Parts for Lg LRMDC2306D/01: Ice Maker & Ice Bin Parts

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This inner freezer tray replaces a cracked, warped or missing tray to restore a flat storage surface and help keep frozen items organized. Designed to match the refrigerator's original fit and appearance for a seamless repair. What it does:

• Provides a stable, flat surface for storing frozen food and containers
• Replaces trays that are cracked, warped or no longer seating properly
• Helps prevent items from shifting or falling through vents or shelf gaps
• Restores proper stacking and organization inside the freezer compartment

• Remove all contents from the tray area before installing
• Slide or snap the tray into the existing shelf supports; no special tools typically required
• Handle edges carefully to avoid breakage; wear gloves if needed

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This supporter cover is a replacement internal bracket that helps secure the TV's back or front cover, restoring proper panel alignment and reducing movement. Fits where the cover needs a mounting or support point to sit flush and stable. What it does

• Provides structural support to the TV cover or bezel so panels align correctly.
• Prevents cover flexing or sagging that can cause gaps or rubbing.
• Helps stop rattling or vibration-related noise caused by loose cover panels.
• Restores proper mounting points for screws or clips that hold the cover in place.

• One supporter cover.

• Unplug the TV and place it on a soft, flat surface before beginning.
• Remove the external cover or bezel per the service manual to access the mounting location.
• Keep track of screws/clips; use the same hardware unless replacement is specified.

This deodorizer assembly helps reduce food odors inside the fresh-food compartment by neutralizing smells at the source for a fresher-smelling refrigerator interior. Designed to fit into the factory deodorizer housing and integrate with the fridge's air system. What it does

• Contains the deodorizing element that helps neutralize common food odors in the refrigerator compartment
• Works with the appliance's air circulation to continuously treat internal air and reduce lingering smells
• Commonly replaced when odors persist despite cleaning or after the deodorizer element has reached end of life
• Matches the original shape and connectors to restore proper fit and function

• Disconnect power to the refrigerator before attempting removal or installation to avoid electrical shock
• Access typically requires removing the deodorizer cover inside the fresh-food compartment or freezer—handle panels and clips carefully
• Avoid exposing the deodorizer element to water; replace the entire assembly if the element is saturated or damaged
• Reassemble panels and restore power, then allow the refrigerator to run for a few hours before evaluating odor reduction

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

The Air Cleaner Filter Assembly is an OEM component for LG sidebar refrigerators. Containing a pre-filter and deodorizing carbon filter, this assembly removes dust, pollen, and odors from air circulated within the refrigerator interior.   

Causes of needing a replacement include wear from regular saturation of the carbon filter over time as it absorbs odors and extends the life of the appliance.

Symptoms requiring replacement are:

• Odors becoming noticeable inside the refrigerator   
• Accumulation of dust visible over shelves and drawers
• Poor air circulation with limited debris removal 

This OEM LG part is also compatible with some Kenmore models

This cover assembly replaces the TV's outer housing panel to protect internal components and restore the set's finished appearance. It helps keep circuitry shielded and prevents dust, debris, and accidental contact. What it does:

• Replaces a cracked, dented or missing TV housing panel to restore structural protection and appearance
• Shields PCB and power components from dust and accidental contact
• Stops rattling or vibration caused by a damaged or loose outer cover
• Restores mounting points for trim and back-panel fasteners so the set closes securely

• Disconnect power and place the TV face-down on a soft, protected surface before starting
• Remove exterior screws and any trim pieces to access the old cover; save fasteners unless replacements are provided
• Handle with care to avoid scratching the finish or damaging internal ribbon cables and connectors

This lamp cover is the replacement light lens that protects and diffuses the appliance's internal lamp, restoring even illumination and shielding the bulb from moisture and debris. It's a direct-fit exterior lens for the lamp assembly. What it does:

• Protects the interior lamp from dust, moisture and impact to help prevent bulb damage
• Diffuses and directs light for even illumination inside the compartment
• Restores a cracked, yellowed or missing lens to improve visibility
• Helps maintain the lamp assembly's proper fit and alignment

• One lamp cover / light lens

• Power off and unplug the appliance before beginning any service
• Remove lamp bulb per manufacturer instructions before replacing the cover to avoid damage
• Use proper tools and handle the lens gently to avoid scratching or cracking
• If mounting clips or screws are worn or missing, replace them separately

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

Restore a tight, reliable seal on your refrigerator door with this Door Gasket Assembly. Replacing a worn or damaged gasket helps the unit hold temperature, reduce energy loss, and minimize condensation and frost around the door opening. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain stable internal temperatures and efficiency
• Reduces moisture/condensation around the door area
• Limits frost or ice buildup caused by air leaks
• Common symptoms include tears, gaps, hardening, or a door not closing flush

• 1 door gasket assembly

• Unplug the refrigerator and clear door bins for easier access
• Let the new gasket relax flat; warm gently with a hair dryer or warm water to smooth kinks
• Press the gasket fully into the retainer/channel, starting at the corners and working evenly
• Close the door and check the seal all around; allow up to 24 hours for the gasket to conform

Restore a tight door seal and stop air leaks. This door gasket assembly forms the perimeter seal around the cabinet opening, helping maintain correct temperatures, reduce frost and condensation, and support efficient operation.

