Parts for Poulan 96042017000: Mower Deck Parts

This replacement part is a mandrel cover. It is a genuine replacement part made by Husqvarna. This cover is connected to the lawnmower so that it can protect the parts inside the machine. This also helps in keeping the user safe as it covers the things underneath that can be harmful. This cover is made of durable plastic. A new mandrel cover might be needed if the current one is damaged in any way including being dented or cracked. It is common that the sides of the mower are exposed to rough debris such as gravel or rocks and can become damaged over time. If the cover is unable to stay attached to the lawnmower, be sure to replace it immediately. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure a proper fit.

This right hand mandrel cover is a genuine Husqvarna part, sold individually. This right hand mandrel cover can be used as a replacement part in a lawn mower. The purpose of the right hand mandrel cover in a lawn mower is to house and protect the mandrel assembly, which rotates the blades of the lawn mower during typical operation.If the right hand mandrel cover is dented, cracked, warped, eroded, or otherwise damaged to the point of exposing the mandrel assembly, the right hand mandrel cover should be removed and replaced by this genuine OEM replacement part in order to continue safe use of the lawn mower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. right hand mandrel cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This is a belt guard for use with certain models of riding mower and lawn tractor. The belt guard is situated between the washer and the arm idler. The purpose of the guard is to help guide the belt so that it works properly. They could also help to protect the belts from damage and work as a safety feature.The belt guard is made from durable metal and it is made to last. However, owners might find that they eventually need to replace the piece if it breaks or has other damage. If the belt guard has been bent or if it is corroding, it will not do its job properly. Replacing the guard will require a socket set, wrench set, and a set of pliers.The belt guard can serve as a replacement for many models of riding mowers and tractors from Husqvarna, Weed Eater, Ryobi, Poulan, and Jonsered. The piece is sold individually, and it is an authentic OEM replacement part sourced from the manufacturer.

This part is a replacement blade brake arm. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached blade brake arm in lawn tractors.The blade brake arm is what enables the user to stop the tractor blades from rotating when pressure is applied. This part is essential to safe and effective equipment functionality and thus should be replaced if dented, bent, snapped, or faulty in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this blade brake arm, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade brake arm can be used with different models of lawn tractors that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This gauge wheel is a genuine Husqvarna part, sold individually. This gauge wheel can be used as a replacement part in a lawn mower. The purpose of a gauge wheel in a lawn mower is to facilitate the depth to which the burrowing mechanism of the lawn mower will set so that various levels of depth can be reached within the soil on the lawn.The gauge wheel of a lawn mower might have to be replaced if it suffers damage that precludes it from setting the correct depth for boring. The gauge wheel could be dented, punctured, torn, ripped, eroded, or otherwise damaged in a way that prevents it from serving its function, in which case the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This gauge wheel is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This left-hand engine belt keeper is designed to be a replacement for riding mowers and lawn tractors. The purpose of the belt keeper is to stabilize the belt. This will help to reduce the amount of friction on the belt. If this part is damaged or missing, it could cause problems with the belt including premature wear and tear. In some cases, the mower will not function properly.The part is made from durable metal, but there is still a chance that it could break or become worn and corroded over time. If the owner notices any signs of damage, the belt keeper should be replaced right away to ensure the mower continues to function properly.The engine belt keeper can be used for many models of machines from Husqvarna, Poulan, Weed Eater, and Jonsered. The high-quality metal replacement piece is sold individually. It is a genuine OEM part that has been sourced directly from the manufacturer.

This part is a belt keeper. The belt keeper guides the path of a tractor belt that is between pulleys. The belt that these belt keepers hold is what transfers power to another pulley in the system, making the equipment run. A new belt keeper may be needed if the belt keeper is physically broken or damaged. If the belt routinely comes off of the belt keepers, this could be a sign that the belt keepers need to be replaced. Use caution when working with these parts. The operator should only perform care and maintenance on the machine when it is powered off. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. This belt keeper is compatible with lawn tractors manufactured by Husqvarna and Craftsman.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This is a genuine OEM replacement clutch cable for a lawn tractor with a mechanical clutch system. A mechanical clutch is a simple transmission system engaged when the operator pushes a lever. The clutch cable transfers energy from the motor and either engages or disengages the mower blade. The clutch is essentially a brake for the mower blade. This allows the operator to stop mowing without having to turn off their appliance. The clutch cable can tense up in colder climates and snap, or alternatively, it can lose tension over time and no longer provide enough force to engage the clutch. Should this happen, the operator will not be able to turn the mower blade off or on, depending on what position the clutch is in. To replace the clutch cable, detach the lower deck from the lawn mower and disassemble the old cable with a pair of pliers. Replace with a new part and reassemble the lower deck. This repair is easy and straightforward but be sure to not lose the clips that hold the lower deck in place. This replacement clutch cable is compatible with lawn mowers made by Husqvarna, Poulan, and Jonsered. It comes sourced from its original manufacturer and ships individually.

This part is a center front baffle. A baffle is connected beneath the lawnmower deck to help with the airflow. The baffle helps direct the grass clippings out to the discharge chute, into the grass clipping bag, or out as mulch. A new center front baffle may be needed if the original has been broken, cracked, or damaged in any way. The center front baffle is most commonly damaged by impact when it has run into something, such as a stump or concrete. The lawnmower operator may notice that the grass clippings are clumping up or not properly coming out of the discharge chute.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This center front baffle is compatible with lawnmowers and riding lawn tractors manufactured by Husqvarna, Poulan, and Jonsered.

This buttonhead screw is a genuine Husqvarna part. This buttonhead screw is a genuine OEM sourced part from the manufacturer. Users will need an Allen wrench or a hex key to install this buttonhead screw. A buttonhead screw is a type of cap screw that is characterized by its hexagonal drive hole and cylindrical head.Since it is a screw, it is likely to resemble other products, so users should exercise caution not to mix it up with others. It is important to use well-fitting, specially designed screws on appliances such as lawn mowers and tractors.It is compatible with the Jonsered lawn tractor YT46-96043019700, the Jonsered Z46R lawn mower zero turn consumer, and the Jonsered Z46R-967327801 lawn mower zero turn consumer. In addition, it can be used with the Poulan tractors model numbers 96042016700, 96042016900, and 96042017000, as well as a Husqvarna tractor and two models of Husqvarna zero turn mowers. This buttonhead screw may also be compatible with products lawn mowers by AYP, Craftsman, McCulloch, Poulan/Poulan Pro, RedMax, and Weed Eater.

This replacement part is a reinforcer plate. This is a genuine replacement part made by Husqvarna. This part commonly attaches to the deck of the lawnmower. The reinforcer plate helps ensure that parts are completely secure and properly attached during use. A new reinforcer plate might be needed if the user notices that parts are not attached properly. If parts of the lawnmower are coming loose it is best to replace the reinforcer plate so that everything is secure. This repair should be simple and only require common household tools such as a screwdriver.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.