Lg Dishwasher Parts

A direct-replacement interior tray that provides a stable surface inside the appliance to hold dishes and catch spills. Replaces a cracked, warped or missing tray to restore a secure, easy-to-clean cooking or storage surface. What it does:

• Provides a level surface to hold food, pans or containers inside the appliance
• Helps contain spills and crumbs for easier cleanup and maintenance
• Restores correct fit and support when the original tray is damaged or missing
• Eliminates wobbling or instability caused by a broken or warped tray

• Always disconnect power to the appliance before servicing
• Remove any food, cookware and the damaged tray before installing the replacement
• Set the tray into position, aligning any tabs or slots; most tray installs are tool-free
• Handle carefully if the tray is glass or brittle; discard the damaged tray safely

This water guide directs water through the dispenser/ice path so water flows where it should, helping prevent leaks and misdirected dispensing. It's a small molded channel designed to route cold water inside the refrigerator. What it does:

• Guides and channels water from the supply toward the dispenser or ice-making area
• Helps prevent water from dripping into areas it shouldn't and causing puddles
• Supports consistent dispensing by keeping the water path aligned
• Commonly replaced when cracked, warped, or when water is leaking or pooling

• One water guide piece as shown

• Disconnect power and shut off the water supply before replacing
• Remove any interior shelves or panels as needed to access the guide
• Handle carefully to avoid damaging mounting tabs or adjacent seals
• Secure all clips; test dispenser and check for leaks after installation

A small replacement roller stop that secures and guides a moving drum or component, restoring smooth movement and preventing over-travel. Use this part to reduce rattling and help maintain proper alignment of the roller assembly. What it does

• Stops and cushions the roller to prevent parts from hitting the cabinet or frame.
• Helps maintain correct roller alignment for smooth rotation and reduced noise.
• Commonly used when worn, cracked, or missing rollers cause scraping, banging, or drum misalignment.

• One stopper roller.

• Disconnect power before performing any service to avoid shock or injury.
• Remove access panels and mounting hardware as needed; basic hand tools are usually sufficient.
• Inspect adjacent rollers, shafts, and mounts and replace any worn components for best results.
• Do not force parts during reassembly; ensure proper seating and alignment before restoring power.

A replacement push-style control button that restores tactile operation for electronic control panels. Replaces a worn, broken, or missing button so panel controls are easier to press and clearer to operate. What it does:

• Physically engages the control switch when pressed so selections register properly
• Replaces buttons that are cracked, loose, or missing and stops accidental button presses
• Helps resolve symptoms like unresponsive or intermittent button operation and broken or stuck buttons
• Matches original shape and mounting to fit the control panel opening

• One control button

• Power off and unplug the appliance before accessing the control panel
• Remove the control panel bezel or housing per the appliance service instructions to access the button
• Inspect the button retainer and switch for damage; replace any damaged fasteners or clips as needed

The Pump Gasket is an OEM part for LG dishwashers. It is designed to create a watertight seal between the pump and the tub, preventing water leaks during the dishwasher's wash and drain cycles. This gasket plays a crucial role in ensuring that water flows correctly through the pump without escaping, thereby maintaining the efficiency and performance of the dishwasher.

Causes of a bad pump gasket can include regular wear and tear from frequent use, exposure to high temperatures and harsh detergents, and damage from debris or foreign objects that might enter the pump area. These factors can lead to the gasket becoming brittle, cracked, or worn out, compromising its sealing ability.

Symptoms of a bad pump gasket include:

• Water leaking from the bottom of the dishwasher
• Dampness or puddles around the dishwasher during or after use
• Unusual noises or vibrations coming from the pump area

This OEM LG part is also compatible with Sears/Kenmore dishwashers.

The Dishwasher Drain Hose Assembly is an OEM replacement part for LG dishwashers. It is a crucial component responsible for draining the used water from the dishwasher tub and directing it to the appropriate drainage system.

Symptoms of a bad drain hose assembly include:

• Water leaks or pooling around the dishwasher base
• Slow draining or incomplete draining of water
• Unpleasant odors or mold growth due to water buildup

Causes of a faulty drain hose assembly can include clogs or blockages in the hose, cracks or damage to the hose material, or issues with the connections or fittings.

This OEM LG part is also compatible with select Sears/Kenmore dishwasher models. 

The Upper Rack Assembly is an OEM part for LG dishwashers. This part provides a durable and efficient space for washing glasses, cups, and smaller dishes. This assembly maximizes the cleaning capacity of your dishwasher, allowing for the organized placement of items to ensure they are thoroughly cleaned and dried.  

Causes for issues with the upper rack assembly often involve prolonged exposure to water and detergent, leading to rust or corrosion, physical damage from loading or unloading, or wear and tear from regular use.

Symptoms of a malfunctioning Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• Rust or corrosion that can lead to stains on dishes
• Broken or missing tines affecting the rack's ability to hold dishes securely

This OEM LG part is also compatible with some Kenmore models.

The Dishwasher Installation Bracket Kit is an OEM part for LG dishwashers. This kit includes brackets that secure the dishwasher to the countertop, cabinetry, or floor, ensuring it remains stable during operation. Proper installation of these brackets is essential for preventing excessive movement and vibration during the dishwashing cycle.

Over time, installation brackets can become loose or damaged due to constant vibrations, improper installation, or accidental impacts. If the brackets are compromised, the dishwasher may not be securely anchored, leading to various operational issues.

Symptoms of a bad installation bracket kit include:

• The dishwasher moving or shifting during operation
• Increased noise and vibration levels
• Difficulty in keeping the dishwasher level
• The dishwasher door not closing properly

This OEM LG part is also compatible with Sears/Kenmore.