• Creates an airtight seal between the door and cabinet to keep conditioned air in
• Helps maintain stable internal temperatures and humidity
• Reduces frost/ice buildup and condensation around the door area
• Common symptoms of a failed gasket include tears, warping, gaps, doors not closing fully, moisture inside, or longer run times

• Disconnect power before servicing the appliance
• Let the new gasket warm and relax (room temperature or warm water); use low heat only if needed to smooth folds
• Start at the corners and press the gasket lip fully into the door's retainer channel, working evenly around
• Adjust door alignment if needed and allow time for the gasket to conform

A decorative door trim handle that restores the look and grip of your appliance door. Replaces scratched, cracked or worn trim so the door looks finished and is easier to open. What it does

• Provides the exterior trim/handle piece used to open and close the appliance door.
• Restores a secure grip when original trim is cracked, broken or loose.
• Improves appearance by replacing scratched or dented decorative trim.
• Works with the factory mounting points for a direct-fit replacement.

• One decor handle (trim) piece as shown.

• Disconnect power (and water supply for refrigerators with water/ice) before starting.
• Remove any trim covers or screws holding the old handle; handle may snap or screw off depending on model.
• Align replacement trim to factory mounting points and secure with original fasteners.

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This freezer door handle is a direct replacement designed to restore a secure grip and the factory appearance of your refrigerator freezer door. Use it to replace a cracked, loose, or missing handle so the door opens reliably. What it does:

• Provides a secure handhold for opening and closing the freezer door
• Replaces cracked, broken, or loose handles that interfere with normal use
• Restores the finished look of the freezer door for a factory appearance
• Matches OEM fit and mounting points for straightforward replacement on compatible models

• Remove food and support the door before removing the old handle to prevent damage or injury
• Keep original fasteners and trim; reinstall in the same orientation for proper fit
• Use appropriate hand tools and avoid overtightening screws to prevent cosmetic damage

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This door foam assembly replaces the foam insulation inside a refrigerator door to restore proper fit and reduce drafts, rattles, and minor condensation. It helps the door close more evenly and maintain interior temperature. What it does:

• Replaces the foam insulation core inside a refrigerator door
• Restores proper door fit and seal alignment to reduce air leaks
• Reduces door vibration and rattling caused by degraded or missing foam
• Helps limit minor surface condensation by improving insulation

• One door foam assembly as shown

• Intended for refrigerator door interior service panels; access may require removing the door liner/panel
• Follow manufacturer service manual steps for panel removal to avoid damaging clips or wiring
• Disconnect power to the appliance if working near electrical components or lights
• If adhesive or sealant is used, allow recommended cure time before closing the door fully

This case assembly for the home bar area replaces the molded housing that supports the bar dispenser components and provides a finished interior opening. Restores secure mounting and proper alignment for the bar access area. What it does

• Replaces the molded housing that surrounds the home bar access, ensuring components sit securely
• Helps stop rattling, misalignment, and gaps around the bar opening
• Restores proper fit and finish for the bar area to prevent air leaks and moisture intrusion
• Supports attached parts such as liners, trim, or dispensing components

• High-level replacement — remove power and empty the area before servicing
• Handle panels and trim carefully to avoid cracking plastic; use appropriate trim tools
• Use existing fasteners unless new hardware is explicitly included

This door stopper cushions and limits a refrigerator or appliance door's movement to reduce slamming and protect the cabinet and hinge. It restores smooth, quiet door closing and helps keep the door aligned. What it does

• Absorbs impact when the door is opened or closed to prevent slamming and wear.
• Limits door travel to protect hinges and adjacent cabinet surfaces.
• Helps maintain proper door alignment for a better seal and quieter operation.
• Commonly replaced when the stopper is worn, cracked, or missing.

• One door stopper

• Disconnect power to the appliance or follow manufacturer safety guidance before servicing.
• Typically attaches at the door or frame with a screw or snap fit; remove trim or access panels if needed.
• Inspect surrounding mounting area and replace any worn fasteners or brackets.

Replace a worn home bar door gasket to restore a tight seal and maintain proper cooling in the home bar compartment. This replacement gasket helps prevent cold air loss, reduce condensation, and improve temperature consistency. What it does:

• Creates an airtight seal around the home bar door to keep cold air in and warm air out.
• Helps reduce frost buildup, interior condensation, and uneven temperatures.
• Restores proper door contact to improve cooling performance and reduce strain on the compressor.
• Recommended when the gasket is cracked, torn, warped, or no longer seals evenly.

• Disconnect power to the appliance before beginning any service.
• Clean the door frame and mating surface before installing the new gasket for a proper seal.
• Remove the old gasket and press the new gasket into place evenly; check that the seal is continuous around the door.

