Lg Dishwasher Parts

Mounts over the dishwasher's drying fan vent opening to shield the blower and direct airflow into the tub. Replace if cracked, damaged, or missing.

Fix dishwasher not draining or OE error codes with a new check valve. Prevents backflow and keeps water moving properly. Easy 30-minute DIY repair.

Color: blue. It measures about 3 inches wide by 1 inch high.

Replace a cracked, rusted, or broken dishwasher dishrack. Restores organized loading and keeps dishes securely positioned during wash cycles.

The Leg is an OEM part for LG dishwashers. It serves as a critical base component that elevates the dishwasher body above the floor for proper drainage. Legs are constructed with durable corrosion-resistant materials and adjustable height features to accommodate most flooring types. 

Symptoms of a bad leg can include:

• The dishwasher wobbles or is uneven during operation
• Standing water or improper draining of wash water  
• Visible damage like cracks, bending, or rust affecting stability

Causes of leg failure typically arise from normal wear over extended use of hard flooring. Replacing deteriorated legs restores the appliance's security and balance for optimum performance.

This affordable OEM LG part ensures the dishwasher stays firmly in place during cycles while conveniently adjusting to most installation situations. It provides customers with many more trouble-free years of use. This replacement leg is also compatible with KitchenAid models.

This guide assembly is the track that supports and directs a dishwasher rack as it slides in and out. Replace a worn or damaged guide to restore smooth rack movement, alignment, and reliable loading. What it does:

• Provides the sliding path that supports and guides the dishrack
• Maintains rack alignment to prevent derailment
• Helps the rack extend and retract smoothly without binding
• Common symptoms: rack hard to slide, tilts or falls off track, scraping/grinding noises, visible cracks or broken tabs on the guide

• 1 guide assembly

• Disconnect power and shut off water before servicing the dishwasher
• Pull the rack out and remove any end caps or stops to access the guide
• Release locking tabs or screws, note orientation, and swap the old guide with the new one
• Reinstall stops/end caps and test rack travel for smooth operation

Creates a watertight seal to prevent leaks in your dishwasher. Replace when worn or cracked to stop water damage. Confirm fit with your model number.

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

This roller assembly supports the dryer drum and lets it turn smoothly to help clothes tumble evenly. Replacing a worn roller restores proper drum rotation and reduces noise and wobble during use. What it does:

• Supports the dryer drum on a stationary shaft so the drum spins freely
• Reduces squeaking, grinding, or scraping noises from a worn roller
• Helps prevent drum wobble and uneven tumbling that can affect drying
• Restores smooth rotation for improved operation and reduced wear on other components

• One roller assembly

• Disconnect power before starting and remove the dryer back panel to access the drum rollers
• Inspect adjacent parts (belt, glides, rear bearing) and replace if worn to avoid repeat failures
• Reinstall drum and panels carefully, ensuring the roller rides squarely on the shaft and the drum is aligned
• Test spin by hand before reconnecting power and running a short cycle to confirm quiet, smooth operation

Replacement rack roller wheel for dishwasher lower or upper rack assemblies. Install when original wheels are cracked, broken, or worn causing rough rolling.

Mounting bracket that secures dishrack components in place inside your dishwasher. Replace if cracked, broken, or missing to restore stability.

Secures dishwasher components in proper alignment for quiet operation. Replace if bracket is worn, broken, or parts have become loose. Confirm fit with your model number.

This parts assembly is a direct-replacement assembly used to restore the original mechanical/electrical components it contains so the appliance can operate as designed. It replaces a worn or damaged assembly to help resolve related failures. What it does

• Replaces the factory assembly that houses the appliance's internal components and connections.
• Restores proper component alignment and secure mounting to prevent intermittent faults.
• Addresses symptoms such as failure to operate, unusual noises, loose or damaged internal parts, or intermittent electrical/connectivity issues.
• Works as the factory-specified repair for units showing wear or damage in the affected assembly area.

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or injury.
• Handle internal components carefully to avoid damage to wiring, connectors, or sensors.
• Follow the OEM service manual and wiring diagrams for correct installation and routing.

Replacement rack rail assembly for dishwashers. Guides and supports dish racks for smooth sliding. Needed when rails are cracked, broken, or worn.

Replaces the front cabinet frame that provides mounting surface for door components. Needed when original frame is cracked, bent, or damaged.