Kenmore / Sears Dishwasher Gasket & Seal

The Dishwasher Tub Gasket is an OEM replacement part for Frigidaire dishwashers. It seals the gap between the dishwasher tub and the door, preventing water leaks and ensuring efficient operation. This tub gasket is typically made of durable rubber or silicone material, designed to withstand the heat, moisture, and chemicals involved in the dishwashing process

Symptoms of a faulty Dishwasher Tub Gasket include:

• Water leaks around the dishwasher door or base
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues outside the tub area
• Visible cracks, wear, or damage to the gasket material

Causes of a bad tub gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Bottom Gasket is an OEM replacement part for Frigidaire dishwashers. It is a critical component that seals the gap between the bottom of the dishwasher tub and the door, preventing water leaks and ensuring efficient operation.

Causes of a bad bottom gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.  

Symptoms of a faulty Bottom Gasket include:

• Water leaks around the base of the dishwasher
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues under the dishwasher
• Visible cracks, wear, or damage to the gasket material

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles.  This seal measures approximately 22 inches in length

Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.

Symptoms of a worn lower door seal include:

• Water leaking out from beneath dishwasher door during cycles
• Difficulty latching door completely from warped seal edges  
• Visible cracks, splits or brittleness along the length of the seal
• Gaps allowing water intrusion beneath door perimeter

This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.

The Lower Door Seal is an OEM replacement part for Whirlpool refrigerators. It plays a crucial role in maintaining the proper seal between the refrigerator door and the cabinet, ensuring energy efficiency and consistent temperature control.

Causes of needing to replace the lower door seal can include normal wear and tear over time, exposure to extreme temperatures or UV light, or physical damage due to impact or mishandling.

Symptoms of a faulty lower door seal include:

• Difficulty in closing the refrigerator door properly
• Visible gaps or gaps around the door seal area
• Condensation buildup or frost formation around the door seal
• Increased energy consumption due to inefficient sealing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Dishwasher Door Bottom Gasket is an OEM part for Frigidaire dishwashers. This gasket is installed along the bottom of the dishwasher door, ensuring a tight seal to prevent water from leaking out during operation.

Causes of a bad Dishwasher Door Bottom Gasket can include natural degradation over time, exposure to harsh cleaning chemicals that can erode the material, or improper installation leading to uneven wear or tearing.

Symptoms of a bad gasket include:

• Water leaking from the bottom of the door
• Visible wear or damage to the gasket
• Problems with the dishwasher cycle due to water escaping

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement sealing gasket restores a tight, leak-resistant barrier between mating components in your appliance. Replacing a worn seal helps prevent leaks and moisture escape to keep performance stable and reliable.

• Maintains a watertight/airtight seal between connected parts
• Helps resolve leaks, drips, and moisture pooling inside or beneath the unit
• Addresses issues caused by flattened, cracked, or hardened seals
• Supports proper operation by preserving pressure and flow at the joint

• Disconnect power and, if applicable, shut off water before servicing
• Remove the related cover/assembly to access the old seal; note its orientation
• Clean the groove/mating surfaces; install the new seal evenly without stretching
• Reassemble and run a short test to check for leaks

The Gasket and Strike Kit is an OEM part for Whirlpool dishwashers, designed to ensure a tight and leak-proof seal around the dishwasher door. This kit includes a door gasket and a door strike, both crucial components in preventing water from leaking out during the wash cycle. 

Causes of a bad Gasket and Strike Kit can include normal wear and tear from regular use, leading to a loss of elasticity in the gasket.

Symptoms of a bad Gasket and Strike Kit include:

• Water leaking from around the dishwasher door.
• Difficulty closing the dishwasher door or ensuring it stays latched during operation.
• Visible signs of wear, such as cracks or hardening on the gasket, or bending or damage to the strike.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.

Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes. 

Symptoms of a bad Tub Corner Baffle include:

• Visible signs of wear or damage
• Water leakage from the corners of the dishwasher door
• Unusual noises during operation

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation.  For the left side use WD8X228. Color: Black.

Symptoms of a bad Tub Corner Baffle include:

• Water leaking from the corners of the dishwasher door.
• Pools of water forming near the dishwasher after operation.
• Decreased cleaning performance due to water escaping the wash cycle area.

Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This splash shield kit is an OEM replacement part that prevents water from spraying beyond the door seal in Frigidaire dishwashers. The kit measures 1.5 inches in length, 0.5 inches in width, and 1.7 inches in height.  This kit is located on the front lower corners of the dishwasher tub. If your dishwasher is leaking due to a damaged or worn-out splash shield, the kit provides a reliable replacement.