This refrigerator door gasket seals the door to the cabinet to keep cold air in and humid air out. Replacing a worn or torn seal restores proper temperatures, reduces frost and condensation, and helps the unit run efficiently.

• Creates an airtight seal between the door and cabinet perimeter
• Helps maintain internal temperature stability and energy efficiency
• Reduces frost/ice buildup and moisture around the door opening
• Common symptoms: visible tears or warping, gaps, door not sealing, warm spots, frost or condensation near the door

• Unplug the appliance before servicing
• Let the new gasket relax flat at room temperature, or gently warm it to make it more pliable
• Clean the sealing surfaces; seat corners first, then work evenly along the sides
• Close the door and check for uniform contact all around; adjust as needed for a consistent seal

This refrigerator door gasket assembly restores a tight, even seal around the door. A proper seal keeps cold air in and moisture out, helping maintain temperature, reduce frost and condensation, and prevent warm spots around the perimeter.

• Forms a continuous seal between the door and cabinet to prevent air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost/ice and condensation near the door area
• Replace if the gasket is torn, cracked, deformed, or won't sit flat
• Symptoms include gaps around the door, moisture on the gasket, frost buildup, or a door that won't close/seal properly

• Unplug the refrigerator before servicing
• Let the new gasket relax; use warm water or low heat to remove shipping creases
• Insert the gasket lip fully into the door's channel, starting at the corners, then work along the sides
• After installation, close the door and check for uniform contact all around; adjust the gasket as needed

This front plate assembly is the exterior trim piece that restores the appliance's front surface and protects internal components from dirt and damage. It improves appearance and helps maintain a proper seal and alignment. What it does:

• Replaces a cracked, dented, or missing front plate to restore the unit's exterior finish
• Shields controls and internal components from dust, spills, and everyday wear
• Helps maintain proper fit and alignment of adjacent panels and trim
• Returns the appliance to a finished, factory appearance

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removal of adjacent trim or the control bezel; keep all screws and fasteners for reinstallation.
• Handle the plate carefully to avoid scratching the finish during installation.

This door basket is a replacement inner refrigerator door bin that restores storage on the door and keeps bottles, jars, and condiments secure. It fits where the original door shelf bin is damaged or missing. What it does:

• Replaces a cracked, broken, or missing door shelf bin to restore door storage capacity
• Secures bottles, jars and small containers to prevent shifting during door use
• Restores damaged or worn mounting tabs so the bin holds firmly in place
• Helps eliminate rattling or items falling from the door shelf

• Remove food and move adjacent shelves before replacing the bin
• Align mounting tabs with door slots and snap into place; secure gently without forcing
• Inspect door mounts for damage; replace mounting hardware if tabs are broken
• Unplug the appliance or turn off power to the unit before working in tight or electrical areas

This replacement door basket restores secure, organized storage on your refrigerator door. It snaps into the inner door rails to hold condiments, bottles, and jars when the original bin is cracked, loose, or missing.

• Mounts on the refrigerator door liner to store bottles, jars, and condiments
• Replaces a cracked, warped, or missing bin; restores a snug, level fit
• Helps prevent items from tipping or falling during door use
• Common signs include broken side tabs, the bin falling off the door, or not seating correctly

• Empty the shelf and open the door fully to reduce strain
• Align the side tabs with the door liner rails at the correct height; lower until it seats
• Do not force; handle plastic edges carefully to avoid cracks
• Avoid overloading the new bin after installation

The Basket Assembly is an OEM component specifically designed for LG Door-in-Door refrigerators containing bottom-mounted crisper drawers. This integral assembly organizes stored items within the refrigerator doorway.

Symptoms of a bad basket assembly include:

• Cracked or broken perforated shelves  
• Detached mounting brackets failing to secure basket
• Warped contours no longer fitting base compartment
• Missing attachments inhibiting proper installation

Causes of failure involve stresses from repeated loading/unloading cycles, mineral buildup weakening plastic brackets over time, or impact damage compromising structural integrity.

Replace yours today with this genuine OEM LG assembly to maintain tidy organizational capacity. Precision slots provide adjustable shelf positioning optimized for produce, snacks, and beverages. Compatible across Samsung, Frigidaire, and GE models featuring removable door crisper baskets.

