Kenmore / Sears Freezer Parts

The Door Gasket is an essential OEM component for Frigidaire top-freezer refrigerators. It establishes an insulating air seal around the perimeter of the refrigerator and freezer doors.

Causes of failure include breakdown of sealing materials from prolonged compression during repeated closure stresses. Damage like cracks or tears diminish gasket capabilities over time.

Symptoms of a faulty door gasket include: 

• Cool air leakage resulting in warmer interior temperatures
• Frost or condensation buildup visible around door frames
• Physical deterioration like tearing or perishing gasket materials

This OEM Frigidaire replacement gasket is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

Replacement frame shelf that secures and supports a refrigerator shelf, restoring stable storage and helping prevent sliding or tipping of items. Fits the OEM shelf opening and provides a finished trim around the shelf edge. What it does:

• Holds and supports a glass or plastic shelf so food and containers sit level and secure
• Keeps shelf edges aligned with the refrigerator liner to prevent tipping or shifting
• Restores proper shelf seating when the original frame is cracked, warped, or broken
• Helps maintain an even load distribution across the shelf surface

• 1 frame shelf

• Remove all items from the shelf and use caution handling glass components
• Many installs slide or snap the frame into place after removing the shelf; keep track of any clips or fasteners
• If the shelf or frame is damaged, replace both pieces when recommended by the OEM

This door gasket is a replacement refrigerator door seal that helps maintain an airtight closure to keep cold air in and reduce temperature fluctuations. Restores proper sealing to help the fridge run efficiently and protect food. What it does:

• Seals the refrigerator door to prevent warm air from entering and cold air from escaping
• Helps reduce frost buildup and uneven cooling caused by a failing seal
• Can lower strain on the compressor by improving temperature stability
• Addresses symptoms such as visible gaps, drafts, or moisture buildup around the door

• Disconnect power to the appliance before starting any work
• Clean and dry the door frame surface before installing the new gasket for a tight seal
• Remove the old gasket carefully; use hand tools and avoid sharp implements that could damage the cabinet
• Follow the appliance manufacturer's installation instructions for proper fit and tab alignment

This replacement cover is an access panel trim piece that protects internal components and gives the appliance a finished appearance. It restores a secure, clean-looking exterior where the original cover is cracked or missing. What it does

• Covers and protects control or component openings from dust, debris, and accidental contact
• Keeps wiring and fasteners concealed for a neater appearance
• Prevents rattling or vibration caused by a damaged or loose trim piece
• Commonly replaced when the cover is cracked, broken, warped, or missing

• One cover

• Disconnect power to the appliance before starting any work
• Remove adjacent trim or fasteners as needed to access mounting points; retain hardware for reassembly
• Align tabs or screw holes and secure without over-tightening to avoid cracking the plastic

This replacement basket restores storage and organization inside your refrigerator or freezer, keeping foods contained and easy to access. Durable design holds frozen or chilled items and fits into the factory track system. What it does

• Replaces a cracked, broken or missing basket that no longer supports food items
• Restores proper organization and prevents items from shifting or falling
• Slides into the original tracks to provide stable storage where the previous basket sat
• Helps maximize usable space and keeps smaller items grouped and visible

• Remove food and unplug the appliance (or turn off power at the breaker) before servicing.
• Slide old basket out of the tracks and lift out; align new basket with tracks and slide into place.
• Do not force the basket; check mounting tabs and track alignment before applying pressure.
• Handle carefully to avoid sharp edges.

This top washer lid replaces a cracked, chipped or faded cover to restore the washer's top closure and appearance. A direct-fit cosmetic panel that helps keep clothes and water inside the tub while the machine is in use. What it does:

• Replaces a damaged or worn top lid to restore full closure and a clean appearance
• Helps prevent splashes and keeps items from falling into the washer during operation
• Restores correct alignment for the lid so the washer door closes securely
• Useful when lid is cracked, warped, or cosmetically damaged

• One white top lid

• Disconnect power and water supply before starting any repair to avoid shock or injury
• Support the lid while removing or fastening mounting hardware to prevent dropping or damage
• Reuse existing hinges and screws unless replacements are specified for your model
• If you see additional damage to hinges or latch components, inspect and replace those parts separately

This inner door panel is the interior liner that covers and protects the freezer door cavity, helping hold insulation and mounting points while keeping the interior looking finished. It restores structural support and appearance. What it does:

• Replaces a cracked, dented, or warped inner door liner that lets insulation shift or shows visible damage.
• Provides the mounting surface for door components and helps keep insulation in place.
• Restores a sealed, even interior surface to reduce air leaks and reduce frost buildup when the outer door is intact.
• Improves door appearance by covering internal hardware and insulation.

