Parts for Lg LRFDC2406S/00: Ice Maker / Ice Bin Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement screw for securing refrigerator panels and trim pieces. Restores proper fit when original fasteners are damaged, missing, or stripped.

This rear door handle replaces the damaged or worn handle on compatible LG appliances, restoring a secure grip and proper door operation. Durable molded construction matches factory fit for a clean, factory-original appearance. What it does

• Replaces a cracked, loose, or broken rear door handle to restore safe door gripping and operation
• Provides the mounting surface and attachment points used by the factory rear handle assembly
• Helps eliminate rattling or misalignment caused by a damaged handle
• Fits where the original rear handle attaches to the appliance door frame

• One rear handle

• Basic hand tools required; remove power and follow factory service manual for safe disassembly
• Keep fasteners and clips in order; replace any damaged hardware with OEM parts
• Handle mounting faces the interior rear of the door—verify orientation before tightening

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Replacement mounting screw for refrigerator panels and brackets. Restores secure attachment when original fasteners are missing, stripped, or damaged.

This duct connector is the OEM-style assembly that links dryer exhaust sections or connects the dryer outlet to the vent duct, helping guide airflow out of the appliance and maintain a secure vent connection. What it does:

• Provides a secure connection between dryer exhaust outlet and vent ducting
• Helps direct hot, moist air safely out of the appliance vent system
• Reduces gaps that can cause air leaks or lint buildup at the connection
• Fits where the original connector attaches to the dryer vent assembly

• Turn off and unplug the appliance before attempting removal or installation
• Inspect surrounding ducting and lint traps; clean before reassembly to reduce fire risk

Replace your broken refrigerator drawer tray assembly to restore proper alignment and support for stored items. Includes complete tray structure. Verify fit with your model number before ordering.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

This is a single roller wheel assembly used to support and allow smooth movement of components such as drawers or bins inside the refrigerator. It ensures that parts glide easily when opened or closed. Replace this roller if drawers are sticking, wobbling, or no longer rolling smoothly.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Replace your cracked or worn refrigerator drawer tray assembly. This clear plastic tray restores secure food storage and smooth gliding in bottom-mount units.

Platform that supports and guides refrigerator storage drawers along slides. Replace if cracked, damaged, or broken to restore smooth drawer operation.

This supporter cover is a replacement internal bracket that helps secure the TV's back or front cover, restoring proper panel alignment and reducing movement. Fits where the cover needs a mounting or support point to sit flush and stable. What it does

• Provides structural support to the TV cover or bezel so panels align correctly.
• Prevents cover flexing or sagging that can cause gaps or rubbing.
• Helps stop rattling or vibration-related noise caused by loose cover panels.
• Restores proper mounting points for screws or clips that hold the cover in place.

• One supporter cover.

• Unplug the TV and place it on a soft, flat surface before beginning.
• Remove the external cover or bezel per the service manual to access the mounting location.
• Keep track of screws/clips; use the same hardware unless replacement is specified.

Outer cover that protects the tray area in your bottom-mount refrigerator. Replace if cracked, broken, or missing to restore proper fit and appearance.

Replace your refrigerator's shelf assembly if the original is cracked, broken, or missing. This shelf installs inside the fresh food compartment.

Reduces food odors in your refrigerator's fresh-food compartment by neutralizing smells at the source. Replace when odor control becomes less effective.

Replacement crisper drawer assembly for bottom-mount refrigerators. Installs in fresh food section to store vegetables and fruits. Order new if cracked or broken.

Vegetable crisper drawer assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing drawers in the lower fresh food compartment.

This is a cover assembly panel that attaches to the interior of the refrigerator to conceal internal components and provide a finished appearance. It helps protect wiring, sensors, or other mechanisms behind it from moisture and contact. Replace this cover if it is cracked, broken, or missing, which can leave internal parts exposed.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Replacement hinge cover for bottom-mount refrigerators. Conceals and protects door hinge mechanism. Order when original is cracked, broken, or missing.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.

Door foam assembly for bottom-mount refrigerators. Provides insulation and sealing between door panels. Replace if foam is compressed, damaged, or missing.

Cushions and seals your home bar door to maintain proper temperature and reduce noise. Replace when foam is compressed or damaged. Confirm fit with your model.

Home bar case assembly for bottom-mount refrigerators. Replaces damaged, cracked, or broken external home bar housing. Mounts on door exterior.

