Mtd Pro Trimmer

24.932" boom assembly for gas line trimmers. Includes internal drive shaft. Replace if boom tube is bent, cracked, or damaged from impact or wear.

Reel index slider for gas line trimmers. Installs on the trimmer head to control string line release. Replace if cracked, broken, or missing.

17-inch guard and blade assembly for gas line trimmers. Protects operator and controls cutting diameter. Replace if cracked, broken, or damaged.

Replace a broken recoil spring when your gas trimmer, edger, or blower won't pull-start or the cord won't retract. Simple DIY repair in under 30 minutes.

Fastening nut for tillers, trimmers, blowers, and edgers. Secures components by working with bolts. Replace if stripped, corroded, or missing.

Upper housing assembly with flexible shaft for gas line trimmers. Installs between power head and lower boom. Replace if housing is cracked or damaged.

Trigger spring for lawn tractors and gas-powered outdoor equipment. Replaces broken, worn, or missing springs that affect trigger operation.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

Flywheel assembly for tillers and outdoor power equipment. Replaces cracked, damaged, or worn flywheels that affect engine timing and cooling fan operation.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

Protects the air filter from debris and damage. Replace if cracked, broken, or missing to maintain proper engine performance. Verify fit with your model number.

This part is a replacement lead wire kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective lead wire in line trimmers.Lead wires are critical for the line trimmer to work as they connect the electrical system required to power the equipment. Wires can become stripped, broken, stretched, or otherwise defective over time and thus will require replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Take caution when working with electrical wiring. For more accurate information on how and where to install these lead wires, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. These lead wires can be used with different models of line trimmers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This replacement part is an ignition coil. This is a genuine replacement part made by MTD. This part is commonly found in line trimmers or edgers. This part ensures that the trimmer is able to start and stop according to the user's needs.A new ignition coil might be needed if the starting and stopping functions in the line trimmer are not working as effectively as during prior uses. This can be due to a faulty ignition coil, and if this is the case, it should be replaced. Be sure the engine is completely turned off before attempting to replace this part. Refer to the proper user manual for more information on this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.