Lawn Chief Parts

Flat washer for lawn mowers and tractors. Spreads load from bolts and screws to prevent damage. Replace if worn, cracked, or missing hardware.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Bell washer for lawn mowers and tractors. Replaces cracked, worn, or missing washers in drive assemblies. Ensures proper spacing and load distribution.

Flange bearing for snow blower auger and drive systems. Replace if you notice wobbling, grinding noise, or rough rotation. Verify fit with your model number.

Double pulley drives deck belt rotation for blade operation. Replace if worn, cracked, or causing belt slippage. Verify fit with your model number.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

The tri-cut blade works to replace edger blades to ensure they are sharp and capable of cutting through the grass and turf properly. The blade is made from metal and can provide users with clean edging around the edges of their lawn and around flower beds. Regularly examine the edger blade regularly to ensure that it is not bent, broken, or otherwise damaged. If your current edger blade is no longer sharp and cannot be sharpened, it is time for a replacement. Without a sharp blade for the edger, it will be impossible to take care of the lawn properly. To replace the blade in your edger, the only tool required is a wrench. Replacing the blade is easy, and it should not take more than 15 minutes. This OEM part is sold individually, and it works with edgers from a range of brands, including Craftsman, Yard Machines, MTD, Troy-Bilt, Bolens, and Yard-Man.

Ball joint assembly for lawn tractor steering systems. Secures tie rod ends and drag links. Replace if cracked, worn, or damaged to restore proper steering.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

Oil draining slowly or leaking during changes? This oil drain valve ensures quick, clean oil changes on your lawn mower. Simple DIY install in minutes.

Housing bearing for lawn mowers and outdoor power equipment. Replace when you hear grinding noise or feel resistance during operation. Verify fit.

Replacement pawl plate for lawn mowers. Secures the pawl mechanism in the starter assembly. Order a new plate if yours is cracked, broken, or missing.

If your mower won't start or runs at inconsistent speeds, the throttle housing may be damaged. This part protects the throttle mechanism and controls.

Fix transmission slipping or poor engagement with this transmission pulley. Connects drive components for smooth power transfer on lawn tractors and mowers.

Pivot arm assembly that controls wheel movement on lawn mowers and chippers. Replace if the original is cracked, bent, broken, or causing alignment issues.

This replacement part is a lever assembly. This part is a genuine replacement part made by MTD. This part is able to act like a normal lever and adjust certain things within the lawnmower so that it may function properly during use. A new lever assembly might be needed if the current one is missing or damaged in any way. This can be due to normal wear and tear over time. If the lever has become stripped down, be sure to replace it as soon as possible. It is recommended to refer to the appropriate user manual before attempting to replace this part. Be sure to wear work gloves during this job as parts can cause injury. This lever assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.