Mastercut Parts

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

This carbon canister is a device used to control the amount of gas pollution that is released from small engines found in various lawn and garden machines. This is a genuine OEM replacement part that is sourced from the manufacturer. It is an emission control device also known as a charcoal canister. As gas evaporates from the fuel tank, the carbon canister catches the fumes and releases them into the engine so that they are not dispersed into the atmosphere. Age and regular use may cause the canister to crack or break and not hold the fumes inside. Typical signs that the canister needs replaced include strong fuel odors or leaking from the canister. If the canister is flooded by fuel, the canister will not operate properly. Fuel will spill out, and the canister will need to be replaced. Before replacing the carbon canister, empty the fuel from the machine and remove the spark plug wire for added safety. This repair should be made in a well-ventilated area.The carbon canister is made from heavy-duty plastic and is sold as an individual unit. It is compatible with tillers, chippers, and other small engines manufactured by MTD, Cub Cadet, Yard Machines, and Troy-Bilt.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This air filter cover is a genuine OEM replacement part sourced directly from the manufacturer. It is designed to fit various lawn and garden engines. The air filter cover is a durable plastic piece that snaps to the machine to cover the air cleaner and filter to protect them from external dirt and debris that would shorten the filter's lifespan. This cover is exposed to the elements, and may be damaged by rocks and other debris during machine use. Normal wear and tear due to age can also lead to the cover's damage. If the cover is damaged, it should be replaced. The machine should not be operated without a functional air filter cover.Wear gloves when doing any work on the machinery. Unsnap the cover and remove it from the machine. Remove the spark plug before starting to prevent accidental engine operation. While the cover is off, check the air filter and air cleaner. If necessary, change these out while the cover is being serviced. Snap the new cover into place. This air filter cover is made of durable black plastic. It is sold as an individual unit that is compatible with tiller engines and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This part is a replacement V-belt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, snapped, or otherwise defective V-belt in lawn mowers and tractors.The V-belt, or transmission belt, transfers torque from the engine to power the equipment. Belts are subject to significant wear and tear, causing them to wear down, become brittle, or snap, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this V-belt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This V-belt can be used with lawnmower and lawn tractor models that have been manufactured by MTD, Yard Machines, Bolens, Troy-Bilt, Yard Man, and Husky. Sold individually.

This V-belt is a genuine MTD part, sold individually. This V-belt can be used as a replacement part for lawnmowers. The v-belt of a lawn mower is operated by a network of pulleys that work in conjunction to turn the belt powered by the engine. The purpose of the V-belt for a lawnmower is to rotate the lawnmower blades.A V-belt might suffer damage that can stop the belt from helping the lawn mower blades to rotate and mow effectively. Symptoms of a damaged v-belt can include visible cracks, deterioration, or erosion, or visible damage to the side wall. If any of these symptoms are attributable to a malfunctioning or damaged V-belt, the component should be removed and replaced with this genuine OEM replacement part before operating the lawn mower again. Remember to wear gloves when handling, repairing, and using outdoor equipment.This is an OEM part sourced directly from the manufacturer, and it is sold individually. This V-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard-Man, and MasterCut.

This is a replacement seat. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken or worn-out seat on various models of riding lawn equipment. This particular seat has a medium back height.A functioning seat in good working condition is important when operating riding lawn equipment. If the seat is completely broken or detached, the equipment may be rendered unusable. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part and work gloves are advised. For more accurate information on how and where to install this medium back seat, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this seat is suitable for use on several different models of riding lawnmowers and lawn tractors manufactured by MTD, Cub Cadet, Yard Machines, and Yardman. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This part is a right-hand front axle assembly that is used on lawn tractors. This particular axle is located on the right-hand side at the front of the lawn tractor. An axle is a component to which the lawnmower wheels are fitted. The axle supports the weight of the lawnmower.A new right-hand front axle assembly may be needed if the lawnmower is making a clicking noise when turning, if there is a knocking sound, or if grease can be seen on the inside or on the edge of the tires. The lawnmower operator may also notice excessive vibrations when operating the lawnmower. If this is the case, the axle will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This part is a genuine MTD part. It is sold individually. This particular right-hand front axle assembly is compatible with lawn tractors that are manufactured by MTD, Ryobi, Yard Machines, Yard-Man, Troy-Bilt, and Husky.

This replacement part is a height adjuster assembly, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Height adjuster assemblies allow the user to adjust the height of the blades on a mower to change the length grass will be cut to. This device is essential so that the user can customize the job during each lawn cutting. A new height adjuster assembly might be needed if the user notices that the current one is no longer working. If the user is unable to adjust the height of the blades, it might be time to replace the height adjuster. Be sure to wear working gloves during this repair as this part is situated close to the blades of the lawn mower and can be dangerous if not properly protected. This height adjuster is sold individually. Note that it is also a genuine OEM replacement part and is sourced directly from the manufacturer.

This is an oil filter that facilitates the removal of harmful contaminants from the engine oil. This part is designed to help maintain the optimum performance of an engine in compliance with the necessary EPA emissions regulations. It is recommended that the oil filter is replaced annually or every 100 hours. Remember to prepare something to catch the oil when replacing the oil filter. The old one will need to be unscrewed to replace it, but be sure to coat the seal of the new filter with oil before installing it. To ensure that the new oil filter is in place, make sure it touches the plate it seals against by giving the filter a firm turn to tighten it down. This replacement part is an individual genuine OEM part. It is compatible with small engines, lawnmowers, generators, snowblowers, and wood chippers from Toro, Lawn-Boy, Simplicity, Snapper, and Briggs & Stratton.