Kitchenaid Cooktop Knob, Dial & Button

This is a knob bezel that is used on a variety of ranges, stoves, and ovens. The knob bezel sits behind the burner knobs. It acts as a base for the knob assembly. Regular use can cause damage to the knob bezel. It can also break and be lost. When this occurs, the knob bezel will need to be replaced.Replacing the knob bezel is simple and takes only a short amount of time. No tools are required for the process but a pair of work gloves can be useful. First, makes sure the stove or range is powered off and none of the burners are hot. Located the knob with the damaged or missing bezel and pull on it to bring it out of the stove. The knob bezel can be removed by hand. Install the new bezel and replace the knob.The knob bezel is a genuine OEM part and is sold as an individual product. It is made to be used with ranges, ovens, and stoves manufactured by Whirlpool and KitchenAid.

This control knob fits the surface burner valve stem on select gas cooktops/ranges, letting you turn the burner on and adjust flame level. Replacing a damaged or missing knob restores precise, reliable burner control and a clean look.

• Rotates the surface burner valve to ignite and modulate flame
• Common signs it's needed: knob is cracked, stripped, loose, hard to turn, or missing
• Ensures accurate burner selection and flame adjustment

• Allow the appliance to cool and verify all burners are in the OFF position
• Pull the old knob straight off the valve stem; do not twist forcefully
• Align the new knob with the stem and press straight on until fully seated
• Test each position (Off/Light/Adjust) for smooth operation before use

This is the black control knob that mounts on your range or cooktop's control shaft, letting you select heat levels and settings with a clear, factory look. Replacing a worn knob restores proper grip and accurate pointer alignment.

• Mounts on the control shaft to select burner or function settings
• Restores smooth turning and positive indexing
• Ideal replacement for cracked, stripped, loose, or missing knobs
• Helps ensure settings are clearly indicated and easy to adjust

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the new knob with the shaft and press firmly until fully seated
• After installation, verify smooth operation and correct pointer alignment

The Range Burner Knob is an OEM replacement part for Whirlpool electric ranges. Due to regular use, high temperatures, or accidental impact, the knob can degrade over time, resulting in issues like slipping, cracking, or improper alignment with the infinite switch.

Color: Stainless

Symptoms of a faulty Range Burner Knob include:

• Difficulty in adjusting burner settings
• Slippage or looseness when turning the knob
• Cracks, breaks, or a missing knob

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bezel and Knob is an OEM replacement compatible with Whirlpool cooktops. The control display cover at the front of the cooktop protects digital interfaces while adding a polished aesthetic. 

The bezel frames knob assemblies that enable precise temperature and setting adjustments during cooking. Causes for replacement include cracked or faded plastic from extended use over high heat sources.  

Symptoms of a failing bezel and knob include:

• Unsightly appearance damage detracting from the resale value
• The potential of food debris or liquid underneath if integrity is compromised

This OEM replacement part is compatible with select KitchenAid and Jenn-Air as well.

Color: White. Other colors: For black use WP9750372FF, for biscuit use WP9750372FC.

This flush-style control knob fits onto the appliance's control shaft to select settings with a smooth, secure turn. Replace worn or missing knobs to restore reliable adjustment and a clean, factory look. What it does:

• Attaches to the control shaft to operate the underlying switch or valve
• Provides a secure grip for selecting and adjusting settings
• Restores control when the original knob is cracked, stripped, or missing
• Typical symptoms include a knob that spins freely, falls off, won't turn the control, or is visibly damaged

• 1 control knob

• Disconnect power (and shut off gas supply if applicable) before servicing
• Pull the old knob straight off the shaft—do not pry from the sides
• Align the new knob's opening with the control shaft and press straight on until fully seated
• Restore power and test for smooth, proper operation

This replacement control knob restores a worn, cracked or missing stove/dryer control interface so you can easily select heat and cycle settings. Durable plastic construction and simple push-on fit make it a quick fix. What it does:

• Replaces a damaged or missing control knob so the appliance dial turns smoothly
• Provides a clear grip for selecting temperature, cycle or timer settings
• Stops slipping, cracking or broken pointer issues that prevent proper selection
• Fits the original control shaft to restore normal user control