This refrigerator door basket assembly replaces a cracked or missing door bin to restore secure storage for bottles, jars, and condiments. It mounts to the door liner to keep items organized and easy to reach. What it does:

• Attaches to the door liner to provide shelf-style storage
• Restores lost capacity and organization when a bin is broken or missing
• Helps keep beverages and condiments stable during door movement
• Common symptoms: cracked plastic, broken locking tabs, bin won't stay seated, items falling, door interference

• 1 door basket assembly

• Unplug the refrigerator and remove items from the affected bin area
• Lift the old bin straight up to disengage the tabs, then pull it out
• Align the new bin with the door liner mounts and press down until fully seated
• Verify the door closes freely and avoid overloading the new bin

This door stopper cushions and limits the appliance door's movement to help prevent slamming, misalignment, and wear. A small replacement part that restores smoother, quieter door operation. What it does:

• Absorbs impact when the door closes to reduce noise and shock
• Keeps the door from over-travel that can cause misalignment or rubbing
• Helps the door latch and seal properly by stabilizing movement
• Stops rattling or binding caused by a worn or broken stopper

• Disconnect power to the appliance before starting any repair
• Access may require opening or removing the door or a trim panel; use basic hand tools
• Remove the old stopper and install the replacement in the same position and orientation

This Door Stopper is the hinge-mounted stop that limits your refrigerator door's swing. Replacing a worn or broken stopper restores smooth, controlled movement and helps protect hinges and nearby cabinetry from overextension. What it does:

• Controls the door opening angle on the hinge to prevent overextending
• Helps maintain door alignment for a reliable seal and smooth closing
• Reduces clunking or clicking at the hinge caused by a worn stop
• Replace if the door swings too far, binds, won't close smoothly, or the stopper is cracked/missing

• 1 door stopper

• Disconnect power and support the door to relieve hinge load before service
• Remove hinge cover/fasteners as needed and note the old stopper's orientation
• Install the new stopper on the hinge/bracket, reassemble, and check door travel
• Verify the door seals fully and opens within the normal range

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This handle assembly replaces a worn, broken, or missing refrigerator door handle to restore a secure grip and smooth opening. It mounts to the fridge door to return the appliance to normal use and appearance. What it does:

• Provides a finished, easy-to-grip handle for opening and closing the refrigerator door
• Replaces cracked, loose, or damaged handles that catch or wiggle when used
• Restores proper leverage for safe door operation and prevents further cabinet or trim damage
• Matches OEM fit and mounting points for straightforward replacement

• Disconnect power to the appliance or follow the manufacturer's safety guidance before starting work
• Remove food and any door-mounted items for easier access and to prevent spills
• Use the correct hand tools and avoid overtightening fasteners to prevent handle or door damage

This connector rail is a small replacement connector used to join or secure the wiring/harness along the appliance rail, helping maintain proper electrical routing and stable connections for reliable operation. What it does:

• Provides a secure connection point along a mounting rail to keep wiring harnesses routed and supported
• Helps prevent wires from snagging, rubbing, or becoming disconnected during use or door movement
• Reduces strain on terminals and harness ends by keeping wiring aligned and restrained
• Commonly replaced when cracked, broken, or when the connector no longer holds the harness securely

• One connector rail

• Disconnect power to the appliance before inspecting or replacing wiring components
• Replace only the listed connector;
• Use basic hand tools and avoid stretching or pinching the harness when installing
• If you find damaged wiring or terminals, repair or replace those parts before restoring power

This slide rail guides and supports a single appliance drawer or pull-out door so it opens and closes smoothly and stays aligned. Replaces a worn, bent, or noisy guide to restore proper movement and stability. What it does:

• Provides a rolling/sliding track for a drawer or pull-out door to travel smoothly
• Replaces damaged or worn rail that causes sticking, misalignment, or uneven movement
• Helps keep the drawer properly supported and prevents sagging or binding
• Works as a direct-fit replacement when the original rail is broken or worn

• One slide rail (single left or right guide)

• Disconnect power and empty the drawer before starting repairs
• Typical installation requires removing the drawer and fastening the rail with existing screws or clips
• Inspect mating hardware and replace any stripped screws or broken clips for secure fit

This slide rail is a direct-fit replacement that restores smooth, reliable movement to a refrigerator or freezer drawer. It replaces a worn or broken glide so the drawer opens and closes without sticking or sagging. What it does:

• Replaces a damaged or worn drawer glide to restore proper sliding action
• Supports the drawer to keep it level and reduce binding or sticking
• Reduces noise from grinding or scraping during drawer movement
• Helps maintain correct drawer alignment for proper sealing and operation

• Verify left/right orientation and part number before installation
• Remove contents and disconnect power if working near electrical components
• Typical installation uses existing mounting points and hardware; save original fasteners when possible

This ice maker drive gear engages the ice maker's motor to rotate the ejector and harvest ice, restoring proper ice release and ejection. Ideal for common ice-maker failures where the tray doesn't cycle. What it does:

• Transfers motor torque to the ice ejector, allowing the ice maker to harvest and eject cubes
• Commonly used when the ice maker stops cycling or fails to eject ice
• Can reduce grinding or clicking noises if the original gear is stripped or worn
• Works with the ice maker's harvest and fill sequence to maintain normal operation

• Power off and unplug the refrigerator before beginning service
• Remove the ice maker assembly per manufacturer instructions to access the gear
• Inspect mating gears and motor shaft for wear; replace any damaged parts to prevent repeat failure

