Parts for Lg LMV1925SB: Installation Parts

Mounting screw for ovens, ranges, and microwaves. Secures panels, brackets, and internal components. Replace if stripped, missing, or damaged.

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

Replacement mounting screw for microwave panels and components. Secures brackets, vents, and assemblies. Needed when original fastener is missing or damaged.

Replaces cracked, broken, or warped outer door frame on your microwave. Secures door glass and maintains proper alignment. Restores appearance.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

Connects the turntable motor to the glass tray hub so it rotates during cooking. Replace this shaft coupler if it's cracked, worn, melted, or broken.

The holder is an OEM part for LG microwaves. It provides support and stability to the microwave's shelf or rack, allowing you to safely place and heat your food. It ensures that the shelf remains securely in place during operation, preventing any accidents or damage.

A bad shelf holder can occur due to wear and tear over time, accidental mishandling, or damage from excessive weight or impact. If the support becomes loose, cracked, or broken, it can compromise the stability of the microwave shelf, making it unsafe to use.

Symptoms of a bad holder include:

• Unstable or wobbly microwave shelf.
• Inability to properly secure the shelf in place.
• Noticeable cracks or damage to the support.
• Difficulty in placing or removing items from the shelf.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Color: metallic. Measures about 15 inches wide by 8 inches deep.

This is an AC synchronous motor that drives the turntable glass tray inside the microwave. It rotates the tray slowly during cooking to ensure food heats evenly. Replace this motor if the turntable has stopped spinning, turns intermittently, or makes a buzzing or humming noise without rotating.

Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.

This holder secures the door lock assembly to the washer, keeping the latch and lock mechanism aligned for reliable door closure and operation. Replaces a worn or broken lock mounting bracket to restore proper door engagement. What it does:

• Mounts and supports the washer door lock assembly to keep the latch aligned
• Holds the lock in place so the door can fully close and lock during cycles
• Common symptoms: door won't latch, door comes loose, washer won't start, or door/lock error codes
• Prevents excessive movement that can damage the lock or striker

• Unplug the appliance and turn off water supply before beginning work
• Basic hand tools (screwdriver, nut driver) are typically required; keep fasteners for reassembly
• Handle edges and the door/lock assembly carefully to avoid damage

This replacement lever provides the control handle used to operate the appliance's door or dispenser, restoring solid, intuitive control and appearance. Ideal when the original handle is cracked, loose, or missing. What it does:

• Replaces a worn or broken control lever so controls move smoothly
• Restores proper engagement for opening/closing or dispensing actions
• Helps stop wobbling, slipping, or intermittent operation caused by damaged lever
• Keeps the appliance looking and functioning like new

• One replacement lever

• Basic hand tools usually required; disconnect power before servicing
• Follow OEM service manual for safe removal and installation
• If the lever fastens with clips or screws, inspect for broken retainers and replace as needed

Holder component for microwave interiors. Replaces broken, cracked, or missing holders that secure internal parts. Direct fit for multiple models.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

Fix a microwave that won't ventilate or has poor air circulation with this circulation fan motor. Moderate DIY repair restores proper airflow.

Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.

This is an installation hardware kit that includes the bolts, screws, brackets, and fasteners needed to mount an over-the-range microwave to the wall and upper cabinet. It ensures the microwave is securely attached and properly supported during use. Use this kit if you are installing a new microwave or if original mounting hardware has been lost, stripped, or damaged.

Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.

Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.

The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.

Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.

Symptoms of a bad micro switch include:

• The microwave not starting or stopping unexpectedly
• The door not latching properly
• The microwave light not turning on or off correctly
• Error messages appearing on the control panel

This OEM LG part is also compatible with Sears/Kenmore models.

This is a micro switch that detects whether the microwave door is properly closed and latched. It is part of the safety interlock system that prevents the microwave from operating with the door open. Replace this switch if the microwave does not start when the door is shut, runs with the door open, blows a fuse when the door closes, or stops mid-cycle intermittently.