• One control knob

• Disconnect power to the appliance before servicing electrical or heating controls
• Pull the old knob straight off the control shaft; press the new knob firmly into place
• If the knob resists or the shaft is damaged, inspect the control shaft and replace any worn components
• No calibration required after installation; test operation at low power first

This control knob replaces a worn, cracked, or missing push-on knob so you can turn and set appliance controls easily. It restores a secure grip and clear control feel for smooth operation. What it does:

• Fits onto the control shaft to allow manual selection of cycles, temperatures, or settings
• Restores a solid grip when the original knob is stripped, cracked, or loose
• Provides precise rotation and tactile feedback for accurate setting changes
• Helps prevent accidental setting changes by providing a secure fit

• Disconnect power to the appliance before servicing.
• This knob installs by pushing onto the splined control shaft; pull straight off to remove.
• Do not force; align splines before seating to avoid damage.
• If knob will not seat or the shaft is damaged, inspect/replace the control shaft or console components.

Color: Biscuit. Other colors: For black use WP9750372FF, for white use WP9750372FW.

This replacement control knob restores a range or cooktop's user control, making it easy to set or change heat and function settings. Simple to install, it refreshes worn or broken knobs so you can operate controls safely and accurately. What it does

• Provides a firm, easy-to-grip control for adjusting temperature and function settings
• Replaces cracked, stripped, or missing knobs that slip or won't turn
• Restores clear pointer alignment so settings register correctly
• Helps prevent accidental changes by fitting securely on the control shaft

• Disconnect power to the appliance before servicing for safety
• Pull the old knob straight off the control shaft; some models may require loosening a set screw
• Align the new knob's splines or hub with the control shaft and press firmly until seated
• Test control operation after installation; stop if it resists or binds

This knob is an OEM part for Whirlpool ranges, designed to ensure a perfect fit and seamless operation within your appliance.

A faulty range knob can often result from wear and tear over time. Continuous usage may lead to the knob becoming loose or brittle, affecting its ability to effectively control the burner or set the desired temperature. Additionally, exposure to heat or spills can cause damage to the knob's internal components, impacting its functionality.

Symptoms of a malfunctioning range knob may include:

• Difficulty in turning or adjusting the knob
• Loose or wobbly knob on the range control panel
• Inaccurate temperature settings or inability to control the burner's flame intensity

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Knob is an OEM part for Whirlpool ranges. This knob allows for precise adjustment and selection of temperature settings on the range. Its ergonomic design makes navigation simple and intuitive, enabling convenient access to all functions directly from the control panel. 

Causes of a bad knob can include cracks or chips forming from overtightening, continual exposure to heat, or impact from food packages or cookware. 

Symptoms of a bad knob include: 

• Failure to lock temperature settings 
• Unexpected changes in cooking temperature
• Knob positions not correlating to actual burner/oven settings

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement control knob restores safe, reliable finger control for an appliance's front panel. It provides a secure grip to select settings and replaces worn, cracked, or missing knobs so controls operate smoothly. What it does

• Fits onto the control shaft so you can turn and select oven, range or appliance settings.
• Replaces knobs that are cracked, loose, hard to turn, or missing.
• Restores clear indicator alignment for accurate setting selection.
• Helps prevent accidental slips and improves grip when adjusting controls.

• Disconnect power to the appliance before servicing; follow manufacturer safety guidance.
• Typically installs by pulling the old knob straight off the shaft and pushing the replacement onto the shaft until seated.
• If the knob feels loose after installation, check the shaft adapter or insert for wear and replace as needed.

The Gas Range Knob is an OEM part for Whirlpool gas ranges. It is the control interface that allows selecting different temperature settings for each gas burner on the cooktop. 

Symptoms of a bad gas range knob include:

• Difficulty turning the knob to desired burner settings 
• Knob dial numbers fading or becoming illegible
• Loose or wobbly knob that cannot be set securely 
• Missing or broken knob that makes burner control impossible

Causes can be general wear and tear over time, exposure to heat warping the plastic material, or accidental damage from rough use.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas ranges.