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

This center hinge assembly replaces the middle hinge that supports and aligns refrigerator doors so they open and close smoothly. It restores proper door height and helps maintain an even seal for efficient cooling. What it does:

• Supports the refrigerator door at the center pivot point to prevent sagging and misalignment
• Keeps doors properly aligned so gaskets meet evenly and the door seals correctly
• Reduces noise or binding when opening and closing a door
• Restores stable door movement after a worn or damaged hinge

• One center hinge assembly

• Disconnect power and empty doors or support contents before removing the door
• Removing and reinstalling doors may require two people to prevent damage or injury
• Use existing mounting hardware if in good condition; replace any stripped or damaged fasteners

The Center Hinge Assembly is an OEM part for LG refrigerators. This center hinge is an important joining component that allows the refrigerator doors to open and close smoothly. 

Symptoms of a bad center hinge include:

• Doors failing to close or align properly 
• Excessive sagging or uneven opening/closing of doors
• Louder than normal operation noises  
• Doors difficult to open fully or restricting access 

Causes of failure can be general wear over time, stresses from heavy loads placed on doors, or accidental damage.

Replace yours today with this genuine OEM LG assembly to restore reliable door operation. Proper door alignment is crucial to maintaining proper cooling and sealing. This replacement part is compatible with Samsung, GE, and Kenmore refrigerators.

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This upper hinge assembly secures and guides the appliance door at the top, restoring correct door alignment and smooth opening. Replace a worn or damaged hinge to stop door sagging and improve sealing and operation. What it does:

• Supports the top of the door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly during opening and closing
• Prevents or corrects door sag, rubbing, or uneven gaps that can affect sealing
• Stops grinding, squeaking, or binding caused by a damaged hinge

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door while removing and installing the hinge to prevent dropping or injury
• Use basic hand tools; follow the appliance service manual for torque and alignment steps

This upper hinge assembly secures and allows the refrigerator door to pivot smoothly, restoring proper door alignment and sealing. It replaces worn or damaged upper hinge hardware to stop sagging or uneven door movement. What it does:

• Supports the top of the refrigerator door and provides the pivot point for opening and closing
• Restores proper door alignment and helps the door form a tight seal when closed
• Stops symptoms such as a sagging or tilted door, door rubbing, or uneven movement
• Durable metal/plastic construction resists wear from regular use

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door before removing the hinge to prevent it from falling
• Reuse any original screws/fasteners only if undamaged; replace damaged fasteners

The Link is an OEM part for LG refrigerators. It serves as an integral connector between the refrigerator door and cabinet, facilitating smooth opening and closing of the door. With durable construction and precise engineering, the link is designed to withstand the rigorous motion of hundreds of door openings without compromising functionality. 

Symptoms of a bad link include:

• Doors that do not close or seal properly 
• Excessive noise or vibration from the door area
• Damage, bending, or breakage of the connecting pieces
• Misalignment impairing proper door operation

Causes can stem from normal wear and tear over many years of use. Replacing a faulty link restores the refrigerator door's designed motion for convenient access to the interior.

This OEM LG part fits seamlessly while extending the product's useful life. This part is also compatible with Kenmore models featuring LG's refrigerator link assembly design.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure

This replacement spring provides the tension for a door hinge, helping the door open smoothly and stay closed for a proper seal and consistent appliance performance.

• Applies controlled tension to the hinge mechanism for smooth door movement
• Helps the door stay closed and aligned against the gasket
• Worn or broken spring symptoms can include the door dropping open, not staying closed, an uneven gap, or squeaking/binding at the hinge
• Restores normal feel and operation to the door

• Disconnect power and allow the appliance to cool completely before servicing
• Support the door; removal of the door or hinge arm may be required
• Use caution—hinge springs are under significant tension; wear gloves and eye protection
• Replacing both springs together helps maintain balanced tension

The Door Handle Holder Assembly is an OEM replacement part for LG refrigerators. It contains the internal brackets and mounting hardware required to securely attach the refrigerator door handles.

Causes of a faulty door handle holder assembly include wear from years of use, broken or stripped screws, or cracks in the plastic from heavy pulling or slamming.

Symptoms of a problematic door handle holder assembly are:

• Loose, wobbly or disconnected door handles  
• Difficulty opening the refrigerator door 
• Handles that do not stay flush or feel secure

This OEM LG replacement is compatible with select Kenmore side-by-side refrigerator models as well.

