Parts for Lg LFCS28768S/00: Valve & Water Tube Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Insulation duct for bottom-mount refrigerators. Installs inside the unit to help maintain temperature efficiency. Replace if cracked, torn, or missing.

This adjustable multi-direction duct assembly routes exhaust air and seals the dryer vent connection for proper airflow and reduced leakage. It replaces a worn or damaged duct to restore safe venting and consistent drying performance. What it does:

• Channels dryer exhaust to the vent outlet while keeping airflow focused and contained
• Adjustable/multi-direction design fits different cabinet orientations and vent locations
• Helps reduce air leaks and vibration caused by cracked or bent ducts
• Commonly replaced when dryers have poor drying results, excessive lint buildup at the cabinet opening, or unusual vibration/noise near the vent

• One duct assembly

• Disconnect power (and gas supply if applicable) before servicing
• Remove the dryer's rear or bottom access panel to reach the duct; follow the dryer's service manual for disassembly steps
• Use basic hand tools to remove clamps or screws; ensure all connections are sealed and secured after installation
• Inspect neighboring venting components and clean lint before reassembly; test the dryer on a short cycle to ensure correct airflow

Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Replace a cracked, broken, or worn refrigerator drawer tray assembly. Restores stable storage in your drawer compartment and keeps food contained.

Replaces cracked, damaged, or missing glass shelf in the fresh food compartment. Restores stable storage space for food and containers inside your fridge.

Replaces the rear outer panel on your refrigerator. Restores finished appearance and protects internal components. Order a new cover if yours is cracked or missing.

Replace a cracked, broken, or missing refrigerator shelf assembly. Restores storage space with a stable surface for food and containers.

Replacement fresh room tray assembly for your refrigerator. Installs at the bottom of the fresh room drawer to contain spills and support produce storage.

Drawer slide rail guide assembly for refrigerator shelves and bins. Replaces worn, broken, or damaged rails that cause sticking or misalignment.

Protective tray cover for refrigerator interior. Shields tray from spills and debris while maintaining clean appearance. Replace if cracked, broken, or missing.

Deli drawer front cover panel for LG bottom-mount refrigerators. Replaces cracked, broken, or discolored decorative cover. Clips onto panel.

Replacement decor cover for bottom-mount refrigerators. Restores front trim appearance and conceals mounting hardware. Needed when original is cracked, dented, faded, or missing.

Refrigerator lamp cover protects the interior light bulb. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with model.

Replace your refrigerator's LED light assembly to restore bright, even interior illumination. Fixes dim or flickering lights. Confirm fit with your model.

Keeps refrigerator drawers aligned and sliding smoothly. Replace if your drawer sticks, sags, or won't glide properly. Confirm fit with your model number.

Guide rail assembly for refrigerator drawers. Installs on drawer sides to keep drawers aligned and sliding smoothly. Replace if rails are cracked or worn.

Restores insulated core inside freezer door to maintain cold retention and reduce frost. Replace when door loses cooling efficiency or frost builds up.

Replace your worn freezer door gasket to restore an airtight seal. Keeps cold air in, reduces frost buildup, and maintains stable temperatures. Confirm fit with your model number before ordering.

Decorative cover for refrigerator door handle. Installs over the handle assembly to provide a finished appearance. Replace if cracked, discolored, or missing.

Cosmetic door handle trim for refrigerator doors. Replaces cracked, broken, or worn handles to restore a secure grip and finished appearance.

Covers and protects the refrigerator door hinge assembly. Replace if cracked, broken, or missing to restore a clean finished look and shield hinge parts.

Covers and protects the door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look and shield wiring.

This name plate displays model and serial numbers on your refrigerator exterior. Replace if cracked, faded, peeling, or missing for proper identification.

Handle assembly for bottom-mount refrigerator freezer drawers. Includes handle and operating mechanism. Replace if cracked, broken, or loose from wear.

Fix excessive condensation or poor cooling with this refrigerator door foam insulation assembly. Restores temperature retention by replacing compressed foam.

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace when worn, cracked, or not sealing properly. Confirm fit.

Door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or no longer sealing properly. Confirm fit by model.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Refrigerator door basket organizes small items on the interior door. Replace if cracked, broken, or no longer securely holding contents during use.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Complete door handle assembly for bottom-mount and French door refrigerators. Replace cracked, bent, or loose handles to restore secure grip and door function.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this holder if it's cracked, broken, or missing to restore proper shelf support.

Replacement drawer slide rail for refrigerator freezer compartments. Restores smooth drawer gliding when original rail is cracked, broken, or worn out.

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

Fixes non-working dispenser or ice maker caused by damaged wiring. This harness assembly restores electrical connections between components. DIY-friendly repair.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Service spanner tool for refrigerator maintenance. Provides secure grip for loosening and tightening service fittings and retaining nuts. Replace if lost.

Secures and pivots the center refrigerator door for proper alignment and sealing. Replace if your door sags, won't close fully, or pivots roughly. Verify fit by model number before ordering.

Secures and pivots the upper refrigerator door for proper alignment and smooth opening. Replace if your door sags, won't close properly, or hinge is damaged. Verify fit by model number before ordering.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Upper door hinge for refrigerators. Mounts on the right side to secure the door. Replace if cracked, broken, or missing to restore proper door support.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

Compressor won't start? This thermistor assembly monitors temperature and signals the control board to start the compressor. Simple DIY swap.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix loud fan noises or uneven cooling caused by a cracked fan guide. This support bracket stabilizes your refrigerator's evaporator fan for proper airflow.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Water pooling under your refrigerator? This drip tray collects condensation and defrost water to prevent leaks and water damage beneath the appliance.

Refrigerator not cooling properly? A faulty condenser assembly may be blocking heat release. This wire condenser restores cooling efficiency. DIY-friendly.

Fix uneven cooling or frost buildup with a refrigerator fan assembly. Restores proper airflow across coils to maintain consistent cabinet temperatures.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Protective grill cover that mounts over the refrigerator fan motor. Replace if the original grill is cracked, broken, or missing to restore proper airflow.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

Refrigerator light stays on or door alarm won't work? This magnet switch senses door position to control interior lighting and alerts. Quick DIY fix.

Fix warm refrigerator or freezer temps with this evaporator fan motor assembly. Circulates cold air throughout compartments. Located behind freezer wall.

Powers the dispenser cover door mechanism on your refrigerator. Replace if the motor has worn out, failed, or no longer operates the cover smoothly.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Illuminates your refrigerator display for clear, even brightness. Replace when you notice dark spots, dim areas, or missing segments on the screen. Verify fit with your model number before ordering.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Refrigerator not cooling evenly or running constantly? This DC motor assembly drives the fan to restore proper airflow and temperature control in your fridge.

Fix a refrigerator that won't cool, has a blank display, or won't respond to controls. This main control board manages all electronic functions.

Control board not responding or exposed to moisture? This protective cover assembly shields your refrigerator's PCB from dust and damage. Easy install.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Fix no ice production, small/misshapen cubes, or overflowing ice with this complete ice maker assembly. Simple DIY install—just 2 screws. 15-30 min.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

Ice maker not filling or overflowing? Water dispenser not working? This water inlet valve controls flow to your ice maker and dispenser. DIY fix in 30 min.

Replace your refrigerator's water filter cover to protect the filtration system and maintain proper seal. Check your model number for exact fit compatibility.

Connects and seals your refrigerator's water filter cartridge. Replace if you notice leaks around the filter or reduced water flow. Verify fit with your model.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Replace your refrigerator's water filter cover to protect the filtration system and maintain proper seal. Essential when cover is cracked or missing. Confirm fit with your model number.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.