Kenmore / Sears Dishwasher Manual, Care Guide

This replacement Energy Guide label restores the factory energy-use sticker that shows estimated annual energy consumption and efficiency info. It helps keep the appliance compliant with visible labeling and gives buyers clear energy details at a glance. What it does:

• Replaces a missing, damaged, or faded Energy Guide sticker so energy info is legible
• Identifies estimated energy use and relevant efficiency messaging displayed on the appliance
• Helps maintain resale transparency and meets expected on-appliance labeling for consumers
• Useful when original label adhesive has failed or the sticker has peeled off

• Clean and dry the mounting area thoroughly before applying to ensure adhesion
• Peel backing and press firmly, smoothing out air bubbles for full contact
• Align carefully; adhesive backing is permanent and not intended for repeated repositioning
• Do not use on textured surfaces or where official labeling is required to remain tamper-evident

This replacement owners manual provides the original user instructions and safety information for your appliance so you can operate it correctly and reference troubleshooting and maintenance guidance. Keeps key setup, care, and warning details at hand. What it does

• Supplies official operating instructions and control explanations for the appliance
• Includes safety warnings and recommended maintenance to help prevent damage or injury
• Offers basic troubleshooting steps and guidance for common issues
• Lists care and cleaning recommendations to maintain performance

• One printed owners manual

• No tools required — this is documentation only; keep with the appliance for easy reference
• Read all safety and installation instructions before operating the appliance
• Store in a dry place away from heat and moisture; replace if damaged or illegible

This is a replacement energy guide label — the adhesive sticker that displays a refrigerator or freezer's estimated annual energy use and efficiency rating. Use it to restore missing or damaged labeling for accurate consumer information. What it does:

• Replaces a torn, faded, or missing energy guide sticker so appliance energy info is visible
• Restores manufacturer/retailer-required energy labeling for display or resale
• Helps owners quickly view estimated annual energy use and comparative efficiency
• Serves as a direct cosmetic and informational replacement without affecting appliance function

• One replacement energy guide label (adhesive-backed)

• Clean and dry the application area; remove any old adhesive before applying
• Peel backing and press label firmly; smooth out bubbles for a secure bond
• Apply to a flat, visible surface on the appliance where original label was located
• Non-electrical part — no tools or wiring needed; replace with appliance powered off for best access

This replacement Energy Guide label restores the factory energy-rating label so your appliance displays required efficiency info and model details clearly. It's a direct cosmetic/identification replacement for a missing, faded, or damaged label. What it does:

• Replaces a torn, faded, or missing Energy Guide sticker so energy-use info and ratings are visible
• Restores factory identification and the printed efficiency/consumption information
• Helps meet labeling requirements for resale or service identification
• Provides the original look and placement when applied in the correct location

• One adhesive Energy Guide label

• Surface must be clean, dry, and free of oils or residue before applying
• Align carefully and press firmly; smooth from center outward to avoid bubbles
• Intended as a cosmetic/identification replacement only; does not affect appliance operation
• If label area is textured or damaged, consider a smooth restoration first for proper adhesion

This replacement Energy Guide label is the adhesive sticker that displays an appliance's estimated yearly energy use and operating cost in plain, easy-to-read format. It restores a legible energy information label for appliances with missing, damaged, or faded guides. What it does:

• Shows the estimated yearly energy consumption and cost information found on the original Energy Guide label
• Replaces torn, worn, or illegible labels so energy info is visible again
• Helps consumers compare energy use when evaluating or reselling an appliance
• Fits where the original factory label was mounted — typically on the interior or exterior cabinet

• One (1) adhesive Energy Guide label

• Surface-mount sticker: clean and dry the application area before installing for best adhesion
• Peel the backing and press firmly to apply; smooth out any bubbles
• Avoid installing on wet or heavily textured surfaces; not reusable once removed
• Dispose of the old label properly; no special tools required

This energy guide label is the factory replacement sticker that displays verified energy consumption and efficiency information for a refrigerator. It restores the visible energy-rating label so users can quickly confirm estimated energy use. What it does

• Shows the appliance's official energy consumption and estimated yearly operating cost.
• Restores a missing or damaged energy rating label for resale, service, or regulatory compliance.
• Helps owners verify efficiency details without opening the appliance.
• Peels and sticks to a clean, flat exterior surface for long-lasting placement.

• Clean and dry the mounting area thoroughly before applying.
• Peel backing and press label firmly, smoothing out air pockets.
• Align label carefully; adhesive is permanent and may not re-adhere once removed.
• Follow any local disclosure or placement requirements when replacing the label.

This replacement Energy Guide label restores the appliance's factory energy-use info and on-appliance rating sticker so usage and efficiency details are readable. It's a simple adhesive label made to match the original factory marking. What it does

• Displays the appliance's energy-consumption information and rating details in the original on-unit location.
• Replaces faded, torn, or missing energy guide stickers so required energy information is visible.
• Helps technicians and owners verify appliance energy-use data during service or resale.
• Keeps the appliance looking complete with a manufacturer-style label.

• One adhesive Energy Guide label (single sticker only).

• Clean and dry the mounting surface before applying to ensure adhesive bonds properly.
• Peel the backing and align carefully; apply firm pressure to remove air bubbles.
• Do not stretch or fold the label; replace only if the original label location is intact and flat.

This replacement Energy Guide label is the adhesive sticker that displays an appliance's official energy use and efficiency information. It restores missing or unreadable labeling so buyers and service techs can see the appliance's energy guidance. What it does

• Replaces a torn, faded or missing Energy Guide sticker so the appliance shows its official energy-use information.
• Restores readable energy and efficiency details typically found on refrigerators and similar appliances.
• Helps clarify operating cost and efficiency ratings for resale, service, or inspection.
• Cosmetic replacement only—does not affect appliance operation or performance.

• One Energy Guide label (adhesive sticker)

• Clean and dry the installation area; remove old adhesive residues before applying.
• Peel and stick the label in the original location; align carefully—adhesive is permanent once applied.
• No tools or electrical disconnection required for label replacement; handle gently to avoid creasing.
• Replace only with the correct OEM label for accurate energy information.

This Energy Guide label is the official adhesive sticker that displays a refrigerator's estimated energy use and efficiency info. It replaces a damaged or missing energy rating label so you can keep appliance labeling accurate. What it does:

• Shows the appliance's estimated yearly energy use and efficiency information
• Restores required consumer-facing energy labeling for resale or inspection
• Helps clarify energy-cost expectations when evaluating appliance performance
• Replaces a torn, faded, or missing factory sticker on the cabinet or inner panel

• Clean and dry the mounting surface before applying to ensure good adhesion
• Peel protective backing and press firmly, smoothing out any air bubbles
• Apply to a flat, accessible area where label is visible and not subject to frequent wear
• If replacing a damaged label, remove residue with an appropriate adhesive remover and follow manufacturer surface prep recommendations

This is an adhesive Energy Guide label that mounts on the appliance exterior to show the manufacturer's estimated energy use and rating. Replaces a missing, torn, or unreadable energy guide so ratings are clearly visible. What it does:

• Displays the appliance's estimated energy consumption and efficiency information.
• Restores required labeling if the original guide is damaged or removed.
• Helps homeowners verify energy rating details at a glance.
• Common symptom: label is missing, badly faded, or illegible.

• Surface must be clean, dry, and free of oils or residue before applying.
• Peel-and-stick installation; align carefully—adhesive is permanent and difficult to reposition.
• No tools required; follow the original label location and orientation for compliance.