Lawn Mower Skid & Shoe

This is a replacement skid shoe for Craftsman snowblowers. Ideally, when one shoe becomes so worn that it needs to be replaced, the other shoe should be replaced as well. Replacement is not difficult and should only require about half an hour. First, take out the key and disconnect the plug wire to prevent the machine from starting during repair. Remove the carriage bolts, nuts, and washers that hold the skid shoes in place. Replace the skid shoes. Ensure that the adjustable skids shoes are elevated enough that the snow blades will not collide with the ground during use. This will prolong the life of the shave plate. This OEM part fits a variety of different snowblowers made by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man. Sold individually. The carriage bolts that hold the shoe in place may also need to be replaced and are sold separately.

This genuine MTD slide shoe leaves a sliver of snow between the snowblower and the surface in order to prevent damage to the surface it is being used on. Snowblower slide shoes can also prevent dirt, debris, gravel, and pebbles from flying out of and around the snowblower's radius of work. Slide shoes for snowblowers might suffer damage as a result of age, overuse, exposure to the elements, or direct collision or impact. If this affects the ability of the slide shoes to protect surfaces from damage when the snowblower is in use, the slide shoes should be removed and replaced before using the snowblower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This slide shoe is compatible with the following brands: MTD, Craftsman, and Troy-Bilt. Part sold individually.

This part is a replacement skid shoe. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective skid shoe in snow blowers.Skid shoes attach to the snow blower's auger housing in order to enable the equipment to slide easily across the ground. This part is subject to significant wear and tear and thus will require replacement if broken, worn, or detached. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this skid shoe, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This skid shoe can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This is a slide shoe that is implemented as a part of snowblowers made by Husqvarna. It is used to leave a small film of snow on the ground as a way to protect the sidewalk and the snowblower. The attachments are made to act as a spacer between a driveway and snowblower while using the tool. The slide shoe connects to the housing of the auger and moves on the ground for easier transport. At times, these slide shoes can become damaged or broken and will need to be replaced.If one of the slide shoes is experiencing issues, it will need a replacement. However, it's recommended that both are replaced at the same time to ensure even wear across the different components. A socket can be used to remove the old shoes from the bottom of the snowblower. The shave plate can also be removed. Replace the parts and reassemble them before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The slide shoe is sold as an individual component. It is designed to be compatible with several different snowblowers manufactured by Husqvarna.

This height skid, also called a snowblower slide shoe, attaches to the auger housing and glides along the ground. This helps to ensure that the snowblower moves across the ground evenly. The height skid will also lift the auger housing, which helps to reduce the risk of damage. The height skids contact the ground when the snowblower is in use. This means that it could suffer from many types of damage. They should be checked regularly for signs of wear or breakage, so they can be replaced. Without the height skids in place and working properly, it could put the auger housing at risk and make it more difficult to use the snowblower. This is a genuine OEM height skid. This item is sold individually. However, it is recommended to replace both of the skids at the same time to ensure that the height is even. The skid is compatible with many snowblower models from Craftsman, Murray, and Briggs & Stratton. Buyers should always consult their manuals to ensure they are buying the proper replacement parts for their snowblowers.

This replacement part is a left-hand skid plate for snowblowers. It is sometimes also called a slide shoe. Along with the scraper on the snowblower, the metal skid plate helps to prevent damage to the machine. It also allows the user to have better control when going over uneven surfaces. Although the skid plate is durable and meant to provide protection, it can still wear out eventually or even break in some circumstances. There is also the possibility of corrosion, as it is made from metal. In those cases, it is important to replace the skid plate. This is a left-handed plate, but it is advised that owners replace both the left and the right skid plates at the same time. This is an OEM replacement part specifically for use with snowblowers. It is important to remember that it is sold individually, and the right-hand skid plate will need to be purchased separately. The part is compatible with many Craftsman, Poulan, Poulan Pro, and Husqvarna machines.