Replace a cracked or missing door stopper on your bottom-mount refrigerator. This plastic component prevents the door from overextending and damaging hinges.

Seals the Home Bar door-in-door panel to prevent warm air leaks, condensation, and temperature swings. Replace if cracked or loose. Confirm fit by model.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Plastic slide that supports and guides refrigerator or freezer drawers for smooth opening and closing. Replaces worn, broken, or cracked guides.

Front cover panel for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior covers. Restores appearance and protects components.

Refrigerator door basket that mounts inside the door to organize condiments and beverages. Replace if cracked, broken, or missing from your unit.

Replacement door basket for refrigerator doors. Restores storage space for bottles and small items. Replaces cracked, broken, or missing door bins.

Replacement door basket for refrigerator inner door. Holds bottles, jars, and condiments securely. Replaces cracked, broken, or missing baskets.

Replacement door basket for bottom-mount refrigerators. Snaps into inner door rails to hold condiments, bottles, and jars. Replaces cracked or missing bins.

Replacement door basket assembly for bottom-mount refrigerators. Organizes items in the door compartment. Replace if cracked, broken, or missing.

Replacement door basket assembly for refrigerator doors. Restores storage for bottles, jars, and condiments. Replaces cracked, broken, or missing bins.

Home bar door hinge for bottom-mount refrigerators. Installs on the home bar compartment door. Replace if cracked, broken, or won't hold door properly.

Stabilizes rotating assemblies in your refrigerator to reduce wobble, wear, and noise. Replace when you notice excessive movement or grinding sounds.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Mounts at the hinge to limit your refrigerator door's opening angle. Replace if cracked, broken, or missing to prevent over-swing and protect the hinge.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replace your cracked, scratched, or discolored refrigerator door handle. Installs on fresh food or freezer doors for a secure grip and updated look.

Replace a cracked, broken, or damaged refrigerator door handle. Installs on the refrigerator door to provide a secure grip for opening and closing.

Rail holder secures door shelves in your refrigerator. Replace this part if it's cracked, broken, or missing and shelves won't stay properly aligned.

Drawer rail connector for refrigerators. Secures and aligns the drawer slide rails to the cabinet frame. Replace if cracked, broken, or missing.

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Center hinge assembly for bottom-mount refrigerators. Supports and aligns the middle door. Replace if cracked, broken, or door sags. Direct fit.

Connects refrigerator doors and enables smooth opening and closing. Replace if hinge is cracked, broken, or worn from normal use or accidental damage.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Secures and aligns your refrigerator door at the top hinge point. Replace if door sags, binds, or seals unevenly. Confirm fit with your model number.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Upper hinge assembly supports your refrigerator door and ensures smooth opening. Replace when door sags or gaps appear. Verify fit with your model number.

Replaces damaged duct vent cap assembly on your refrigerator. Install when cap is cracked, broken, or missing to restore proper airflow. Verify fit with your model number before ordering.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Restores tension to your refrigerator door hinge for smooth operation. Replace this spring if your door sags, won't hold position, or shows wear.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Replacement door hinge spring for refrigerators. Provides tension for smooth door opening and secure closure. Replace if door sags or won't stay closed.

Display cover assembly for bottom-mount refrigerators. Protects and covers the control panel interface. Replace if cracked, broken, or scratched.

Internal bracket assembly that mounts and secures the door handle to your refrigerator door. Replace if the bracket is cracked, broken, or stripped threads.

Fix a dispenser lever that won't activate ice or water flow. This refrigerator dispenser lever restores easy push-button operation in minutes.

Refrigerator not cooling or running constantly? The compressor circulates refrigerant to maintain proper temperature. This repair requires expertise.

Fix a refrigerator that's not cooling properly or has ice buildup with this evaporator assembly. Moderately difficult repair requiring basic tools.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Replacement drip tray for bottom-mount refrigerators. Installs beneath the unit to catch condensation. Replace if cracked, missing, or worn out.

The Fan Motor Assembly is an OEM part for LG refrigerators. It is responsible for circulating air throughout the refrigerator and freezer compartments to maintain consistent temperatures. By ensuring proper airflow, the fan motor helps to keep your food fresh and evenly cooled.

Over time, fan motors can wear out or become damaged due to factors such as dust buildup, electrical issues, or general wear and tear from continuous use. A faulty fan motor can lead to uneven cooling, increased energy consumption, and potential spoilage of food.

