Mcculloch Starter

This is a genuine replacement recoil spring that is designed to be used with select lawn and garden equipment engines. The recoil spring is part of the starter pulley assembly. When the starter rope is engaged, the pulley will then engage the recoil spring, which retracts to cause the spinning that helps power the engine. This spring is subject to constant use and can become stretched or even snap over time and with regular use.This genuine OEM recoil spring is manufactured by MTD and designed to exact standards. It can be used in models from MTD, as well as those from RYOBI, Troy-Bilt, Yard Man, Yard Machines, and Bolens. The recoil spring is made of durable metal and sold as an individual part. The rest of the starter components will need to be purchased separately if they need replaced. Always wear gloves when performing engine repairs and be careful when working on the starter system because the springs and pulleys can be under a lot of pressure. Allow the engine to cool completely and disconnect the power before getting started.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

A recoil pull-start assembly is the engine's starting mechanism. The machine operator pulls on the rope, which activates the pulley system to start the machine's engine. This part is a recoil pull-start assembly kit contains a rope, a pulley, and an innerspring, which are all of the components of the pull start assembly. A pull-start assembly kit may be needed if the recoil or pulley system has broken due to use over time. The rope may become broken or frayed and the plastic on the pulley could crack. While the rope itself is available separately, it's a good idea just to replace the entire pull start assembly kit while in the process of replacing any of the components to ensure even wear. This genuine OEM MTD part is sourced directly from the manufacturer. It is sold individually. It is used on blowers, vacuums, and trimmers that are manufactured by Craftsman, Bolens, MTD, and Troy-Bilt.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.