Parts for Ge GUD27EEPV0DG: Motor Drive Assembly Parts

Secures panels and internal components in your laundry center. Replace this 1/4-20 Taptite hex washer-head screw if missing, stripped, or worn.

This 5/16-18 hex screw is a genuine replacement fastener for appliance assemblies. It restores secure mounting for panels and components so parts stay aligned and rattle-free during normal use. What it does:

• Fastens and secures panels, brackets, and components in appliance assemblies
• Restores proper alignment when original screws are missing or loose
• Helps stop rattling, vibration, and intermittent contact caused by loose fasteners
• Provides the correct thread size for a reliable, OEM-fit connection

• Use the correct 5/16-inch hex driver or socket; do not force mismatched tools
• Disconnect power (and gas where applicable) and follow appliance safety procedures before working
• Tighten snugly but avoid over-torquing to prevent thread or part damage
• Replace any corroded or stripped mating hardware for best results

Hex pan thread screw for washer dryer combo units. Secures panels and components to the frame. Replace missing, stripped, or damaged fasteners.

If your agitator is loose, wobbly, or rattling during wash cycles, this agitator screw secures it to the drive hub for stable operation. Simple fix.

Fix loud clunking or grinding noises during spin cycle with this transmission platform assembly kit. Connects transmission to tub for proper operation.

This bracket connector is a small metal mounting bracket that secures wiring or components inside the appliance, restoring stable alignment and connection points. It helps stop loose wires or parts from shifting and reduces intermittent electrical contact. What it does

• Provides a secure anchor point for wiring harnesses or small components
• Prevents strain on electrical connections that can cause intermittent operation
• Keeps internal parts aligned to reduce rattle and wear
• Replaces a damaged or missing mounting bracket to restore factory fit

• Inspect surrounding wiring and fasteners; replace any damaged clips or screws.
• Secure bracket with the original screws or the correct-size fasteners; do not overtighten.
• Disconnect power before accessing internal components to avoid shock or injury.

This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.

• Maintains proper tension on the shift mechanism between agitate and spin
• A worn or broken spring can cause no spin, no agitate, or loud shifting noises
• May also lead to intermittent shifting or incomplete cycles
• Restores consistent mechanical engagement of the drive system

• Unplug the washer and shut off water supply before servicing
• Access is typically from the cabinet/rear; support the tub to prevent movement
• Note spring orientation and attachment points before removal
• Use needle-nose pliers or a spring tool; replace any severely worn mating parts

Fix a washer that won't spin with this clutch assembly. Restores proper spin speeds and reduces excessive noise during the spin cycle. DIY repair.

Washer won't fill or advance past start? Mode shifter assembly controls transitions between wash, spin, and dry cycles. Moderate DIY repair, 1-2 hours.

The Transmission Pulley Kit is an OEM part for GE washers. It includes nuts, washers, and other key components for connecting the transmission to the drive motor. This kit plays an essential role in transmitting power from the motor to spin the basket and turn the agitator during wash cycles.

Symptoms of a bad transmission pulley kit include:  

• The washer not spinning or agitating during cycles
• Grinding or clicking noises coming from the transmission area
• Leaks around the transmission seal or pulley area

Causes can be cracked or worn pulley components, stripped threads, or loosened nuts that no longer secure connections properly. Over time and through repeated use, normal wear and tear affect these transmission parts. 

Replacing with a genuine GE kit restores like-new operation, transferring optimized power for various cycles. This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

A small retaining nut that secures a dryer pulley in place to keep the idler or drum pulley mounted and stable. Replacing a worn or missing nut restores proper pulley alignment and helps the dryer run quietly and reliably. What it does:

• Secures the pulley to its shaft so the belt tracks correctly
• Prevents pulley wobble that can cause rubbing, squeaks or belt mis-tracking
• Helps stop excessive vibration during tumbling
• Supports normal drum rotation for even drying

• Disconnect power before servicing to avoid electrical shock
• Requires basic hand tools (socket or nut driver) and access to the dryer cabinet
• Hold the pulley/shaft steady while tightening; do not overtighten to avoid stripping threads
• Replace those parts as well for reliable operation

Fix a washer that hums but won't spin with this motor and pulley assembly. Restores proper spinning and water removal during the spin cycle.

Fix poor airflow or a fan that won't spin in your laundry center. This fan magnet assembly restores proper motor operation for consistent cooling performance.

This motor pulley and nut kit replaces a worn or damaged drive pulley on a washing machine's motor, restoring proper belt engagement. A true, undamaged pulley helps ensure reliable agitation and spin without slippage or squeal.

• Mounts on the motor shaft to drive the belt for wash and spin cycles
• Worn grooves or wobble can cause belt slippage, squealing, or a burning rubber smell
• Failure may present as slow/no spin or weak/intermittent agitation
• Restoring the pulley helps maintain correct belt tracking and reduces premature belt wear

• Unplug the appliance and disconnect water; wear gloves and ensure stable access to the motor
• Remove the belt, hold the motor shaft, then remove the old nut and pulley
• Clean the motor shaft; seat the new pulley fully and install the new nut, tightening securely
• Reinstall and align the belt; rotate by hand to verify tracking before reassembly and testing

This is a flat rubber drive belt designed for the washer section of a stacked laundry center. It connects the motor to the washer's transmission or drum to enable the wash and spin cycles. Replace this belt if the washer drum does not agitate or spin, you hear the motor running but nothing moves, or the belt appears cracked, stretched, or broken.

Fix washer basket wobbling or spinning issues with this hub. Common repair for laundry centers when clothes don't spin dry. Moderate DIY repair.

Hub nut secures the washer drum hub assembly in your laundry center. Replace if the nut is stripped, loose, or missing to properly mount the drum hub.

A replacement motor bracket that secures the motor assembly in place and maintains proper alignment for reliable operation. Restores stable motor mounting to reduce vibration and prevent misalignment-related issues. What it does:

• Holds the motor securely in the appliance chassis to maintain correct alignment
• Dampens movement and helps reduce vibration and noise from a loose motor
• Prevents motor shift that can cause belt mis-tracking or rubbing
• Supports consistent motor-to-drive engagement for reliable performance

• One motor bracket

• Disconnect power (and gas if applicable) before servicing to avoid shock or injury
• Use appropriate tools and replacement fasteners; tighten to OEM torque where specified
• Inspect surrounding mounts, fasteners and the motor for wear while replacing the bracket

Hardware kit for laundry centers includes mounting screws, brackets, and retainers to secure internal panels and components. Replace if missing or stripped.

Fix a washer that won't spin or stops after a few seconds. This speed sensor regulates wash basket rotation for proper cleaning. Moderate difficulty repair.