Parts for Ge PEB159CDN1BB: 01 - Microwave Parts

Replace your burned-out microwave cavity bulb to restore bright interior lighting. Essential when light is dim, flickering, or out completely. Confirm fit with your model number before ordering.

Mounting screw for built-in microwaves and microwave/hood combos. Secures unit to cabinet or wall bracket. Replace if stripped, missing, or corroded.

Lamp cover that protects the interior light bulb in your microwave. Replace if the original cover is cracked, broken, or missing to shield the bulb.

Fix convection oven not reaching set temperature with this thermistor. Restores accurate temp control when oven runs too cool or won't preheat properly.

Microwave not ventilating or making loud grinding noises? This fan motor restores proper airflow and cooling. Moderate DIY repair with basic tools.

If your microwave turntable wobbles or doesn't rotate smoothly, this shaft ring secures the rotating shaft and keeps components aligned. Quick fix.

This heater sheath is the protective metal sleeve that surrounds a dryer/oven heating element, helping protect the element and channel heat where it's needed. It replaces a worn or damaged sheath to restore safe operation. What it does:

• Protects the heating element from physical contact, debris, and shorting
• Helps direct heat flow for consistent heating performance
• Reduces risk of element damage from rubbing or impacts
• Can prevent intermittent heating caused by a compromised sheath

• One heater sheath

• Disconnect power (and gas if applicable) before servicing; follow all safety precautions
• Handle heating elements and terminals carefully to avoid bending or damage
• Basic hand tools required;

Wire harness for microwave ovens. Connects internal electrical components. Replace if wires are frayed, connectors are damaged, or harness is burned.

Microwave overheating or shutting off? This motor cooling fan blade circulates air to prevent overheating. Easy 15-minute replacement for most models.

This motor bracket secures the appliance motor to the housing, keeping the motor stable and aligned for reliable operation. It's a direct-fit replacement designed to restore proper motor positioning and reduce vibration or noise. What it does:

• Holds and supports the motor assembly in the correct position
• Maintains alignment between the motor and driven components (fans, pulleys, etc.)
• Reduces motor vibration and prevents contact with adjacent parts
• Faulty or cracked brackets can cause rattling noises, excessive vibration, or motor misalignment

• Install with power disconnected; follow manufacturer instructions for access and disassembly
• Use the factory mounting hardware and torque specs where specified
• Inspect surrounding mounts and fasteners; replace any worn or damaged hardware

Microwave not cooling or fan not running? This fan motor circulates air and cools internal components. Moderate DIY repair in 30-45 minutes.

Microwave runs with door open or won't start? This door interlock switch fixes unsafe operation. Most DIYers replace all 3 switches in 30 minutes.

Fix a microwave that won't start, runs with door open, or has a resetting clock. This door latch switch holder secures door switches for proper operation.

Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.

Fix a microwave door that won't latch or stay closed with this door latch assembly. Repairs push-button issues and restores proper door closure.

A flat housing case that replaces a damaged or worn outer cover to restore proper fit and protection for internal components. Helps maintain appliance appearance and keeps wiring and mechanisms shielded from dirt and accidental contact. What it does:

• Replaces a cracked, warped, or broken outer housing to restore secure component coverage
• Protects internal wiring and mechanisms from dust, spills, and accidental contact
• Helps ensure panels and adjacent parts align correctly for normal operation
• Useful when visible damage or mounting tabs are bent or missing

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use proper tools and retain all fasteners and clips for reinstallation
• If mounting tabs or clips are damaged, replace them to ensure a secure fit

Outer case back screw for microwaves. Secures the back panel to the microwave cabinet. Replace if screw is stripped, missing, or damaged.

Replace your microwave's power cord assembly if the original is frayed, damaged, or missing. Connects microwave to electrical outlet safely.

Fixes weak ventilation, excessive noise, or overheating in your microwave. This blower wheel restores proper airflow to clear steam and cool components.

Microwave not heating? The magnetron generates the radiation that cooks food. Moderate DIY repair—discharge capacitor first, then swap 3 screws.

Mounting bracket assembly for microwaves. Installs to secure the microwave in place. Replace if bracket is bent, cracked, or broken during installation.

Microwave convection oven not heating or temperature incorrect? This thermostat regulates oven temperature. Common fix for heating issues. Moderate DIY.

Microwave not heating? High voltage capacitor stores energy to power the magnetron. DIY repair typically takes 30-60 minutes with proper safety care.

Microwave not heating? A failed diode prevents the magnetron from generating heat. This high-voltage component converts AC to DC power. DIY repair.