Symptoms of a bad fan motor include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures in the fridge or freezer
• The refrigerator running constantly or cycling on and off frequently
• Frost buildup in the freezer section

This OEM LG part is also compatible with Sears/Kenmore.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

This drain tray assembly collects and channels defrost and condensation water away from the appliance to prevent interior pooling and leaking. It fits into the appliance base and helps maintain normal drainage during cooling cycles. What it does

• Catches defrost/condensation runoff and directs it to the drain path
• Prevents water from pooling under components or inside the cabinet
• Reduces risk of odors and mildew by keeping drainage contained
• Restores proper drainage when original tray is cracked, warped, or missing

• One drain tray assembly

• Disconnect power before starting any repair
• Remove access panels or shelving as needed to reach the tray; handle panels and edges carefully
• Ensure the tray is seated and aligned to the drain channel and any mounting tabs are engaged
• Inspect associated drain tube and seals; replace if damaged to ensure proper function

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Front cover assembly for bottom-mount refrigerators. Installs on the exterior or control area. Replace if cracked, broken, or cosmetically damaged.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

Fix a refrigerator that won't cool, has display errors, or temperature control issues with this electronic control board. Moderate DIY repair for bottom-mount models.

This is a temperature sensor assembly that monitors the internal temperature of the refrigerator compartment and relays readings to the control board. It helps regulate cooling cycles and defrost timing to maintain proper temperatures. Replace this sensor if your refrigerator is running too cold, too warm, not defrosting properly, or displaying error codes related to temperature.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Button holder for refrigerator control panels. Secures and positions buttons in place. Replace if cracked, broken, or missing for proper button function.

Cushioning bumper that installs on refrigerator door hinge to prevent hard closing. Replace if cracked, worn, or missing to restore quiet operation.

Exterior trim piece that covers fasteners and exposed edges on your refrigerator door. Replace if cracked, broken, or missing to restore a finished look.

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix a refrigerator that won't run or operates erratically with this DC motor assembly. Restores powered movement and control in bottom-mount models.

Fix frost buildup in your refrigerator with this defrost heater. Melts ice from evaporator coils to maintain proper cooling and prevent excessive frost.

Fix frost buildup in your bottom-mount refrigerator with this defrost heater. Restores proper defrost cycles. Moderate DIY repair, takes 1-2 hours.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

If your refrigerator won't power on or has intermittent electrical issues, the power cord assembly may need replacement. Simple plug-in repair.

Fix a non-functioning water or ice dispenser with this refrigerator dispenser control board. Controls solenoid valves and dispensing operations.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

The Ice Maker Assembly kit is an OEM replacement part for LG refrigerators. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.

Causes of failure can be mineral buildup affecting moving parts, wear from the motor over many harvest cycles, or damage to internal wiring from door mishandling.

Symptoms of a problematic ice maker include:

• Incomplete or below-normal ice production
• Ice cubes appearing oddly shaped or cloudy
• Strange noise or vibrations heard from inside the freezer
• Dispenser not functioning or unresponsive

This part is also compatible with some models from Sears/Kenmore.

Ice maker not producing ice or making small, malformed cubes? This ice maker assembly fixes inconsistent ice production. Moderately difficult repair.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Fan grill assembly houses the circulating fan in your refrigerator. Replace if the plastic grille is cracked, broken, or damaged from normal wear.

Ice bucket assembly collects and dispenses ice from your refrigerator. Replace if cracked, broken, or ice won't dispense properly. Verify fit with model number.

Rubber cap for bottom-mount refrigerators. Covers and protects screws, bolts, or openings. Replace if cracked, missing, or worn to restore appearance.

Fix a dispenser that won't activate or feels stuck with this refrigerator dispenser lever. Direct replacement part for bottom-mount models. Easy repair.

This is a complete ice maker assembly that includes the ice maker module and auger motor used to produce and dispense ice. It mounts inside the freezer compartment and automates the ice-making cycle from filling to ejecting ice into the storage bin. Replace this assembly if your refrigerator stops making ice, produces undersized or misshapen cubes, or if the dispenser auger motor no longer turns to push ice through the chute.

The Water Tank is an OEM part for LG refrigerators. It is responsible for storing and supplying water to the refrigerator's internal dispenser and ice maker. Made from food-grade plastic, the water tank is designed to hold water in a safe, sealed container.

