Inglis Axle, Roller, Pulley Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 349241T
Rear drum support roller kit for dryers. Mounts behind the drum to maintain alignment and smooth rotation. Replace when rollers are worn or damaged.
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$17.74
- Compare At:
-
$21.29
- You Save:
-
$3.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W10837240
Complete idler pulley assembly with bracket, roller, and hardware. Replaces worn, squeaking, or damaged pulley components. Maintains belt tension.
Do-It-Yourself Stories from Customers like You
The idler pulley was squeaking Bob C. • Fall River , MA • June 12, 2014
I bought the new arm assembly because after a few times of going in through the front of the machine and reaching in the back under the drum I could get to the pulley, so I took it off of the arm and lubed it and then replaced it back inside, put the belt back on and it was good for a week or so , then started squeaking again. So after doing this about 6 times I got the impression that is was the wheel and shaft on the arm were worn out causing the wheel to wobble and wear the arm.
I then...
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691366
Idler pulley maintains belt tension in your dryer drum assembly. Replace if the wheel is cracked, bracket is broken, or pulley has worn bearings.
This part fixes the following symptoms
-
Will not tumble
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$15.65
- Compare At:
-
$18.78
- You Save:
-
$3.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10314173
Replacement drum support roller for dryers. Mounts on the drum frame to support and guide the drum as it rotates. Replace if cracked, worn, or damaged.
Do-It-Yourself Stories from Customers like You
The dryer drum would barely turn. James R. • Minden , NV • December 09, 2022
I watched videos on the disassembly of my dryer model, and got the model number hiding on the upper dryer door jamb. After calling AppliancePartsPros.com for help, then ordered parts with the help of APP. It took almost a full day to disassemble the dryer I have, as it is a little more complicated than some models, and I went very slowly on purpose to not lose screws, or break plastic parts.
Getting the wiring harness apart was the hardest thing to do, as the screwdriver shown in the video...
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: 279640
Replacement idler pulley for dryer drum belt systems. Maintains proper belt tension. Replace if pulley is cracked, worn, or bearings are damaged.
Do-It-Yourself Stories from Customers like You
I had no error code, it is just that when you press start you would hear a click and no actions. Nicholas M. • Miami , FL • June 12, 2020
It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was...
Read more
More
$25.95
- Compare At:
-
$31.14
- You Save:
-
$5.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066184
Connects the dryer motor shaft to the drum belt. Replace if cracked, broken, or worn. Includes mounting hardware for secure motor-to-belt connection.
Do-It-Yourself Stories from Customers like You
Broken motor pulley Michele D. • Jefferson , MA • December 11, 2015
Replaced pulley and belt.
Read more
More
$38.95
- Compare At:
-
$45.96
- You Save:
-
$7.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359270
Left-side shaft that supports the drum roller assembly in your dryer. Replace if worn, bent, or damaged to restore proper drum rotation and alignment.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359272
Replacement drum support shaft with left-hand threading for dryer roller assembly. Needed when original shaft is worn, scored, or damaged during roller repair.
Do-It-Yourself Stories from Customers like You
Very loud and squeaky Michael M. • Chesapeake , VA • April 09, 2018
Replaced the Rollers, Pins, belt and belt tensioner. One thing to keep in mind. In the video it was said that the back and front roller pins were different by lengths. They were the same length for my model. The differences were found to be the rear pins have left handed threads and the front ones were standard right hand threads. Keep that in-mind when you are trying to remove them.
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359269
Right-side shaft for dryer drum support roller. Replace if worn, bent, scored, or damaged to restore proper drum rotation. Installs on right side of cabinet.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359271
Shaft that secures front drum support rollers in your dryer. Replace if worn, scored, or damaged to restore proper drum alignment and support.
Do-It-Yourself Stories from Customers like You
Very loud and squeaky Michael M. • Chesapeake , VA • April 09, 2018
Replaced the Rollers, Pins, belt and belt tensioner. One thing to keep in mind. In the video it was said that the back and front roller pins were different by lengths. They were the same length for my model. The differences were found to be the rear pins have left handed threads and the front ones were standard right hand threads. Keep that in-mind when you are trying to remove them.
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19