This heater holder is the mounting bracket that secures the oven heating element in place so the element stays aligned for reliable heating and safe operation. It helps prevent movement that can cause uneven cooking or damage. What it does:

• Holds and stabilizes the oven/heater element in the cavity so it stays properly positioned
• Keeps the element from contacting other components, reducing the risk of shorts or damage
• Helps maintain even heat distribution by preventing element sagging or misalignment
• Fits where the element mounts and supports normal operation of the heating circuit

• One heater holder/mounting bracket

• Turn power to the appliance off at the breaker before servicing to avoid shock
• Inspect the element and surrounding insulation for damage when replacing the holder
• Typically secures with screws or clips—retain hardware and note orientation for reassembly

Secures the lead wire assembly inside your microwave. Replace if screw is stripped, missing, or no longer holds wiring securely in place.

Plastic cap that covers the bottom leg or foot of your microwave. Replace if cracked, broken, missing, or worn to restore the finished look.

Plain washer for built-in microwaves and wall ovens. Replaces worn, missing, or damaged washers during repairs or maintenance. Essential hardware.

Hexagon nut for microwave interior assembly. Secures components and panels in place. Replace if stripped, corroded, or missing during repairs.

Fix loose or vibrating microwave components with this spring lock washer. Secures internal parts and reduces operational noise. Easy 5-minute fix.

Replace your cracked, broken, or missing microwave glass cooking tray. Sits on the turntable to hold food during heating for even rotation and cooking.

Female D shaft

Protects microwave magnetron from steam and food splatter. Replace if punctured, burned, cracked, or disintegrated to prevent arcing and component damage.

Replace your microwave's worn or broken start button. This control panel button installs on the front interface and restores proper operation appearance.

Replace a worn, cracked, or missing cook button on your microwave control panel. This push button installs on the front panel to restore tactile control.

Control knob for microwave door or timer dial. Replaces cracked, broken, or missing knobs. Restores proper grip and appearance to control panel.

Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.

Single wire harness for microwaves. Connects internal electrical components. Replace if wires are frayed, connectors are damaged, or harness is missing.

Mounting screw that secures the power control module inside your microwave. Replace if screw is stripped, missing, or damaged during service work.

The Smart Board is an OEM part for GE Microwaves. As the central control system, this board regulates all primary functions including power levels, cooking times, safety features, and the digital interface. 

Causes of a faulty smart board can include failures over time from repeated heat cycling during use. Electrical fluctuations or physical damage from drops or impacts may also degrade functionality.

Symptoms include:

• Buttons or controls not responding as expected  
• Display errors like dimming or freezing
• Timer malfunctions such as inaccurate countdown
• Safety features failing to operate properly 

This GE replacement board is compatible with Hotpoint, RCA and select Kenmore models as well.

Protective guard that covers and secures the microwave's interior window area. Replaces cracked, discolored, or missing guards to restore appearance.

Complete outer door assembly for your microwave. Replaces cracked, dented, or warped doors. Includes outer structure, trim, and glass for restoration.

Door choke cover for microwave ovens. Installs on the door assembly to provide proper shielding. Replace if cracked, broken, or missing.

Replacement door latch spring for microwaves. Installs in the door assembly to maintain proper tension. Needed when spring is broken, stretched, or missing.

Color: Black

White control panel button for microwave operation. Replaces cracked, broken, or missing buttons on the control interface. Direct-fit cosmetic part.

Fix a microwave clock or timer that won't advance with this AC synchronous motor. Restores gear-driven timing functions. Straightforward repair.

Back cover panel for your microwave. Installs on the rear of the unit to enclose internal components. Replace if cracked, dented, or missing.

Hardware screw kit for microwaves. Includes screws, nuts, and washers for assembly and mounting. Replace missing, stripped, or damaged fasteners.

Binding head screw secures panels and brackets inside your microwave or wall oven. Replace if screw is stripped, missing, or damaged during service.

Mounting screw that secures the power control module inside your microwave. Replace if screw is stripped, missing, or damaged during repairs or maintenance.

Truss head tapping screw for microwave assembly. Secures internal components and panels. Replace if screw is stripped, missing, or lost during repair.

A single truss-head tapping screw used to secure panels, brackets and components in appliances. Its wide head helps distribute load and reduces panel pull-through for a stable fit and quiet operation. What it does

• Fastens metal or plastic panels, trim pieces and small brackets
• Replaces missing or damaged screws that cause loose panels or rattling
• Designed to cut its own mating thread for secure engagement
• Wide truss head spreads load to protect soft or thin materials

• Use the correct-size screwdriver or bit to avoid stripping the head
• Start straight and apply steady pressure so the screw cuts clean threads
• Do not overtighten — stop when seated to avoid cracking plastic or stripping threads
• Disconnect power to the appliance before servicing and follow OEM safety guidance

Mounting support plate that secures the control panel assembly in your microwave. Replace if cracked, warped, or broken to restore proper alignment.

Truss-head self-tapping screw for securing microwave panels, trim, and brackets. Replace lost or damaged mounting screws to restore fit.