Parts for Ge DFE29JSDASS: 07 - Ice Maker & Dispenser Parts

This hex washer-head screw is used in dishwashers to secure panels, brackets, and other hardware. Replacing a missing or corroded fastener restores a tight, stable installation and helps stop looseness or vibration during cycles.

• Fastens dishwasher panels, brackets, trim, or mounts to the cabinet/frame
• Replaces lost or stripped hardware after service or installation
• Helps address loose or rattling panels and minor misalignment
• Stainless steel construction per OEM spec for moisture-prone environments

• Disconnect power and water supply before servicing the dishwasher
• Wear gloves; sheet metal edges can be sharp
• Start threads by hand to avoid cross-threading; tighten with an appropriate driver
• Do not overtighten, especially when threading into plastic

Ice bucket and motor kit replaces a worn or cracked ice bin and its drive motor so your refrigerator can collect and advance ice properly. Restores ice storage and rotation for reliable dispensing. What it does:

• Holds and stores produced ice in the freezer's ice compartment.
• Drive motor rotates the bucket to advance ice toward the dispenser or ice chute.
• Replaces a cracked or damaged bin that leaks or chips ice.
• Helps stop symptoms such as a non-turning bucket, ice not dispensing, or unusual motor noise.

• Disconnect power to the appliance before starting any repair.
• Handle the bin and motor carefully to avoid damaging mounting tabs and electrical connections.
• Use basic hand tools; follow the OEM service manual or exploded parts diagram for correct removal and reassembly.
• After installation, reconnect power and cycle the ice maker to verify proper rotation and ice delivery.

The Icemaker is an OEM replacement part for GE refrigerators. It is responsible for producing and dispensing ice cubes, ensuring a constant supply of fresh ice for your beverages and other cooling needs.

Symptoms of a bad icemaker include:

• Not producing any ice or producing insufficient quantities
• Ice cubes that are misshapen, clumped together, or have an off-taste
• Leaks or water buildup in the icemaker compartment
• Strange noises or grinding sounds during ice production

Causes of a bad icemaker can include water supply issues, such as low water pressure or a blocked water line, electrical malfunctions, or mechanical problems with the icemaker components, like a faulty ice mold or ejector arm.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Cold water tank assembly stores and supplies chilled water to the refrigerator's dispenser and related water channels. Replacing a damaged reservoir helps stop leaks and restore reliable chilled water flow. What it does

• Holds chilled water for the dispenser and downstream water paths
• Routes supply and return lines through built-in inlet/outlet ports
• Common symptoms: leaking reservoir, little or no water from the dispenser, slow or inconsistent flow
• Use as a direct replacement when the existing tank is cracked, warped, or otherwise damaged

• Disconnect power and shut off the water supply before beginning service
• Drain the reservoir and place towels or a pan to catch residual water when removing the old tank
• Access may require removing interior panels or shelving; retain or inspect mounting hardware and seals for reuse

The Valve Dual Water is an OEM part for GE refrigerators, specifically designed to control the flow of water to both the icemaker and the water dispenser. This dual-function valve ensures that water is properly directed to the icemaker for ice production and to the dispenser for fresh drinking water, maintaining an optimal flow and pressure that is crucial for the refrigerator's operation. 

Over time, the dual water valve can fail due to mineral deposits from hard water, wear and tear from regular use, or electrical issues. A malfunctioning valve can disrupt the water supply to the ice maker and water dispenser, affecting their performance.

Symptoms of a bad Valve Dual Water include:

• No water dispensing at the dispenser
• Irregular or no ice production
• Leaks or drips from the water inlet area
• Unusual noises coming from the valve when it’s supposed to be operating

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Ice bucket and motor kit replaces a worn or cracked ice bin and its drive motor so your refrigerator can collect and advance ice properly. Restores ice storage and rotation for reliable dispensing. What it does:

• Holds and stores produced ice in the freezer's ice compartment.
• Drive motor rotates the bucket to advance ice toward the dispenser or ice chute.
• Replaces a cracked or damaged bin that leaks or chips ice.
• Helps stop symptoms such as a non-turning bucket, ice not dispensing, or unusual motor noise.

• Disconnect power to the appliance before starting any repair.
• Handle the bin and motor carefully to avoid damaging mounting tabs and electrical connections.
• Use basic hand tools; follow the OEM service manual or exploded parts diagram for correct removal and reassembly.
• After installation, reconnect power and cycle the ice maker to verify proper rotation and ice delivery.