Lawn Mower Gasket & Seal

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

This intake manifold allows an engine to get the air it needs in order to run properly. Any engine runs on three things - air mixed fuel, the sparks, and combustion. It is the intake manifold that delivers the air to all of the cylinders and guarantees function. This gasket is used to replace a pre-existing intake manifold gasket that has dried out or has failed to keep the intake manifold properly sealed to the engine. This may allow air leaks or uneven air pressure in the cylinders, affecting how well the engine runs. Any gasket may wear out with time and use, and replacing the a failed intake manifold gasket with this OEM part is one way to ensure that the engine is again running at optimal levels. The repair requires wrenches, socket sets, and the appropriate components for the engine in question. This is a gasket for an intake manifold on an array of lawnmowers, lawn tractors, and snowblowers made by Tecumseh, Toro, MTD, and Lawn-Boy, and others. This high-quality intake gasket ships individually and is made of composite materials.

This is a replacement carburetor gasket. The gasket plays an important role in the carburetor. It helps to ensure that there is no additional air getting into the carburetor. It also ensures no dirt or other debris makes it into the carburetor. If the gasket is not working properly or has been damaged, air and other elements that get into the carburetor could cause the engine to run rough. It could also make it more difficult to start the engine.Over time, the carburetor gasket will wear down and will need to be replaced. Gaskets will dry out and crack the longer they've been used. There is also the possibility that the gasket has not been seated properly, which would require repair. Whenever owners are servicing the carburetor, they should make it a point to replace the gaskets, even if they appear to be in serviceable condition.This gasket is an OEM replacement part sourced directly from the manufacturer. It will work for certain models of carburetors from Tecumseh and Craftsman. Each of the gaskets is sold individually.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This replacement oil seal is an authentic OEM part for a wide range of snow thrower engines. As its name suggests, this part seals oil into the engine. More specifically, though, this oil seal is used in the crankshaft and camshaft. These two parts are responsible for translating reciprocal motion, and as such, they experience a lot of jostling. To keep from rubbing and creating friction, they require a lot of oil. So that the oil does not leak, they are sealed with oil seals. After prolonged exposure to hot oil, oil seals will begin to degrade and lose their ability to tightly seal off a shaft. When this happens, oil will leak from the engine and those parts will begin to rub against each other. As more and more friction builds up, the engine will start to quickly overheat and burn oil. Since these seals are located deep inside the engine, be prepared to follow the owner's manual on how to access and reassemble the cam and crankshafts. This replacement oil seal is a high-quality part designed to match the specifications of Toro, Tecumseh, Lawn Boy, and Husqvarna appliances. It comes sourced from its original manufacturer and does not include and additional hardware.

A gasket provides a mechanical seal between two mating surfaces to prevent leakage. This carburetor gasket, in particular, is designed to deliver an airtight seal for the carburetor so that air won't seep into where it shouldn't be. This gasket is essential for the proper functioning of the carburetor and the engine. A small engine is sensitive to minor changes in airflow, and an air leak would cause misfiring, engine vibration, and overheating. Over time, a gasket may wear out and begin to crack. Use this manufacturer-sourced gasket made from high-quality material as a replacement. This part is an original OEM replacement part that works with specific models of snowblowers, generators, and small engines from Tecumseh, MTD, Simplicity, Briggs & Stratton, Cub Cadet, Craftsman, and Toro. It is sold individually.