This lever-style button is the user-facing push control that engages a mechanism when pressed, restoring proper control input and tactile feedback. It's a direct-replacement component used where a worn or broken button prevents normal operation. What it does:

• Provides a firm, responsive surface for pressing controls or releasing a latch
• Restores proper mechanical engagement when original button is cracked, loose, or missing
• Helps eliminate intermittent or non-responsive button presses caused by damaged button parts
• Matches OEM fit and function to maintain original user interface feel

• One lever-style push button

• High-level replacement; most installations require removing the control panel or trim to access the button
• Power off and unplug the appliance before beginning work to avoid shock or injury
• Handle small plastic parts carefully to avoid damage; test button function before reassembling all panels

This overload protector is a compressor safety device that helps stop the compressor if it draws too much current or overheats, preventing damage and helping the refrigerator system run safely. What it does:

• Interrupts compressor power during excessive current draw or overheating to protect the compressor motor
• Can prevent short cycling and repeated restart attempts that damage the compressor
• Commonly replaced when compressor hums but will not start, or when the appliance stops cooling due to compressor protection
• Works as part of the compressor start/protection assembly alongside the start relay and capacitor

• Disconnect power to the appliance before accessing the compressor or electrical components
• Handle terminals carefully and reconnect to the matching terminals only; do not modify leads
• Verify the part number against the existing component before installation

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

This fan guide directs airflow inside the appliance to improve cooling efficiency and protect the fan assembly. It replaces a worn or broken guide so the fan blades run without rubbing and airflow stays properly channeled. What it does:

• Channels air from the fan to the correct internal passageways for consistent cooling
• Keeps fan blades centered and prevents contact with surrounding components
• Helps reduce vibration and noise caused by a damaged or loose guide
• Common symptom: noisy fan, blade rubbing, or uneven cooling in the compartment

• One replacement fan guide

• Disconnect power before servicing to avoid shock or injury
• Remove access panels and the fan assembly to reach the guide
• Inspect adjacent fan blades and mounts for damage; replace any worn parts
• Reassemble panels and test operation before returning appliance to service

The Fan Motor Assembly is an OEM part for LG refrigerators. It is responsible for circulating air throughout the refrigerator and freezer compartments to maintain consistent temperatures. By ensuring proper airflow, the fan motor helps to keep your food fresh and evenly cooled.

Over time, fan motors can wear out or become damaged due to factors such as dust buildup, electrical issues, or general wear and tear from continuous use. A faulty fan motor can lead to uneven cooling, increased energy consumption, and potential spoilage of food.

Symptoms of a bad fan motor include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures in the fridge or freezer
• The refrigerator running constantly or cycling on and off frequently
• Frost buildup in the freezer section

This OEM LG part is also compatible with Sears/Kenmore.

This rear machinery cover protects the washer's motor and drive components from debris and accidental contact, keeping internal parts enclosed for safer, more reliable operation. What it does:

• Covers and shields the motor, drive shaft and associated machinery at the back of the tub
• Helps keep lint, dust and small objects away from moving parts
• Reduces risk of accidental contact when accessing the rear cabinet
• Can reduce exposure of electrical connections to incidental moisture or debris

• One rear machinery cover assembly

• Disconnect power to the appliance before beginning any service
• Remove the cabinet or rear access panel as required to reach mounting locations
• Handle carefully to avoid bending tabs; secure with factory screws or clips

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

The Drier Assembly is an OEM part for LG refrigerators. This part removes moisture and contaminants from the refrigerant, ensuring the system operates efficiently and effectively. The drier assembly helps maintain the proper function of the compressor and other cooling components, contributing to the longevity and performance of the refrigerator.

Causes of a bad drier assembly can include clogs from debris, wear and tear over time, or contamination from moisture or refrigerant leaks.  

Symptoms of a bad drier assembly include:

• The refrigerator not cooling properly
• Frost or ice buildup on the evaporator coils
• Increased noise from the compressor
• Reduced efficiency and higher energy consumption
• You should replace the drier assembly if it becomes faulty or damaged.

This OEM LG part is also compatible with select Sears/Kenmore models.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

The SWITCH, MAGNET is an OEM part for LG refrigerators. It is a switch designed to function in conjunction with the magnetic door seal, indicating to the refrigerator when the door is open or closed. This allows the refrigerator to regulate temperatures properly based on door positioning. 

Symptoms of a bad switch, magnet can include:

•  Temperature control issues, with the fridge struggling to maintain proper coolness levels
•  The fridge fails to switch to energy-saving modes when the door is closed 
•  Lights not turning on or off correctly when the door is opened or closed

Replace yours today with this genuine OEM LG part to ensure consistent and reliable temperature control. This OEM LG part is also compatible with Sears/Kenmore.

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The Fan Guide Assembly is an OEM component specifically designed for LG refrigerators equipped with rear evaporator fans. This assembly guides proper airflow within the refrigerator compartment.

Symptoms of a bad fan guide assembly include:

• Development of warm or cool spots inside fridge surfaces  
• Excessive frost or moisture buildup at specific locations
• Reduced temperature fluctuation stability 
• Abnormally loud fan operation sounds

Causes of failure can be damage allowing fan blade strikes, cracks reducing structural integrity over time, or accumulation of dust clogging air passages.  

Replace yours today with this genuine OEM LG assembly to maintain optimized cooling throughout storage areas. Smooth, balanced airflow preserves food freshness evenly. This replacement part is compatible with Frigidaire, GE, and Samsung models for factory fit and function. Proper air distribution helps maintain energy efficiency.

