Parts for Electrolux EI27BS26JB8: 15 - Ice Container Parts

Ice won't dispense or jams frequently? This ice dispenser auger rotates inside the bin to push cubes forward. Fixes slow or jammed dispensing issues.

Ice dispenser not crushing? This auger drive cam connects the motor to the crusher blades. Common fix for weak or no crushed ice output from dispenser.

Plastic ice bin that collects and stores ice made by your refrigerator's icemaker. Replace if cracked, broken, or missing to restore ice storage.

Ice dispenser not working or making grinding noises? A worn auger drive bar often causes dispensing failures. Moderate DIY fix with video guidance.

Replacement dispenser door gate that covers and seals the ice chute opening. Install this part when your existing gate is cracked, warped, or broken.

Ice won't dispense but door opens? This dispenser auger motor powers the auger that pushes ice through the chute. DIY-friendly repair with video guide.

Molded cabinet housing for refrigerator air handler assembly. Replace if cracked, broken, or damaged to restore proper structural support and airflow.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread

Spacer that fits between refrigerator door hinge components to maintain proper clearance and alignment. Replace if worn, cracked, or missing.

Refrigerator spacer maintains proper clearance and alignment between internal parts. Replace if worn, missing, or causing parts to rub or bind together.

Ice dispenser not crushing or jamming? This refrigerator ice crusher auger blade feeds and crushes ice cubes. Moderate DIY repair in 30-45 minutes.

Housing that forms the framework for the ice crusher assembly inside your refrigerator's ice bucket. Replace if cracked, broken, or damaged to restore proper support.

Replacement mounting screw for refrigerator panels, brackets, and trim. Secures loose or missing fasteners to stop rattles and keep components aligned.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabi

The Solenoid and Yoke Assembly is an OEM part for Frigidaire refrigerators. It is used in the ice dispensing system to control the movement of the ice chute, allowing ice to be dispensed from the refrigerator door.

Causes of a bad solenoid and

Control rod for bottom-mount refrigerators. Connects and operates internal mechanisms. Replace if bent, cracked, worn, or missing for proper operation.

Control rod spring for bottom-mount refrigerators. Replaces worn, broken, or missing springs that secure the control rod assembly. Direct fit part.

Secures and aligns the control console and electronics at the front of your refrigerator. Replace if the bracket is cracked, broken, or missing.

Fix rattling or misaligned fridge components with this anti-twist pin. Secures mating parts to prevent unwanted rotation and noise. Simple DIY fix.

Replacement spacer for refrigerator fixed blades. Installs between blade components to maintain proper spacing. Replace if cracked, broken, or missing.

Replacement auger nut for bottom-mount refrigerators. Secures the ice auger assembly in the ice maker dispenser. Order a new nut if original is stripped or missing.

Metal flat washer for refrigerator ice maker auger and other assemblies. Replaces worn, missing, or damaged washers during repairs and reassembly.

This E-ring is a small retaining clip used in Frigidaire refrigerators to hold components on a grooved shaft or pin. It keeps assemblies secure and operating smoothly by preventing parts from sliding off during normal use. What it does:

• Retains

Ice maker making loud buzzing noise or not producing ice? This cooling fan and gasket kit fixes frost buildup and motor issues. Moderate DIY repair.

H-shaped gasket seals evaporator housing to control airflow and reduce frost buildup. Replace if worn or cracked to restore cooling. Verify fit with model.

Ice buildup in fresh food section or around evaporator? This air handler housing kit stops warm-air leaks that cause frost and temperature swings. 30-min repair.

Ice buildup in fresh food section or around evaporator? This air handler housing kit stops warm-air leaks that cause frost and temperature swings. 30-min repair.

This washer is a flat metal spacer used with fasteners to distribute load and secure appliance components, helping maintain proper alignment and reduce wear on mounting surfaces. What it does

• Provides a smooth bearing surface between a bolt or nut and a component to prevent damage
• Helps keep fasteners tight and reduces loosening from vibration
• Restores proper spacing and alignment for parts that rely on a shim or spacer
• Commonly replaced when hardware is corroded, bent, or missing

• One flat washer

• Use appropriate hand tools and avoid over-torquing fasteners
• Disconnect power and follow appliance safety guidelines before servicing
• Replace damaged or corroded fasteners when installing this washer

Replacement ice bin assembly for refrigerators. Stores ice cubes made by the ice maker. Replace if cracked, broken, or damaged. Fits dispenser models.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread