Mtd Lawn Mower Parts

Control cable for lawn mowers. Connects handle controls to engine or drive system. Replace if frayed, kinked, broken, or won't engage properly.

Drive control cable engages the gear case on self-propelled lawn mowers. Replace if cable is frayed, broken, or stretched causing loss of drive function.

Can't control mower speed or engine won't maintain RPM? Replace the throttle cable. Easy 15-minute repair restores smooth speed control on your mower.

This is a throttle body intended for use with lawnmowers and tractors. The throttle body is attached to the control cable, the throttle control wire, and the throttle lever. It can be damaged or wear out with regular use. Signs that the throttle body is failing or going bad include a very low idle or poor idle. Stalling of the machine when stopping the device is another indicator that the throttle body is bad. When this happens, a new throttle body must be installed.Replacing a throttle body is simple. It requires a set of pliers, a wrench, and a screwdriver. Always wear gloves when working on a throttle body repair. Make sure to allow time for the machine to cool completely before beginning the repair.This throttle bottle is an authentic OEM part. It is supplied directly from the manufacturer. The throttle body is made of high-quality, durable plastic material. It is sold as an individual unit. The throttle body is compatible with Huskee, MTD, Yard Machines, Yard-Man, and Cub Cadet brands. It can be installed in various machines, including push-behind lawn mowers, lawn tractors, and other lawn equipment."

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

Control cable for gas walk-behind mowers. Installs to operate speed control or drive engagement. Replace if cable is frayed, broken, or stretched.

Control cable for walk-behind mowers. Connects control handle to blade brake system. Replace if cable is damaged, frayed, broken, or won't release brake.

Ratchet wheel for lawn mowers. Installs in the drive mechanism to enable continuous motion in one direction. Replace if cracked, worn, or damaged.

Thumb screw that secures the air cleaner assembly on lawn mower and small engines. Replace if damaged, stripped, or missing due to vibration.

Rope won't retract or gets stuck when pulling? This recoil starter spring restores smooth pull-and-retract action on walk-behind mowers and tillers.

Replacement muffler stud assembly for lawn mowers, tillers, and small engines. Secures the muffler to the engine block. Replace if broken or missing.

Mower won't start or cuts out during use? A faulty ignition coil prevents spark to the engine. This part restores reliable starting in 30-45 minutes.

Air cleaner housing shields your engine from dirt and debris. Replace if cracked or damaged to maintain proper filtration. Verify fit with your model number.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

Fuel filter for small engines on snowblowers, tillers, and lawn equipment. Replace annually or if engine runs rough to ensure clean fuel flow. Verify fit with your model number.