Replacement lamp cover that protects and diffuses an appliance's interior light, restoring even illumination and shielding the bulb from spills and contact. Restores proper light output and appearance after a cracked or missing lens. What it does:

• Protects the interior light bulb from food splatter, grease, and accidental contact.
• Diffuses and evens interior illumination to reduce hot spots and glare.
• Replaces cracked, yellowed, or missing lenses that can cause dim, flickering, or exposed-bulb issues.
• Matches the original lamp housing shape and secures with the appliance's existing clips or screws.

• Always disconnect power (unplug appliance or switch off circuit) and allow the bulb to cool before beginning.
• Remove any retaining screws or clips carefully; handle the cover gently to avoid cracking.
• Seat the cover securely in the lamp housing and reinstall original hardware—do not overtighten screws.
• After installation, restore power and verify the light operates and the cover is properly seated.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.

This door switch cover houses and protects the refrigerator/freezer door switch, keeping the switch secure and aligned so the interior light and door-sensing functions work reliably. It's a direct-fit replacement for damaged or cracked covers. What it does:

• Protects the door switch from impacts, spills, and debris that can cause intermittent contacts or failure
• Keeps the switch properly positioned so the interior light turns on/off when the door opens and closes
• Helps ensure consistent door-sensing for control logic that manages defrost and cooling cycles
• Reduces the risk of moisture reaching the electrical switch components

• One door switch cover

• Power off and unplug the appliance before beginning any repair to avoid shock or damage
• Handle gently to avoid breaking the plastic tabs; some models use snap-in tabs or screws for mounting
• Verify switch alignment and operation before fully reassembling the door trim
• Replace the switch assembly as needed

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

This sub PCB assembly is an electronic control board that processes inputs and switches components, coordinating specific appliance functions. Replacing a failed board can restore normal operation and resolve dead controls, error codes, or intermittent, unpredictable behavior. What it does:

• Distributes and regulates control power and switches loads via onboard relays/triacs
• Interprets signals from sensors and the user interface to execute commands
• Coordinates timing and operation of related components per the appliance's program logic
• Failure may present as no power, won't start, unresponsive or flickering display, random beeps, or recurring error codes

• 1 sub PCB assembly

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph wiring; transfer connectors one at a time and ensure they are fully seated
• Secure the board with existing fasteners/standoffs; perform any required reset or diagnostic per your model's service info

This ice maker assembly replaces a failed refrigerator ice maker to restore automatic ice production and reliable cube harvesting. Use it to address lack of ice or irregular ice cycling so your appliance makes ice again. What it does:

• Freezes and cycles water into ice, then harvests cubes into the ice bin.
• Common replacement for no ice production, reduced output, or an ice maker that won't cycle.
• Helps isolate ice-maker failures from water-supply or valve issues when diagnosing ice problems.

• Always disconnect power and shut off the water supply before beginning service.
• Some installs require removing shelves, drawers or interior panels.
• Basic hand tools are typically all that's needed; handle electrical connectors and the fill tube carefully.
• If issues continue after replacement, verify water supply pressure and the water inlet valve.

The Ice Maker Assembly is an OEM component specifically designed for LG refrigerators. It is responsible for automatically producing batches of ice cubes through an electrical freezing process.

Causes of a bad ice maker assembly can include failures in the electrical components, freezing properties deteriorating over time, or physical damage to the assembly housing. 

Symptoms of a bad ice maker assembly include:

• No ice production or very slow icemaking  
• Cubes that are improperly formed or jammed inside the unit
• Error codes displayed related to the icemaker
• Leaking or water issues around the assembly area

This LG part is also compatible with Sears/Kenmore models utilizing the same refrigerator chassis and components.

This DC motor assembly powers the appliance's indoor fan to move air where needed. Replacing a worn motor restores proper airflow and reduces noise, helping the appliance maintain performance and temperature control. What it does:

• Spins the indoor fan/blower to circulate air through the appliance
• Restores airflow when a motor has failed or stopped running
• Reduces whining, grinding, or irregular fan noise caused by a faulty motor
• Helps resolve uneven temperatures or poor circulation tied to a bad motor

• Disconnect power to the appliance before starting any repair
• Handle wiring connectors and mounting tabs carefully; match harness connections exactly
• Inspect and secure mounting screws and blower/fan alignment during reassembly
• Test operation after installation to ensure proper airflow and sound

The Water Line Connector is an OEM replacement part for LG refrigerators. It is responsible for connecting the water supply line from the home plumbing to the refrigerator's internal water distribution system, allowing for ice and water dispenser functionality. 

Causes of a bad water line connector can include cracking, leaks, or deterioration of the connector material over time due to regular water pressure and temperature fluctuations. Connectors may also become damaged if exposed to impact.

