaw housing. Replace if corroded, stripped, damaged, or missing. Durable metal construction for reliable attachment.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.

Engine won't engage when pulling starter rope? The starter pawl bridge connects the flywheel to spin your trimmer's engine. Easy DIY repair.

The bar adjuster pin is located on the chainsaw body and allows proper tensioning of the guide bar and chain. Replace it if the chain becomes loose frequently, the pin is stripped or damaged, or if you cannot properly adjust chain tension.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Secures the guide bar to your chainsaw. Replace if stripped, corroded, or threads are damaged. Confirm fit with your model number before ordering.

Hex nut for chainsaw assembly. Secures components with screws and washers. Replace if stripped, corroded, or missing to restore proper fitment.

Replacement screw for line trimmers, edgers, chainsaws, and pruners. Replaces lost, damaged, or stripped screws in small engine assemblies. Sold individually.

Secures the fuel tank to the body of your leaf blower or trimmer. Replace if screw is missing, stripped, or damaged to keep fuel tank properly mounted.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.