Lawn Chief Parts

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or lost hex bolt in a variety of outdoor power equipment models. Hex bolts are a standard piece of equipment hardware named for their hexagon-shaped head. They are critical for securing together different equipment components but can easily become corroded, stripped, lost, or otherwise ineffective, requiring replacement. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hex bolt is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a screw. It is a genuine replacement part made by MTD. Typically screws are found in many different types of machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliance are loose or missing from place. Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require common household tools as well as pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a lost or defective hex bolt in outdoor power equipment. The hex bolt is named for its hexagonal shaped head and is important for properly securing together different equipment components. It should be replaced if lost, worn, stripped, corroded, or ineffective in any way. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this hex bolt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hex bolt is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This hex bolt is a genuine MTD part, sold individually. This hex bolt can be used as a replacement part in lawn mowers, edgers, log splitters, and wood chippers. The purpose of the hex bolt for these outdoor appliances is to serve as a fastening component in conjunction with a nut so that one or more components can be held together with the aid of this fastener.The hex bolt in an outdoor appliance might need to be replaced if it is lost, misplaced, or stripped. If the hex bolt is lost or misplaced, it should be replaced by this genuine OEM replacement part. If the hex bolt suffers damage in the form of scraping, denting, cracking, or eroding over time, the component should be replaced immediately.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Yard Machines, Huskee, Yard Man, and MasterCut.

This replacement part is a hex screw. It is a genuine replacement part made by MTD. Hex screws are able to hold other parts in place and secure them so that everything can operate smoothly. This part is small yet very important to the overall operation of many different machines.A new hex screw might be needed if the user notices that the current ones are damaged or missing. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. It is possible that screws become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This is a replacement screw for lawn and garden equipment that is typically used on the blades. The flat head of the screw ensures that they will sit flush once they have been installed. These screws, which have hex-socket heads, are often found on the blades of chippers and shredders. If a blade is loose, it could be a problem with the screws that are holding it in place. This could make the machine inefficient and even dangerous to operate. Therefore, if there are screws that are worn down or that are no longer doing their job, it is important to replace them. It is essential to use the appropriate screws for a repair. This is a genuine OEM sourced replacement part that comes from the manufacturer. This helps to ensure quality and compatibility. The screw is sold individually. It is compatible with a range of chippers and shredders from MTD, Troy-Bilt, Cub Cadet, Ryobi, Yard-Man, Yard Machines, and Mastercut.

This genuine replacement part is a MTD screw ab-tap sized 5/15-14 x .75 inch. This MTD screw ab-tap has a variety of applications for many types of lawn and garden equipment including lawn mowers. This screw is important to the proper functioning of the product, and has a variety of applications depending on the model of the product. This screw is used to fasten or hold parts of the equipment together. However, screws can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper or unsafe operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually.This screw ab-tap has multiple applications in a wide range of products from MTD, Cub Cadet, Yard Man, Troy-Bilt, Yard Machines, Craftsman, and more. A screwdriver is required for proper installation of this part. Please note: original part numbers 1660664, 710-1001, 910-1001, 910-1242 are now obsolete, and manufacturer has replaced the original part number with this part.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This hex nut is designed for use with select trimmers and mowers. It is a standard hardware part that may have multiple applications depending on the type of unit and model. The nut is typically used to secure engine components or housing elements to provide safe use of the machine. These nuts are durable, but they are small and can become lost during other repairs. The constant exposure to vibrations and use can also cause them to strip or become damaged over time. Either way, a replacement with this genuine hex nut will resolve the issue and get equipment back in working order. This genuine OEM hex nut is manufactured to exact standards and sourced from the manufacturer. It can be used with trimmers and mowers from RYOBI, MTD, Bolens, Troy-Bilt, Yard Machines, Huskee, Yard Man, and Cub Cadet. Check the parts diagram for exact application and location of this nut and note that it may have multiple uses on select models. This hex nut is sold individually, and additional nuts will require the purchase of multiple pieces. In order to replace this nut, a hex socket wrench and driver will be required. Always wear gloves for safety.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Nuts are a small part found in many different types of machinery and are used to connect different parts and secure things together.A new nut might be needed if the current ones are missing or damaged in any way. It is common that nuts become stripped overtime and might get stuck or fall out of place. In this case, it is recommended that the nut be replaced. Be sure to review the specific owner's manual for more information on how to replace the nuts. This part is sold as an individual piece. Be sure to purchase the correct amount as many different machines use more than one during operation. This is also a genuine OEM replacement part sourced directly from the manufacturer.

This part is a replacement wing nut knob. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current knob is broken, defective, or has become detached, this part can be used as a replacement. It is intended for use with several different types of small engine power equipment.This knob functions as a standard wing nut and has multiple different applications depending on the type and model of equipment it is intended to be used for. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this wing nut knob, the appropriate owner's manual and equipment diagrams should be referenced. This wing nut knob is suitable for use on a variety of paint sprayer, yard vacuum, tiller, and spreader models manufactured by MTD, Craftsman, and Yard Machines. It is a genuine OEM part and thus is made of high-quality, durable plastic. Part sold individually.