Need Help?
Call or text
Ordered and installed new cable Read more
Ordered the right part with ya'll, ya'll shipped me 2 of the part I needed, it installed easily, & worked! Read more
This clutch cable kit is an authentic OEM replacement part for a riding lawn mower or tractor. The clutch cable connects to the idler arm located in the lower deck of a mower and allows the operator to manually engage or disengage the blades. The clutch cable runs up through the steering block and into the front display so that the operator can easily access the clutch. If a clutch cable becomes jammed or tenses up, it will be difficult to depress. If the operator tries to depress the clutch cable without realizing that it is jammed, the clutch cable will snap. The most obvious sign of a snapped clutch cable is that the clutch gives little resistance and the blade cannot be engaged. To change a clutch cable, use a socket set to remove the fuel tank and gain access to the cable. A pair of needle nose pliers is also recommended. This replacement part is compatible with Weed Eater, Husqvarna, Ryobi, and Poulan appliances and comes sourced from its original manufacturer. This part includes a clutch cable and a zip tie.
The drive control cable is a feature of self-propelled walk-behind mowers that engage the gears of the propulsion mechanism. This cable is necessary to allow users to determine when they want to engage the self-propulsion mechanism and when they either want to allow the machine to idle or they wish to push it when mowing in small, tight areas where the self-propelling mechanism is not useful. Occasionally, as with all such mechanisms, the cable may break and it will become necessary to replace the drive control cable. In order to replace the cable, first disconnect the spark plug boot and drain the gasoline, since it's necessary to raise and lower the engine. If it's necessary to place the mower on its side, remember to keep the air filter up so oil does not drain into it. Release the drive cable from the housing that it shares with the engine engagement cable. Remove the drive gear housing on the bottom and the top of the cutting deck. Use needle nose pliers to remove the drive cable. Reverse the process to attach and engage the new drive control cable. This replacement cable is a genuine OEM part, manufactured to be identical to the original cable specifications. This cable is compatible with Craftsman and Husqvarna engines.
The cable seen here is an authentic replacement that is sourced from the manufacturer. This control cable is used for lawn mowers. It will pivot to pull the belt idler pulley, which will fasten the belt and spin the mower's cutting blades. When the cable is not working properly, it could mean that the blades will not spin properly and not provide the mower with the cutting capability that it should have. The cable that comes with the mower tends to be durable, but this does not mean that it will not need to be replaced at some point. Many things could happen to the cable that would require a replacement. The spring might start to wear out, for example. The cable could become frayed or corroded, as well. Owners should always make sure they are wearing gloves when replacing this part. They will need a screwdriver and pliers to complete the repair. The cable is a genuine OEM replacement part that is sold individually. This cable will work with more than 130 models of mowers. Brands with compatible models include Craftsman, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut.
I removed the battery and unbolted the old cable and replaced it with the new one. Nothing to it! Read more
Cleaned teeth in wheels and replaced the covers that keep debris out of the wheels. Replaced the cable that controls speed of self propel. Read more
This part is a replacement zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken zone control cable in a variety of lawn mower models. The zone control cable is essential to safe use of the mower as it stops the engine should the user let go of the handle. This part will require replacing if stretched, snapped, or rendered ineffective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.
This lift cable is designed for use with many lawnmowers and snowblowers to ensure that the gears run smoothly while using the equipment. The lift cable is made of durable materials but has delicate connectors on each end which may eventually wear out. When the connectors or cables are damaged, the part will need to be replaced. This component is important since it helps control how fast the blades or other parts of the tool can operate. If the cable breaks, the tool may not start.If the lift cable has gone bad, is worn out, or is damaged, replacement is needed. There will be no need to use tools during the process, but work gloves can be helpful. The lift cable can be untwisted from the housing and removed from the tool. Take the new component and place it in the same location. Make sure to reassemble any additional parts before useThis is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The lift cable is made to fit lawnmowers and snowblowers manufactured by Craftsman, Toro, Cub Cadet, Troy-Bilt, MTD, Huskee, Montgomery Wards, and Yard-Man.