Symptoms of a bad splash shield kit include:

• Stains or mineral deposits on surrounding cabinetry   
• Puddles or drips developing outside the dishwasher tub 
• Reduced cleaning ability due to unredirected spray patterns
• Damage, cracks or missing sections of splash shielding 

Causes can be normal wear from extended use breaking down barriers over time. Proper shield alignment is needed to effectively direct spray inside the tub.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Door Gasket Insert is an OEM part for GE dishwashers, specially designed to create a watertight seal along the dishwasher door's perimeter. This insert is crucial for preventing water from leaking out of the dishwasher during operation. It fits snugly into the door's groove, ensuring that the door closes securely and no water can escape during the washing and rinsing cycles.

Causes for a Door Gasket Insert to fail include regular wear and tear from daily use, exposure to harsh detergents and high temperatures, and physical damage from loading and unloading dishes.

Symptoms of a bad Door Gasket Insert include:

• Water leaking from around the dishwasher door.
• The dishwasher door feels loose or doesn't close as tightly as before.
• Visible signs of wear, such as cracks, brittleness, or deformation in the gasket.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Dishwasher Door Gasket is an OEM part for GE dishwashers. It forms a seal around the dishwasher door to prevent water from leaking during the wash cycle. The gasket has an approximate length of 89 inches.

Causes of a bad door gasket can include wear and tear over time, improper cleaning or maintenance, or damage from sharp objects or harsh chemicals. These issues can cause the gasket to become brittle, cracked, or misshapen, compromising its sealing capability.

Symptoms of a bad door gasket include:

• Water leaking from the bottom of the dishwasher door
• Visible cracks or tears in the gasket
• The dishwasher door not closing properly
• Excess moisture around the dishwasher area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For the short 4" piece of gasket in the bottom middle, also order WD08X10015.

The Lower Door Seal is an OEM part for Bosch dishwashers. It plays a crucial role in preventing water from leaking out of the dishwasher door during cycles. This seal is positioned along the bottom of the door, ensuring a tight and secure closure that keeps water contained within the unit.

Causes of a bad Lower Door Seal may stem from various factors. These include natural wear and tear due to extended use, chemical degradation caused by harsh detergents, physical damage like tears or cuts, as well as improper installation or alignment.

Symptoms of a bad Lower Door Seal include:

• Water leaking from the bottom of the dishwasher door
• Visible signs of wear or damage on the seal
• Mold or mildew buildup on the seal due to constant moisture exposure

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Door Gasket is an OEM part for Whirlpool dishwashers. This gasket is designed to create a watertight seal around the dishwasher door, preventing water from leaking out during wash cycles. It ensures that the dishwasher operates efficiently by keeping water inside the unit, maintaining optimal cleaning performance, and protecting your kitchen from water damage.

Causes of a bad door gasket can include regular wear and tear from frequent use, exposure to high temperatures and harsh detergents, or damage from debris and foreign objects. Over time, these factors can lead to the gasket becoming brittle, cracked, or deformed, compromising its sealing ability.

Symptoms of a bad door gasket include:

• Water leaking from the dishwasher door during or after a cycle
• Visible cracks, tears, or deformities in the gasket
• The dishwasher door not closing properly or requiring extra force to close
• Mold or mildew buildup on the gasket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Cabinet Seal is an OEM part for Whirlpool dishwashers. This seal is crucial for preventing water leaks by creating a watertight barrier between the dishwasher tub and the door. It ensures that water stays inside the dishwasher during the wash cycle, maintaining the appliance's efficiency and protecting your kitchen from water damage.

You should replace this cabinet seal if it becomes damaged, worn out, or loses its elasticity. Causes of a bad cabinet seal can include regular wear and tear, exposure to high temperatures, or buildup of detergent and mineral deposits, which can degrade the seal material over time.

Symptoms of a bad cabinet seal include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks or tears in the seal
• Increased moisture or puddles around the dishwasher
• A loose or improperly seated seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Shaft Seal is an OEM part for GE dishwashers. This seal is located around the motor shaft and prevents water from leaking out of the dishwasher tub where the motor shaft enters.Seal for pump drain valve shaft. Instruction sheet included. Push-on nut may have to be cut off, order WR2X7054.

Over time, regular use can cause the seal to deteriorate, or debris and mineral deposits can lead to damage. A compromised shaft seal can result in water leaks, potentially causing damage to your kitchen floor and dishwasher components.

Symptoms of a bad dishwasher shaft seal include:

• Water leaking from the bottom of the dishwasher
• Puddles or water damage around the dishwasher area
• Unusual noises coming from the motor area due to water infiltration
• Visible wear or cracks on the seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.