Maytag Dryer Spring Parts

The Idler Arm Spring is an OEM part for Whirlpool dryers, maintains tension in the dryer's belt system. This spring is crucial for the proper operation of the dryer, as it helps to keep the belt tight around the drum and motor pulley, enabling the drum to rotate smoothly during cycles.  

Causes of a bad Idler Arm Spring can include stretching or weakening over time due to constant tension, or breakage from wear and tear.  

Symptoms of a bad Idler Arm Spring include:

• Unusual noises, such as squeaking or squealing 
• The dryer drum may not rotate smoothly or may stop turning altogether  
• Clothes take longer to dry, or you may notice uneven drying 
• The dryer might not start if the belt is disengaged due to insufficient tension.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Spring Idler is an OEM replacement part for Speed Queen residential clothes dryers. It works with the dryer drum to facilitate the controlled tumbling of laundry items during the drying cycle. Proper functioning is important for efficiency and effectiveness.

Causes of a bad spring idler can include material fatigue from years of repetitive use. It can also result from overloading the dryer with excessively heavy wet loads that put abnormal stress on the idler mechanism.

Symptoms of a failed spring idler include:

• The dryer drum not rotating smoothly
• Clothing failing to tumble freely and wrinkling instead
• Prolonged drying cycles and increased energy use
• Noisy squeaking or creaking emanating from inside the dryer

As the mechanism responsible for facilitating optimal tumbling, this OEM Speed Queen replacement idler spring restores smooth and efficient dryer operation.

This idler spring maintains proper tension on the dryer's drive belt by pulling the idler arm. Replacing a weak or broken spring restores consistent drum rotation and helps prevent belt slippage and noise.

• Applies tension to the idler pulley arm to keep the drive belt tight
• Helps the motor turn the drum smoothly without belt slip
• A worn, stretched, or broken spring may cause the drum not to turn or the belt to slip off
• Can contribute to squealing or chirping from the belt/pulley area

• Disconnect power; turn off gas supply for gas dryers
• Access the belt path; note belt routing and spring attachment points before removal
• Release belt tension, move the idler arm, attach the new spring, and re-tension the belt
• Rotate the drum by hand to verify belt tracking before reassembly and test run

The Natural Gas Spring is an OEM part for Whirlpool ranges. This part assists in regulating the flow and pressure of natural gas to the burners, ensuring consistent and safe operation. The spring helps maintain the correct pressure within the gas regulator, which is vital for efficient cooking performance.

Causes of a bad natural gas spring can include wear and tear from prolonged use, exposure to high temperatures, or contamination from particles within the gas line.  

Symptoms of a bad natural gas spring include:

• Inconsistent or weak burner flames
• Difficulty in lighting the burners or oven
• Irregular cooking temperatures
• Unusual noises or gas odors near the regulator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

For the complete ice door kit order W10823377.

This door spring counterbalances your dishwasher door so it opens and closes smoothly without slamming. Replacing a fatigued or broken spring restores proper tension and helps protect the hinges and latch.

• Provides counterbalance tension to the door through the hinge mechanism
• Helps the door open and close with controlled movement and stay in position
• Symptoms of failure can include a door that drops quickly, feels heavy, or won't stay put
• May also cause popping/squeaking noises or uneven action on one side of the door

• Disconnect electrical power and turn off the water supply before servicing
• Remove the toe panel/kick plate to access springs near the hinges
• Carefully relieve and reattach spring tension; wear gloves and eye protection
• Ensure both sides are tensioned evenly after replacement

This is the idler tension spring that holds the dryer belt tight for smooth drum rotation and reliable drying. It restores proper belt tension to help eliminate slipping and uneven drum movement. What it does:

• Applies tension to the dryer idler assembly so the belt stays engaged with the drum and motor pulley
• Helps stop belt slippage that can cause the drum to not turn or to turn intermittently
• Reduces squealing or rubbing noises caused by a loose or worn tension spring
• Works with the idler pulley and belt to maintain consistent drum rotation during operation

• 1 idler tension spring

• Disconnect power to the appliance before any service to prevent shock or injury
• Access may require removing the dryer front or top; follow OEM service instructions for your model
• Relieve belt tension carefully when removing/installing the spring; use gloves and eye protection
• After installation, verify proper belt alignment and test a short cycle to confirm normal operation

This spring provides tension for the door hinge, helping the door open and close smoothly and stay properly balanced. Replacing a weakened or broken spring restores correct door movement and prevents slamming or drooping.

• Maintains tension on the door hinge mechanism
• Helps the door stay level and close securely
• Can reduce issues like a sagging, loose, or slamming door
• Restores smooth, controlled door operation

• Disconnect power and shut off gas or water (as applicable) before service
• Support the door to relieve hinge tension prior to removal
• Note spring orientation/routing before replacing
• Wear cut-resistant gloves; hinge areas can be sharp and under tension

This idler spring maintains proper tension on the dryer drum belt by keeping the idler pulley engaged. Replacing a weak or broken spring restores consistent drum rotation and helps prevent belt slippage and squealing during operation.

• Maintains belt tension by pulling the idler arm/pulley against the drum belt
• Helps the motor start and keep the drum turning smoothly
• Reduces belt slippage that can cause squealing or chirping
• Common symptoms of a failed spring: drum won't turn or turns intermittently; belt comes off or feels loose; loud squeal from idler area

• Disconnect power; for gas dryers, shut off the gas supply
• Access the idler assembly; relieve belt tension and note belt/spring routing before removal
• Attach the new spring to the same holes/orientation on the idler arm and base; verify belt path
• Rotate the drum by hand to confirm alignment and tension before reassembly

This spring-timer knob replaces a worn, cracked or missing timer knob so you can set and adjust the appliance's mechanical timer reliably. Simple, direct replacement that restores the user control interface. What it does:

• Fits onto the appliance's mechanical timer shaft to allow setting and advancing the timer
• Restores a secure grip and pointer for accurate time selection
• Commonly used to fix loose, cracked, stripped, or missing timer knobs
• Helps resolve inability to turn or set the mechanical timer caused by a damaged knob

• Disconnect power to the appliance before starting any repair
• Pull the old knob straight off the timer shaft; align splines and press the new knob fully onto the shaft until seated
• If the knob is tight, use a proper knob puller or gentle, even leverage to avoid damaging the shaft