Maytag Range / Cooktop / Oven Knob, Dial & Button

This genuine replacement control knob restores secure, easy-to-use control of your appliance's settings. It provides a clear grip and pointer so selections are easy to read and change. What it does

• Replaces a cracked, stripped or missing control knob so the control shaft can be turned smoothly
• Restores a visible pointer for accurate temperature or cycle selection
• Helps prevent slipping or accidental changes by providing a firm grip
• Fits on a splined control shaft to engage the selector mechanism

• One control knob

• Remove the old knob by pulling it straight off the control shaft; push the replacement knob fully onto the shaft until seated
• If knob is tight, pull with a steady, even force or use a non-marring puller tool
• Disconnect power to the appliance before servicing if removal requires access behind the control panel
• Do not force onto an incompatible shaft; verify spline match before installation

This shaft-bit generator is a replacement drive shaft component that transfers motor rotation to the appliance's moving assemblies, restoring proper mechanical motion and reducing noise from damaged or worn shaft parts. What it does:

• Transfers rotary motion from the motor to the driven components for normal operation
• Helps maintain alignment and smooth rotation of connected parts
• Worn or broken units can cause grinding, rattling, or loss of movement
• Replacing a failed shaft can stop intermittent operation and restore reliable performance

• High-level replacement only: remove power before accessing internal assemblies
• Follow appliance-specific disassembly steps; secure panels and wiring before removing the old shaft
• Inspect adjacent bearings, seals, and mounting hardware; replace any damaged items

Color: chrome. It measures about 2 inches in diameter.

The Knob is an OEM part for Whirlpool cooktops. It is used to control the settings of the appliance, such as the temperature and cooking modes, by turning the control shaft.

Over time, knobs can wear out or become damaged due to frequent use, accidental impact, or exposure to heat. A faulty knob can make it difficult to adjust the appliance settings accurately.

Symptoms of a bad knob include:

• Difficulty turning the knob
• Knob slipping or not staying in place
• Cracks or breaks in the knob
• Inaccurate setting adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

This thermostat knob is the control dial that lets you set temperature or cycle settings on compatible Whirlpool appliances. It restores a secure grip and clear position reference so you can select settings easily. What it does

• Replaces a missing, cracked, or stripped thermostat/control knob
• Provides a tactile grip and visible indicator for accurate temperature or cycle selection
• Helps resolve issues where the control is hard to turn or slips on the shaft
• Fits on the appliance's thermostat/control shaft to restore normal operation

• Disconnect power to the appliance before servicing to avoid electrical shock
• Pull the old knob straight off the control shaft; align the new knob's splines with the shaft and push on firmly
• If the knob is tight or stuck, use a non-marring pry tool and work gently to avoid damaging the control panel
• If the shaft or underlying control is damaged, replace the control assembly rather than forcing the knob

This surface burner control knob replaces a worn gas knob on your range or cooktop, restoring a solid feel and precise flame adjustment so you can reliably turn burners on, set heat, and shut them off.

• Mounts on the surface burner valve stem to control gas flow and heat level
• Addresses cracked, stripped, or missing knobs
• Helps when a knob spins without engaging the valve or feels loose
• Restores clear, consistent control of burner on/off and flame settings

• Turn all burner controls to Off, unplug or disconnect power, and allow the surface to cool
• Pull the old knob straight off the valve stem; avoid prying with tools that could damage the panel
• Align the new knob with the stem and press straight on until fully seated
• Verify smooth operation through Off, Ignite, and Low-to-High settings

Color: black. It measures about 2 inches in diameter.

Color: White/chrome

A replacement burner knob for electric ranges that restores reliable control of a surface element. Simple, direct fit for the matching original control shaft and restores user control of heat settings. What it does

• Replaces a worn, melted, cracked, or missing burner control knob to allow safe adjustment of the surface element.
• Engages the stove/range control shaft so settings click and hold as intended.
• Helps prevent slipping or inaccurate temperature selection caused by a damaged knob.
• Matches the original shape and fit for intuitive operation.

• One replacement burner knob (single).

• Install is typically plug-and-play: pull off the old knob and push the new knob onto the control shaft; no tools usually required.
• Disconnect power to the appliance before working near controls if removing any control panel components.
• If the knob does not seat properly, stop and verify shaft style to avoid damage.

Control knob that replaces a damaged or missing range control knob, restoring safe, reliable selection of heat settings. Provides secure grip and positive detents for accurate temperature adjustment on electric range controls. What it does:

• Fits onto the control shaft to select heat levels for electric surface burners or range controls.
• Replaces cracked, stripped, loose, or missing knobs that won't turn or slip on the shaft.
• Restores clear tactile stops and improves ease of setting burner or oven heat.
• Helps eliminate unsafe or imprecise temperature control caused by a compromised knob.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob does not fit or the shaft is damaged, do not force the part—inspect and replace the underlying switch or shaft assembly if needed.
• Restore power and verify correct operation of all control settings after installation.

This replacement gas control knob restores positive, easy control of a range burner valve so you can adjust flame settings and operate the burner smoothly. Simple swap for a worn, stripped, or missing knob. What it does:

• Turns the burner valve to set flame height and turn the burner on/off
• Replaces cracked, stripped, loose, or missing knobs that slip on the valve stem
• Restores tactile, indexed control for accurate heat adjustments
• Helps eliminate spinning or wobbling while you operate the burner

• Always shut off the appliance power and gas supply before servicing.
• Most installs are push-on: pull the old knob straight off the valve stem and align the new knob's splines, then push until seated.
• If the knob won't seat or the valve stem is damaged, stop and inspect the valve; do not force the knob.

This replacement control knob restores a clean, secure grip so you can select appliance settings smoothly. It fits onto the control shaft to operate the switch or valve when the original dial is cracked, stripped, loose, or missing.

• Turns the control shaft to select temperature, cycle, or function
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores positive engagement with the underlying control
• Common symptoms: knob spins without turning the control, falls off, or wobbles

• Disconnect power; if working on a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft
• Align the new knob with the shaft and press straight on—do not force
• If the control stem is damaged, replace the control before installing the new knob

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly