Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This replacement part is a mandrel cover. It is a genuine replacement part made by Husqvarna. This cover is connected to the lawnmower so that it can protect the parts inside the machine. This also helps in keeping the user safe as it covers the things underneath that can be harmful. This cover is made of durable plastic. A new mandrel cover might be needed if the current one is damaged in any way including being dented or cracked. It is common that the sides of the mower are exposed to rough debris such as gravel or rocks and can become damaged over time. If the cover is unable to stay attached to the lawnmower, be sure to replace it immediately. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure a proper fit.
This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.
This right hand mandrel cover is a genuine Husqvarna part, sold individually. This right hand mandrel cover can be used as a replacement part in a lawn mower. The purpose of the right hand mandrel cover in a lawn mower is to house and protect the mandrel assembly, which rotates the blades of the lawn mower during typical operation.If the right hand mandrel cover is dented, cracked, warped, eroded, or otherwise damaged to the point of exposing the mandrel assembly, the right hand mandrel cover should be removed and replaced by this genuine OEM replacement part in order to continue safe use of the lawn mower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. right hand mandrel cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.
This part is a replacement suspension arm. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective suspension arm in a variety of lawn tractor models.The suspension arm makes the tractor more comfortable and easier to drive, as it absorbs impact and vibration when driving over rough or unterrain. If the suspension arm is worn, snapped, or otherwise defective, it should be immediately replaced. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this suspension arm, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this suspension arm is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.
This high lift blade is a type of lawnmower blade. Compared to other blades for mowers, its ends have deeper curves. This unique and distinct feature makes the blade more versatile. When you cut the grass, the deeper curved edges will eject the clippings to the bagger. A high lift blade features large wind wings that contribute to airflow. When there is an increase in air circulation, this means you can prevent grass from clogging and accumulating, especially when cutting wet and tall grass. Continuously using a high lift blade will dull its edges, which lowers its cutting efficiency. A broken or dull blade can result in unevenly cut grass. When this happens, a replacement blade should always be within reach. For a worry-free installation, be sure to have a wooden block and socket wrench. This original Husqvarna blade works with mower models from Ariens, Dixon, Craftsman, and Husqvarna. It will also work with other mowers with 46 decks. This brand-new high lift blade is sold-individually. Bolts and washers are sold separately.
This part is a replacement hex head screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced screw on outdoor power equipment, although this screw is primarily intended for use with lawn tractors.Screws are a standard piece of hardware with multiple different uses. They are essential for holding together equipment components but can easily become lost, stripped, corroded, or otherwise damaged. In this case, screws will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex head screw, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex head screw is suitable for use on several models of small engine outdoor power equipment and lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.
The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly. This part fixes the following symptoms:
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.
The mandrel pulley or spindle pulley is a metal part that spins the blades of a riding mower as it is turned with a belt. Though quite durable, on occasion, something happens to dent or warp the pulley housing, interfering with the turning of the blades and creating a dangerous situation. Once you have found a stationary place for the mower and made certain it cannot be started, drop the mower housing by removing the locking pins and arms. Next, you’ll want to disconnect the spring from the clutch rod. This will allow you to roll the mowing belt off the engine pulley. Remove the deck from beneath the tractor. Using a lubricant, remove the flange nut from the pulley assembly. Next, take the top flange nut off the pulley with a socket wrench. Penetrating oil may be required. Take the pulley from the spindle. Reassembling the unit is a matter of walking back through the disassembly process. This spindle pulley is an OEM replacement manufactured by Husqvarna. In addition, it is compatible with many Craftsmen mowers as well. This OEM part is individually packaged and sold.
This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.
This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.
This is a replacement belt keeper that is designed for use with select outdoor equipment engines. This belt keeper is designed to secure the belt inside of the engine and allow for safe operation of the unit. Over time, this light piece of metal framing can become damaged or worn, causing it to fail to secure the belt as it should. Replacement is the best way to restore the optimal function of the machine and it is important to use genuine parts. This OEM belt keeper replacement is manufactured by Husqvarna and meets exact standards as an OEM replacement. The unit is compatible with select models from this brand, as well as those from AYP, Poulan and Poulan Pro, Weed Eater, Sears/Craftsman, and Roper. The keeper is sold individually and does not come with the hardware required to secure the part. If hardware needs replaced, it will require a separate purchase. Be sure to wear gloves whenever performing repairs on lawn and garden equipment. When working in the engine, especially, it is important to allow the engine to cool and work in a well-ventilated area for safety.
This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This torsion spring retainer is a genuine Husqvarna part, sold individually. This torsion spring retainer can be used as a replacement part in a lawn mower. This part secures and stabilizes parts within the mower. If the torsion spring retainer loses its basic functionality and cannot be easily repaired, the torsion spring retainer should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This torsion spring retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Ariens.
The idler arm is a genuine replacement part that is supplied from the manufacturer. This part is used on riding lawn mowers to help manage the shifting of the gears on the unit. The idler arm is attached to the mower housing and the belt guard and is used to engage the idle function. This durable metal arm is subject to repetitive motion and constant vibrations, which can cause it to crack or break over time. Impact damage could also occur. If the idler arm fails, the engine will not be able to work properly until it is replaced. A genuine OEM replacement like this part will resolve the issue. This OEM idler arm is manufactured by Husqvarna and can be used in select machines from Poulan, Husqvarna, Jonsered, and Weed Eater. The arm is sold as an individual part. Hardware and additional components will require an additional purchase. Replacing the idler arm will require a socket set and a screwdriver in most cases. It is a fairly simple job. Allow the engine to cool and work in a well-ventilated area when performing this repair.
