Parts for Lg LFCS28768S/00: Ice Maker & Ice Bin Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Insulation duct for bottom-mount refrigerators. Installs inside the unit to help maintain temperature efficiency. Replace if cracked, torn, or missing.

This adjustable multi-direction duct assembly routes exhaust air and seals the dryer vent connection for proper airflow and reduced leakage. It replaces a worn or damaged duct to restore safe venting and consistent drying performance. What it does:

• Channels dryer exhaust to the vent outlet while keeping airflow focused and contained
• Adjustable/multi-direction design fits different cabinet orientations and vent locations
• Helps reduce air leaks and vibration caused by cracked or bent ducts
• Commonly replaced when dryers have poor drying results, excessive lint buildup at the cabinet opening, or unusual vibration/noise near the vent

• One duct assembly

• Disconnect power (and gas supply if applicable) before servicing
• Remove the dryer's rear or bottom access panel to reach the duct; follow the dryer's service manual for disassembly steps
• Use basic hand tools to remove clamps or screws; ensure all connections are sealed and secured after installation
• Inspect neighboring venting components and clean lint before reassembly; test the dryer on a short cycle to ensure correct airflow

Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Replace a cracked, broken, or worn refrigerator drawer tray assembly. Restores stable storage in your drawer compartment and keeps food contained.

Replaces cracked, damaged, or missing glass shelf in the fresh food compartment. Restores stable storage space for food and containers inside your fridge.

Replace a cracked, broken, or missing refrigerator shelf assembly. Restores storage space with a stable surface for food and containers.

This is the glass or clear panel that sits above the crisper drawers in the refrigerator compartment, acting as a shelf and helping regulate humidity for fruits and vegetables stored below. It also serves as a support surface for items placed on top of the drawers. Replace this cover if it is cracked, chipped, or broken, which can affect temperature and humidity control in the crisper area.

Replacement fresh room tray assembly for your refrigerator. Installs at the bottom of the fresh room drawer to contain spills and support produce storage.

Drawer slide rail guide assembly for refrigerator shelves and bins. Replaces worn, broken, or damaged rails that cause sticking or misalignment.

Protective tray cover for refrigerator interior. Shields tray from spills and debris while maintaining clean appearance. Replace if cracked, broken, or missing.

This is a decorative front panel that attaches to the deli or fresh food drawer inside the refrigerator. It serves as the visible face of the drawer and provides a handle area for opening and closing it. Replace this cover if it is cracked, warped, discolored, or if the mounting tabs have broken, causing the panel to detach from the drawer.

Replacement decor cover for bottom-mount refrigerators. Restores front trim appearance and conceals mounting hardware. Needed when original is cracked, dented, faded, or missing.

Refrigerator lamp cover protects the interior light bulb. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with model.

This is an LED circuit board assembly that provides interior lighting inside the refrigerator compartment. It mounts inside the unit and illuminates the interior when the door is opened. Replace this assembly if the refrigerator interior is dim or completely dark even though the door switch is functioning properly.

Keeps refrigerator drawers aligned and sliding smoothly. Replace if your drawer sticks, sags, or won't glide properly. Confirm fit with your model number.

Guide rail assembly for refrigerator drawers. Installs on drawer sides to keep drawers aligned and sliding smoothly. Replace if rails are cracked or worn.

Restores insulated core inside freezer door to maintain cold retention and reduce frost. Replace when door loses cooling efficiency or frost builds up.

Replace your worn freezer door gasket to restore an airtight seal. Keeps cold air in, reduces frost buildup, and maintains stable temperatures. Confirm fit with your model number before ordering.

Decorative cover for refrigerator door handle. Installs over the handle assembly to provide a finished appearance. Replace if cracked, discolored, or missing.

This decor handle is a cosmetic and functional door handle designed to replace a cracked, broken or worn handle and restore a secure grip and finished look to the appliance door. It installs in place of the original trim handle. What it does:

• Provides a finished grip for opening and closing the appliance door
• Replaces damaged, cracked or loose handles that affect use and appearance
• Restores proper alignment and user control when the original handle is worn
• Matches the appliance's exterior trim for a cohesive look

• Disconnect power to the appliance before starting any repair
• Remove any door trim or fasteners as needed to access mounting points
• Use the original screws or OEM-replacement fasteners; do not overtighten

Covers and protects the refrigerator door hinge assembly. Replace if cracked, broken, or missing to restore a clean finished look and shield hinge parts.

Covers and protects the door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look and shield wiring.

This name plate displays model and serial numbers on your refrigerator exterior. Replace if cracked, faded, peeling, or missing for proper identification.

Handle assembly for bottom-mount refrigerator freezer drawers. Includes handle and operating mechanism. Replace if cracked, broken, or loose from wear.

Fix excessive condensation or poor cooling with this refrigerator door foam insulation assembly. Restores temperature retention by replacing compressed foam.

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace when worn, cracked, or not sealing properly. Confirm fit.