• Disconnect power to the appliance before beginning any door work.
• Remove the freezer door per the manufacturer's instructions to access inner fasteners; keep track of screws and trim.
• Align panel clips and screw holes carefully; do not force or overtighten fasteners to avoid cracking the new panel.
• If seals or insulation were disturbed, ensure they seat correctly before returning the door to service.

This bi-metal defrost thermostat senses evaporator temperature and stops the defrost heater when the coil reaches the correct temperature, helping prevent overheating and ensuring proper defrost cycles. Fits refrigerators that use a bi-metal style defrost control. What it does:

• Opens/closes electrical circuit to the defrost heater based on coil temperature
• Stops the heater when the evaporator gets warm to prevent over-defrosting
• Can help resolve excessive frost build-up or failed defrost cycles when faulty
• Works as part of the defrost system to protect compressor and cooling performance

• One bi-metal defrost thermostat

• Disconnect power to the appliance before servicing to avoid shock
• Replace with the exact style and rating; handle terminals and wiring gently
• Mount at the same location and orientation as the original sensor; secure per OEM instructions

Water inlet tube routes incoming water from the refrigerator's supply line to the dispenser and ice maker, restoring proper water flow and helping stop leaks when a cracked or damaged inlet tube is the problem. What it does:

• Directs incoming water to the ice maker and dispenser; a damaged tube can cause weak or no water flow and reduced ice production.
• Cracks, splits, kinks or loose connections commonly produce visible leaks under or behind the refrigerator.
• Replacing the inlet tube restores reliable water delivery and helps prevent continued water damage from a compromised line.
• Inspect nearby fittings and clamps during replacement — loose or corroded fittings are a common related cause of leaks.

• Turn off the water supply and disconnect power before starting — uncontrolled water or live electrical parts create safety hazards.
• Relieve residual water pressure and catch any drips; have towels or a shallow pan ready.
• Replace any damaged clamps, seals, or fittings and tighten connections to factory torque; inspect surrounding tubing for additional damage.

This is a replacement cabinet corner trim piece designed to restore the finished edge and appearance of your refrigerator cabinet. It covers and protects the cabinet corner where trim has cracked, broken, or gone missing. What it does

• Replaces a damaged or missing corner trim to restore a clean, finished look
• Covers exposed cabinet edges to help prevent snagging or minor moisture intrusion
• Helps keep adjacent trim and panels aligned and seated correctly
• Commonly used when trim is cracked, chipped, loose, or cosmetic finish is worn

• One cabinet corner trim piece (single)

• High-level replacement: usually snaps or presses into place; remove adjacent trim or panels if needed for access
• Use basic hand tools as required; avoid excessive force to prevent damage to surrounding panels
• If working near electrical components or lights, unplug the appliance before beginning work
• Wear gloves to protect hands from sharp edges and to improve grip during removal/installation

This wire storage basket provides a durable place to hold food and accessories inside your appliance, restoring organized storage and easy access. It replaces a missing, bent or damaged basket to keep items contained and visible. What it does:

• Holds and organizes items in a freezer or refrigerator compartment
• Keeps loose items from shifting or falling through vents and shelves
• Restores easy access to frequently used foods or accessories
• Replaces bent, rusted or broken baskets that impede storage

• Use gloves to avoid sharp wire edges during removal and installation
• Remove shelves or drawers as needed for access before installing the basket
• Slide or snap the basket into the existing support rails or ledges; do not force

This drain tube insulation cushions and thermally protects the refrigerator's defrost drain tube to help prevent condensation and ice buildup. It keeps the drain line insulated so water flows freely to the drip pan and reduces drip/ice-related issues. What it does:

• Wraps around the defrost drain tube to limit heat transfer and condensation.
• Helps prevent drain freeze-ups that can cause water pooling or slow drainage.
• Reduces the chance of water dripping inside the cabinet or onto the floor.
• Supports reliable defrost water routing to the drain pan.

• Always unplug the appliance or disconnect power before servicing.
• Access may require removing the back or inside panel; keep track of fasteners.
• Slide the insulation over the drain tube so it fully covers the exposed section; ensure it sits flat without kinks.
• If corrosion or heavy buildup is present, clean the drain tube before installing new insulation.