Parts for Amana AGG200AAW0: 03 - Manifold Parts

Fix rattling or loose components caused by vibration with this jam nut. Secures threaded connections on gas ranges and cooktops to prevent backing off.

Fix gas leaks or broken burner ignition with a new front burner gas tube. Routes natural gas from manifold to cooktop burner. 10-30 minute DIY repair.

Venturi tube for gas range front burner. Replaces cracked, broken, or leaking tubes damaged during cleaning or stove top lifting. Essential gas supply part.

Pilot won't stay lit on your range? A failing thermocouple prevents the safety valve from keeping gas flowing. This replacement part restores reliable ignition.

Fix poor gas flow or uneven burner flames with new venturi tubing. This part channels gas properly to burners. Takes 15-30 minutes to replace.

Fix cracked or leaking gas venturi tubes on your range burner. Simple repair requiring basic tools and 3 screws. Connects burner valve to orifice.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Secures panels, brackets, and internal components in your range. Replace stripped, missing, or damaged screws to keep parts properly aligned and secured.

Replace a worn surface burner valve to restore smooth flame adjustment and prevent gas leaks. Rated 2/5 difficulty for DIY replacement on gas ranges.

Pilot thermostat for gas ranges. Senses oven temperature and regulates burner operation. Replace if faulty, worn, or causing inaccurate temperature control.

Replacement U-nut for electric and gas ranges. Secures components and panels in place. Order a new nut if yours is stripped, missing, or damaged.

This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.

• Provides machine-thread fastening for panels, brackets, and internal parts
• Helps eliminate rattling, vibration, and loose fits
• Restores proper attachment when the original screw is stripped, missing, or corroded
• Used wherever an 8-32 screw is specified in the service manual or parts list

• Disconnect power to the appliance; turn off gas/water if applicable
• Match the screw to the original location to confirm size and thread
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten to prevent stripping or cracking

Replacement burner orifice (1.25) that controls gas flow to the burner for proper flame and cooking performance. Use when an orifice is clogged, damaged, or the wrong size for correct burner output. What it does:

• Regulates gas flow to the burner so the flame burns steadily and the cooktop reaches expected heat.
• Helps correct weak, uneven, or sooty flames and inconsistent burner heating when the orifice is the cause.
• Restores proper burner output after clogging, corrosion, or damage from wear or debris.

• Turn off the appliance power and shut off the gas supply before replacing.
• Verify the orifice size required for your fuel type and appliance before installation; do not file or modify the part.
• Tighten securely but avoid overtightening; check all connections for leaks after installation using an approved leak-detection method.
• If you smell gas or suspect a leak, turn off the gas immediately.

Natural gas.

Thermostat to oven pilot tubing carries gas from the thermostat to the pilot light. Replace if damaged, cracked, or leaking gas. Confirm fit with your model.

Support bracket for gas ranges. Secures internal components in place. Replace if bracket is bent, cracked, or broken to restore proper structural support.

Mounting bracket for gas ranges. Secures components in place. Replace if bracket is bent, cracked, broken, or missing to ensure proper installation.

Gas supply tube fitting for range connection. Replaces worn, damaged, or missing fittings. Essential for secure gas line installation and connections.

Fix a burner that won't light or clicks repeatedly with a new spark electrode. Creates the electrical arc that ignites gas at your cooktop burner.

Fix burners that click but won't light with this gas range surface burner igniter. DIY-friendly repair takes about 10 minutes with basic tools.

This is a small metal mounting clip used to secure the spark electrode (igniter) in place near a surface burner on a gas range. It holds the igniter at the correct position so the spark can reliably ignite the gas when the burner knob is turned. Replace this clip if the igniter is loose, misaligned, or has fallen out of position, causing unreliable burner ignition.

Gas tubing for gas ranges. Connects gas supply to burner components. Replace if cracked, kinked, or leaking to restore safe gas flow to your range.

This is an inverted flare nut with 3/8-24 UNF threading used on gas tubing connections in a range or oven. It creates a secure, leak-free seal where gas supply lines connect to the appliance. Replace this nut if it is stripped, cracked, or damaged, which can result in gas leaks or loose tubing fittings.