Mtd Pro Trimmer

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Secures the cutting head base on your string trimmer. Replace if cracked, worn, or loose to maintain proper trimmer operation. Confirm fit with model.

This is a genuine replacement flywheel spacer that is used on select outdoor lawn and garden engines. The flywheel spacer is used to connect the flywheel in line trimmers and provide adequate spacing so that the line can rotate properly to provide the trimming required. This spacer is made of durable metal but it can be damaged or become worn over time. If it is not functioning properly, the part will need to be replaced so that the unit is safe to use. This part can provide an exact fit for compatible models. This genuine OEM flywheel spacer is manufactured by MTD. It can be used in units from the brand, as well as compatible units from Troy-Bilt, Cub Cadet, and Craftsman. The spacer is made of durable metal and sold individually. Other parts will require an additional purchase. The line trimmer should be disconnected from power and the spark plug should be disconnected before doing any repairs. Wear gloves for hand protection whenever working on internal components on line trimmers and other outdoor power equipment.

Throttle housing and trigger assembly for gas line trimmers. Includes plastic housing, trigger, and spring. Replace if cracked, broken, or worn out.

24.932" boom assembly for gas line trimmers. Includes internal drive shaft. Replace if boom tube is bent, cracked, or damaged from impact or wear.

17-inch guard and blade assembly for gas line trimmers. Protects operator and controls cutting diameter. Replace if cracked, broken, or damaged.

Replace a broken recoil spring when your gas trimmer, edger, or blower won't pull-start or the cord won't retract. Simple DIY repair in under 30 minutes.

Fastening nut for tillers, trimmers, blowers, and edgers. Secures components by working with bolts. Replace if stripped, corroded, or missing.

Upper housing assembly with flexible shaft for gas line trimmers. Installs between power head and lower boom. Replace if housing is cracked or damaged.

This is a small return spring that attaches to the throttle trigger on a line trimmer. It provides the tension needed to return the trigger to the idle position when released, controlling engine speed. Replace this spring if the throttle trigger feels loose, does not spring back, or if the engine stays at high RPM when the trigger is released.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

Flywheel assembly for tillers and outdoor power equipment. Replaces cracked, damaged, or worn flywheels that affect engine timing and cooling fan operation.

This fuel tank support is a genuine MTD part, sold individually. A fuel tank support can be used as a replacement part for outdoor appliances including tillers, string trimmers, leaf blowers, and edgers. This genuine OEM part is made out of high quality, durable materials that are specifically designed to last and hold up to possible general wear and tear over long-term usage.The fuel tank support might be subject to various forms of damage that can reduce or negate the efficacy of its function. If this occurs, the fuel tank support should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued usage of the appliance over its typical lifespan.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank support is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

This replacement part is an ignition coil. This is a genuine replacement part made by MTD. This part is commonly found in line trimmers or edgers. This part ensures that the trimmer is able to start and stop according to the user's needs.A new ignition coil might be needed if the starting and stopping functions in the line trimmer are not working as effectively as during prior uses. This can be due to a faulty ignition coil, and if this is the case, it should be replaced. Be sure the engine is completely turned off before attempting to replace this part. Refer to the proper user manual for more information on this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.

Blade guard assembly for line trimmers. Protects operator from debris and rotating components. Replace if cracked, broken, or missing for safe operation.