Door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or no longer sealing properly. Confirm fit by model.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

Replace a cracked or broken door bin to restore secure storage. Mounts to the refrigerator door for organizing bottles, jars, and condiments.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replace a worn, loose, or broken refrigerator door handle with this complete handle assembly. It restores a secure, comfortable grip so you can open and close the refrigerator door easily while maintaining the unit's original look. What it does:

• Attaches to the refrigerator door to provide a sturdy handhold
• Replaces cracked, broken, or missing handles
• Helps correct a loose or wobbly handle that won't stay secure
• Restores the factory appearance of the door

• 1 refrigerator door handle assembly

• Disconnect power and protect the door surface with tape or a cloth before starting
• Remove any trim/caps as needed and loosen the hidden set screws or mounting bolts on the old handle
• Position the new handle, then tighten fasteners evenly—do not overtighten
• Reinstall any caps/trim and ensure the handle is secure

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this holder if it's cracked, broken, or missing to restore proper shelf support.

This slide rail is a replacement drawer guide that restores smooth, stable drawer movement and helps prevent binding or sagging. Designed to match the OEM fit so drawers open and close reliably. What it does:

• Guides and supports the appliance drawer for smooth sliding motion
• Replaces worn or damaged rails that cause sticking, sticking intermittently, or uneven travel
• Helps prevent drawer tilt or sag when loaded
• Restores proper alignment for secure closing

• Disconnect power to the appliance before beginning any work
• Remove the drawer per your model's service instructions to access the rail
• Use basic hand tools (screwdriver/driver) to remove and replace the rail; keep fasteners for reuse
• Align the rail carefully, slide the drawer to test operation, and verify smooth movement before returning the appliance to service

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

Fixes non-working dispenser or ice maker caused by damaged wiring. This harness assembly restores electrical connections between components. DIY-friendly repair.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Service spanner tool for refrigerator maintenance. Provides secure grip for loosening and tightening service fittings and retaining nuts. Replace if lost.

Secures and pivots the center refrigerator door for proper alignment and sealing. Replace if your door sags, won't close fully, or pivots roughly. Verify fit by model number before ordering.

Secures and pivots the upper refrigerator door for proper alignment and smooth opening. Replace if your door sags, won't close properly, or hinge is damaged. Verify fit by model number before ordering.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Right side upper hinge.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

The Thermistor Assembly is an OEM part for LG refrigerators. As a key component, it plays an integral role in monitoring and regulating interior temperatures. Consisting of a thermistor sensor and connection wire harness, it communicates real-time temperature readings to the control board. 

Symptoms of a bad thermistor assembly can include failure to properly detect temperature changes, causing inaccurate interior conditions, or affecting automatic defrost cycles. Breaks or shorts in the wiring can interrupt readings.

Causes of failure include general wear over time, damage from moisture exposure, or loose connections inhibiting communication. Thermistors may also fail prematurely in high-humidity environments.

Symptoms of a bad thermistor assembly include: 

• Inability to maintain set interior temperatures
• Frost or ice buildup inside with poor defrosting  
• Refrigerator failing to cool or cooling excessively
• Control panels displaying error codes relating to sensors

This OEM LG part is also compatible with Sears/Kenmore. 
 

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix loud fan noises or uneven cooling caused by a cracked fan guide. This support bracket stabilizes your refrigerator's evaporator fan for proper airflow.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Water pooling under your refrigerator? This drip tray collects condensation and defrost water to prevent leaks and water damage beneath the appliance.

Refrigerator not cooling properly? A faulty condenser assembly may be blocking heat release. This wire condenser restores cooling efficiency. DIY-friendly.

Fix uneven cooling or frost buildup with a refrigerator fan assembly. Restores proper airflow across coils to maintain consistent cabinet temperatures.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Protective grill cover that mounts over the refrigerator fan motor. Replace if the original grill is cracked, broken, or missing to restore proper airflow.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

Refrigerator light stays on or door alarm won't work? This magnet switch senses door position to control interior lighting and alerts. Quick DIY fix.

This DC motor drives the evaporator fan that circulates cold air from the evaporator coils throughout the refrigerator and freezer compartments. It is essential for maintaining even, consistent temperatures inside the unit. Replace this motor if the refrigerator is not cooling properly, the freezer is cold but the fresh food section is warm, or you hear unusual buzzing or grinding noises coming from behind the interior back panel.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

What's included:

• One cover motor

Install notes:

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Illuminates your refrigerator display for clear, even brightness. Replace when you notice dark spots, dim areas, or missing segments on the screen. Verify fit with your model number before ordering.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Refrigerator not cooling evenly or running constantly? This DC motor assembly drives the fan to restore proper airflow and temperature control in your fridge.

Fix a refrigerator that won't cool, has a blank display, or won't respond to controls. This main control board manages all electronic functions.

Control board not responding or exposed to moisture? This protective cover assembly shields your refrigerator's PCB from dust and damage. Easy install.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Fix no ice production, small/misshapen cubes, or overflowing ice with this complete ice maker assembly. Simple DIY install—just 2 screws. 15-30 min.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances. 

Ice maker not filling or overflowing? Water dispenser not working? This water inlet valve controls flow to your ice maker and dispenser. DIY fix in 30 min.

Replace your refrigerator's water filter cover to protect the filtration system and maintain proper seal. Check your model number for exact fit compatibility.

Connects and seals your refrigerator's water filter cartridge. Replace if you notice leaks around the filter or reduced water flow. Verify fit with your model.

Removes impurities and contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when water flow decreases. Verify fit with your model.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Replace your refrigerator's water filter cover to protect the filtration system and maintain proper seal. Essential when cover is cracked or missing. Confirm fit with your model number.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.