This part is a replacement blade brake arm. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached blade brake arm in lawn tractors.The blade brake arm is what enables the user to stop the tractor blades from rotating when pressure is applied. This part is essential to safe and effective equipment functionality and thus should be replaced if dented, bent, snapped, or faulty in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this blade brake arm, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade brake arm can be used with different models of lawn tractors that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.
The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.
This linkage brake is a genuine Husqvarna part, sold individually. This linkage brake can be used as a replacement part in a lawnmower. The purpose of the linkage brake in a lawnmower is to affix in the space between the idler arm and the mower arm brake such that the brake arm can facilitate the ceasing of rotation of the blades.The linkage brake could suffer damage from general wear and tear over long-term use or as the result of a collision with a hard object such as a rock or a curb. If this occurs, the linkage brake should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This linkage brake is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.
The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.
This is a genuine OEM clutch assembly sourced directly from the manufacturer; it is used in lawn mowers and lawn tractors to engage the blades. When the gear lever is pulled, the clutch engages. This causes the pulley wheel to spring out and tighten the blades against the turning drive shaft pulley, which then causes the blades to spin. If the clutch assembly is not working correctly, the blades will not move to cut the lawn. If the blades will not engage or if they are stuck and won't disengage, the clutch assembly should be replaced. This can occur if the clutch assembly overheats. Excessive use and normal wear and tear can also be the cause of a bad clutch. Before working on the clutch assembly, make sure the engine has had time to cool off to prevent burns. Remove the fuel from the fuel tank and fuel lines. Remove the spark plug to prevent accidental engine starting. Park the machine on a flat surface and chock the wheels to prevent rolling. Remove and replace the clutch assembly, then reinstall all parts and fuel. Check the clutch after replacement to ensure it is working properly.This clutch assembly is sold as an individual unit. It is compatible with lawn tractors and tractors manufactured by Craftsman, Husqvarna, and Poulan.
This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.
The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.
This left-hand engine belt keeper is designed to be a replacement for riding mowers and lawn tractors. The purpose of the belt keeper is to stabilize the belt. This will help to reduce the amount of friction on the belt. If this part is damaged or missing, it could cause problems with the belt including premature wear and tear. In some cases, the mower will not function properly.The part is made from durable metal, but there is still a chance that it could break or become worn and corroded over time. If the owner notices any signs of damage, the belt keeper should be replaced right away to ensure the mower continues to function properly.The engine belt keeper can be used for many models of machines from Husqvarna, Poulan, Weed Eater, and Jonsered. The high-quality metal replacement piece is sold individually. It is a genuine OEM part that has been sourced directly from the manufacturer.
This part is a belt keeper. The belt keeper guides the path of a tractor belt that is between pulleys. The belt that these belt keepers hold is what transfers power to another pulley in the system, making the equipment run. A new belt keeper may be needed if the belt keeper is physically broken or damaged. If the belt routinely comes off of the belt keepers, this could be a sign that the belt keepers need to be replaced. Use caution when working with these parts. The operator should only perform care and maintenance on the machine when it is powered off. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. This belt keeper is compatible with lawn tractors manufactured by Husqvarna and Craftsman.
This flat idler pulley is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A flat idler pulley is used in conjunction with the belt to transfer power from the engine to the machine, specifically designed for use with outdoor lawn and garden power equipment such as lawn mowers. It is compatible with mowers by brands such as Husqvarna, Poulan, and Weed Eater.The flat idler pulley part is crucial for the proper functioning of the lawn mower. The purpose of the the flat idler pulley part is to connect to the idler bracket. When this process functions properly, the flat idler pulley will then apply tension to the v-belt. The replacement or repair process of the flat idler pulley should be straightforward, although the user replacing the part should plan on using a wrench. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This flat idler pulley is made out of metal.
This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.
This is a genuine OEM replacement clutch cable for a lawn tractor with a mechanical clutch system. A mechanical clutch is a simple transmission system engaged when the operator pushes a lever. The clutch cable transfers energy from the motor and either engages or disengages the mower blade. The clutch is essentially a brake for the mower blade. This allows the operator to stop mowing without having to turn off their appliance. The clutch cable can tense up in colder climates and snap, or alternatively, it can lose tension over time and no longer provide enough force to engage the clutch. Should this happen, the operator will not be able to turn the mower blade off or on, depending on what position the clutch is in. To replace the clutch cable, detach the lower deck from the lawn mower and disassemble the old cable with a pair of pliers. Replace with a new part and reassemble the lower deck. This repair is easy and straightforward but be sure to not lose the clips that hold the lower deck in place. This replacement clutch cable is compatible with lawn mowers made by Husqvarna, Poulan, and Jonsered. It comes sourced from its original manufacturer and ships individually.
This stud fastener is a genuine Husqvarna part, sold individually. This stud fastener can be used as a replacement part for a lawn mower. The purpose of a stud fastener is to fasten components to one another with a threaded bar that attaches at its ends to make a bolt.The stud fasteners within a lawn mower might have to be replaced if one or more of them are lost, misplaced, or worn out over time. This could occur if the stud fasteners fall out of the appliance, in which case they should be immediately replaced by this genuine OEM replacement part, or if they are stripped over time from general wear and tear from long-term use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This stud fastener is compatible with the following outdoor appliance brands: Husqvarna and Poulan.
This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.
This part is a center front baffle. A baffle is connected beneath the lawnmower deck to help with the airflow. The baffle helps direct the grass clippings out to the discharge chute, into the grass clipping bag, or out as mulch. A new center front baffle may be needed if the original has been broken, cracked, or damaged in any way. The center front baffle is most commonly damaged by impact when it has run into something, such as a stump or concrete. The lawnmower operator may notice that the grass clippings are clumping up or not properly coming out of the discharge chute.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This center front baffle is compatible with lawnmowers and riding lawn tractors manufactured by Husqvarna, Poulan, and Jonsered.
The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.