Symptoms of a bad water line connector include:

• Leaks at the connection point between the line and refrigerator
• Loose, slipping, or disconnected water line fitting  
• Reduced water pressure or no water flow to the dispenser
• Error codes related to water flow from the refrigerator diagnostics

 This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Clip is an OEM part for LG refrigerators. This clip secures the water tube in place, preventing it from moving or becoming disconnected. It plays a crucial role in maintaining the proper flow of water to the ice maker and water dispenser.

Causes of a bad water tube clip can include physical damage, wear and tear from regular use, or brittleness due to temperature fluctuations. If the clip fails, it can result in leaks or disconnections, disrupting the water supply.

Symptoms of a bad water tube clip include:

• Water leaks inside or outside the refrigerator
• The water tube becoming loose or disconnected
• Reduced or no water flow to the ice maker or water dispenser

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Fan Grille Assembly is an OEM component specifically designed for LG refrigerators. This assembly helps facilitate airflow for proper cooling and circulation within the refrigerator compartment. 

Causes of replacement include normal wear and tear over time, accumulation of dust or debris that hinders airflow, or accidental damage.

Causes of a bad fan grille assembly include:

• Higher energy bills from the refrigerator running excessively 
• Warm/hot air detected in the refrigerator or freezer sections
• Audible fan noise or vibration  

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

This sensor PCB assembly detects and relays sensor signals to the appliance control system, restoring accurate sensor feedback and communication when the original sensor board fails or malfunctions. Designed as a direct replacement board. What it does:

• Reads sensor inputs and converts them to signals the main control board can interpret.
• Replaces a failed or intermittent sensor board that causes incorrect readings or sensor-related error codes.
• Can resolve symptoms such as unexpected sensor faults, control errors, or appliances not responding to sensor changes.
• Matches the OEM board function; verify model compatibility before ordering.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Use ESD precautions and handle the PCB by its edges to prevent static damage.
• Ensure all connectors are fully seated and the board is mounted in the original orientation.

This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.

• Stores ice and interfaces with the dispenser system to deliver cubes or crushed ice
• Resolves no or weak ice dispensing
• Corrects grinding/clicking noises or auger jamming from a damaged bin
• Addresses visible cracks, broken tabs, or a bucket that won't seat securely

• Disconnect power to the refrigerator before servicing
• Open the door and pull the old bucket straight out; depress any release tab if equipped
• Align and seat the new assembly fully so the drive coupling engages—do not force it
• Restore power and test the dispenser (cube and crush selections)

This dispenser lever is the user-operated push arm that activates a refrigerator's water or ice dispenser. It replaces a broken or worn lever so the dispenser responds correctly when pressed. What it does:

• Acts as the push actuator for the fridge water/ice dispenser
• Transfers user pressure to the dispenser switch/valve so water or ice is released
• Restores proper alignment and feel if original lever is cracked, loose, or missing
• Fits into the dispenser housing and connects to the dispenser mechanism

• One dispenser lever

• Disconnect power to the appliance before starting any repair
• Remove the dispenser bezel or front panel per your model's service instructions to access the lever
• Inspect surrounding clips and pins; replace any damaged fasteners for a secure fit

This does include the Ice maker.

The Ice Dispenser Assembly is an OEM part for LG refrigerators. It incorporates the components responsible for making and dispensing cubed ice. 

Causes of a bad dispenser can include worn gears or drive wheels that no longer advance ice consistently. Clogs or mineral buildup from hard water sediments over time also reduce effectiveness.

Symptoms of a dysfunctional dispenser assembly include:

• Ice cubes dispensing poorly or jamming within the chute
• Grinding or other unusual noises during dispensing
• Dispenser knob or lever functioning intermittently
• Inability to selectively dispense ice or water

This LG part is also compatible with some Kenmore models.

The Water Tank is an OEM part for LG refrigerators. It is responsible for storing and supplying water to the refrigerator's internal dispenser and ice maker. Made from food-grade plastic, the water tank is designed to hold water in a safe, sealed container.

Causes of a bad water tank can include cracks that develop over time, possibly from repeated fillings and drainings of the tank which lead to stress fractures. Mineral or sediment buildup may also cause issues.

Symptoms of a faulty water tank include:

• Leaks or water spillage inside the refrigerator 
• Inconsistent or disrupted water supply to the dispenser/icemaker
• Irritating noises from water sloshing around a damaged tank

This OEM LG part is also compatible with Sears/Kenmore refrigerator models. Proper installation of this replacement part will restore full water functionality.

The Connector (Mech), Tube is an OEM part for LG refrigerators. It is used to securely connect water tubing within the refrigerator, ensuring a reliable flow of water to components such as the ice maker and water dispenser.

Causes of a bad connector can include wear and tear over time, physical damage from improper installation or handling, or degradation due to exposure to varying temperatures and water pressure.

Symptoms of a bad connector include:

• Leaks or drips around the connector area
• Reduced water flow to the ice maker or water dispenser
• Water pooling inside or around the refrigerator
• The ice maker or water dispenser not functioning properly

This OEM LG part is also compatible with Sears/Kenmore models.