Causes of a bad water tank can include cracks that develop over time, possibly from repeated fillings and drainings of the tank which lead to stress fractures. Mineral or sediment buildup may also cause issues.

Symptoms of a faulty water tank include:

• Leaks or water spillage inside the refrigerator 
• Inconsistent or disrupted water supply to the dispenser/icemaker
• Irritating noises from water sloshing around a damaged tank

This OEM LG part is also compatible with Sears/Kenmore refrigerator models. Proper installation of this replacement part will restore full water functionality.

Plastic water supply tube for bottom-mount refrigerators. Connects water line to dispenser or ice maker. Replace if cracked, leaking, or broken.

Plastic tube for refrigerator water or drain systems. Replace if cracked, broken, or leaking. Installs inside refrigerator cabinet or door assembly.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

This is a polyethylene (PE) plastic tube with a 1/4" outer diameter used to carry water within the refrigerator, typically connecting the water inlet valve to the ice maker or water dispenser. It provides a flexible, food-safe pathway for water flow. Replace this tubing if you notice leaks, cracks, kinks, or reduced water flow to the ice maker or dispenser.

Connects water tubing inside your refrigerator to supply the ice maker and water dispenser. Replace if cracked, leaking, or unable to hold tubing securely.

The Filter assembly,water is an OEM component specifically designed for LG refrigerator water filters. This assembly contains activated carbon blocks that remove impurities from the water supply as it flows through. 

Causes for replacement include normal filter exhaustion from heavy water use, or accidental damage. LG recommends changing the filter every 6 months for optimum performance.

Causes of a bad water filter assembly include:  

• Impurities detected in taste tests of dispensed water
• Slimy or unappealing buildup in water lines or dispenser area  
• Error codes or functionality issues with the dispenser

This OEM LG part is also compatible with select Sears/Kenmore refrigerators.

Ice maker not making ice or water dispenser weak? This water inlet valve assembly controls water flow to restore ice production and dispensing.

Fix ice maker overflows, water leaks, or no water to dispenser. This inlet valve controls water flow from your supply line. DIY-friendly repair.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Fix no water or ice issues with this refrigerator water valve assembly. Controls water flow to icemaker and dispenser. Moderate DIY repair in 30-45 minutes.

Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.

Fix water dispenser leaks or no ice with this inline water connector tube. Joins refrigerator water lines to restore secure flow. Simple repair.

Water line tube connector for bottom-mount refrigerators. Replaces cracked, leaking, or broken connectors that secure water supply tubing connections.

Fix water leaking from your refrigerator's filter area with a new filter head assembly. Solves filter connection issues and slow water flow. DIY repair.

Removes impurities and contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when water flow decreases. Verify fit with your model.

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

Replacement door hinge assembly for your refrigerator. Installs on the cabinet to support the door. Replace if cracked, bent, or worn for proper alignment.

Molded door shelf cover for the home bar compartment. Replaces cracked, broken, or missing covers. Installs on the refrigerator door for a finished look.

Secures and supports refrigerator door pivot for proper alignment and smooth operation. Replace when door sags, seals poorly, or binds. Confirm fit with model.

The Lever Cover is an OEM part for LG refrigerators. This cover fits neatly over the freezer door lock mechanism, protecting its internal lever and hardware.

Causes of a bad lever cover can include damage from regular opening and closing of the freezer door over time. Accidental impacts or heavy impacts from moving the refrigerator could also crack or weaken the plastic material.

Symptoms of a bad lever cover include:

• Exposure of the lock mechanism that allows dust and debris to enter
• Improper shielding of lock parts leading to potential jamming issues
• Cracking or breakage of the plastic allowing outside contaminants inside

This OEM LG part is also compatible with some Kenmore models.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

The Air Cleaner Filter Assembly is an OEM component for LG sidebar refrigerators. Containing a pre-filter and deodorizing carbon filter, this assembly removes dust, pollen, and odors from air circulated within the refrigerator interior.   

Causes of needing a replacement include wear from regular saturation of the carbon filter over time as it absorbs odors and extends the life of the appliance.

Symptoms requiring replacement are:

• Odors becoming noticeable inside the refrigerator   
• Accumulation of dust visible over shelves and drawers
• Poor air circulation with limited debris removal 

This OEM LG part is also compatible with some Kenmore models

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.