Leaf Blower Gasket & Seal

This oil seal is used in a wide selection of lawn and garden equipment. It is used to prevent dust, water, dirt, and other contaminants from reaching important parts. It also helps retain lubrication so the motor can run without any issues. If the oil seals are no longer working correctly, it can allow the oil to leak out of the tool. Topping off the oil is an option, but replacing the seal will take care of the issue for good. If there is oil leaking from a pole saw or hedge trimmer, this is an indication that new oil seals may be needed. Sockets and wrenches will be needed to handle the replacement process. Drain the oil from the engine and remove the motor to get started. Take a look at the oil seals and how they are seated for replacing the seal later. A drill or a screw can be used to remove the old seal before putting the new one in. Designed for use with Echo, Little Wonder, Mantis, and Shindaiwa string trimmers, hedge trimmers, leaf blowers, tillers, edgers, and pole saws, this component is sold individually. It is a genuine OEM part that comes directly from the manufacturer.

This gasket set is a genuine Midwest Engine part, sold individually. This gasket set can be used as a replacement part in a lawn mower or a snowblower. This gasket set comes with a variety of gaskets in various shapes and sizes, perfect for fitting into many internal mechanisms within the lawn mower or snowblower.If the gaskets have been cracked, punctured, torn, dented, cracked, eroded, or warped beyond functionality, this gasket set should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This gasket set is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, Wheel Horse, Lawn Boy, and Simplicity.

This replacement part is a gasket kit and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. It fills the space between different surfaces to prevent leaks and heavy friction. This keeps the machine running properly. If gaskets are loose or damaged, friction will build up and can possibly create excess heat. It is normal for gaskets to become stripped with normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring used as a gasket in lawn and garden equipment. It is designed to sit within a groove and be compressed during assembly. It creates a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.The O-ring may be damaged if an outdoor piece of equipment is struggling to start or run. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance.This O-ring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. Examples of compatible products and machines includes trimmers, tillers, weed wackers, brush cutters, and leaf blowers or leaf vacuums. It is compatible for products made by the following brands: MTD, Cub Cadet, Craftsman, and Troy-Bilt.

This fuel gasket provides a seal for the gas cap. It prevents any leakage of gas into other chambers of the machine.It is very normal for a fuel gasket to undergo regular wear and tear over time and with exposure to the elements. When it comes time to be repaired or replaced, the fuel gasket will appear brittle or compressed. To replace a fuel gasket, the user simply has to remove the old one and insert the new fuel gasket inside of the machine's fuel cap. This fuel gasket is made out of composite material.This fuel gasket is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. A fuel gasket is essential in the proper operating of many outdoor lawn and garden machines, including but not limited to trimmers, brush cutters, engine sprayers, power brooms, leaf blowers and vacuums, hedge trimmers, and string trimmers. It designed for use to be compatible with products manufactured by the Shindaiwa and Echo brands.

This genuine OEM replacement part is a rebuild kit of various gaskets used in a gas-powered leaf blower engine. This kit includes a crankshaft gasket, a carburetor gasket and carburetor adapter gasket, a cylinder base gasket, and a muffler shield. Gaskets act like a seal between different parts of an engine that keeps different liquids and gasses from passing into the wrong section of the engine. Gaskets can become worn out and crack or shrink over time through repeated use and exposure to exhaust and heat in the engine. A common sign of a fault gasket is if your engine is not running at full capacity or if it stalls out shortly after ignition. Changing out a gasket should not be a difficult job, but it will depend on which gasket you are replacing. Making this repair will require a screwdriver and set of pliers. This gasket rebuild kit is compatible with Poulan, Weed Eater, and Husqvarna gas powered leaf blowers. These gaskets are made of a mix of plastic and rubber. This kit ships individually and is sourced directly from its original manufacturer.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

This is a quality gasket that is used in many types of Husqvarna hedge trimmers. It is made using flexible plastic and seals the upper and lower gearbox assembly connection. Gaskets create an air-tight seal that prevents dust, debris, and other items from moving into other components of the hedge trimmer. As the hedge trimmer is used, the gasket can start to wear out and leaks can occur. When this happens, the gasket in the hedge trimmer will need to be replaced.If the gasket in the hedge trimmer is worn out, a hex wrench and a screwdriver will be needed for the repair. Place the hedge trimmer on a level surface and remove the spark plug wire before starting the replacement. Use the tools to separate the two gearcase assembly sections on the equipment. This will offer access to the gasket which can be pried off of the surface. Clean the area before installing a new gasket in the trimmer.This gasket is designed for use with a variety of Husqvarna hedge trimmers. It is sold as an individual part. The gasket is an authentic OEM replacement component that is directly sourced from the manufacturer.