Murray Bearing Parts

This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This is a replacement part for select riding mowers designed to ensure smooth rotation for years of use. This part is circular and tapers off into a hexagonal shape to support rotating shafts that create friction inside of machinery. Rotating parts are almost a given in most machinery like riding mowers, so the hex flange bearing provides support in multiple ways to parts such as wheels, rotors, and gears.The hex flange bearing serves two fundamental roles to make machinery run efficiently. For starters, friction will inevitably occur in rotating shafts, so bearings reduce the amount of friction and related wear and tear. The second function of this part is protecting the rotating from damage due to pressure created during operation.This genuine OEM sourced replacement part is intended to be used for lawn tractors from MTD and other yard machines. This part is compatible with manufacturers including Yard Machines, Bolens, Yard Man, Troy-Bilt, Cub Cadet, and Husky. A wrench may be used for an easier replacement installation. This item is available for purchase individually.

The sealed ball bearings are used as a means to limit the amount of friction that occurs between a fixed part of the assembly and a rotating shaft. They can be used for numerous applications in lawn and garden equipment. The ball bearings are used in various locations of different types of machines, so the issues that could crop up will vary. Typically, bad ball bearings will create knocking sounds in the engine, or parts in the engine could be difficult to turn. When the ball bearings are no longer sealed or not functioning properly, they should be replaced. This genuine OEM replacement ball bearing is sold individually. The ball bearing works with many models of lawn mowers, snowblowers, edgers, wood chippers, and tillers. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Buyers should always ensure they are buying the correct parts for their make and model.

This part is a replacement hex flange bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a detached, defective, or damaged hex flange bearing in a variety of lawn tractor models. This part provides support for the lawn tractor shaft and also enables it to rotate without creating too much friction. This is a high wear and tear part and may require replacement with age or regular equipment use. A wrench set and screwdriver will be needed to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this hex flange bearing, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this hex flange bearing is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, Yard Man, and Cub Cadet. This is a genuine part made of high-quality, durable metal and is sold individually.

This bushing, also known as a plain bushing, plain bearing, or sleeve bearing, is used in lawn and garden equipment to prevent excess friction between two items that slide against each other. The bushing is used to secure the flange bearing on lawn mowers and other equipment. Bushings are also located on the wheels of lawn mowers. Sometimes, the bushings can get worn out or become damaged through normal use. When this occurs, the part will need to be replaced.If the wheel bushing needs to be replaced, the equipment should be raised and placed on a stable surface. The cap on the wheels can be removed using a screwdriver. Find the clip on the axle and remove it using a flat head screwdriver and a hammer. The wheel can then be removed and the wheel bushing can be taken out of them. Insert the new part into the center wheel hole and secure using a hammer.This gas line bushing is a genuine OEM replacement part directly sourced from the manufacturer. It comes as an individual part. This bushing is made to fit lawn tractors, generators, tillers, snowblowers, log splitters, and lawn mowers manufactured by Craftsman, Murray, Yard-Man, MasterCut MTD, Troy-Bilt, and Cub Cadet.

This bearing cup is a genuine MTD part, sold individually. This bearing cup can be used as a replacement part in a lawn mower. The purpose of the bearing cup in a lawn mower is to work in conjunction with a cone to provide stability in a bearing so that the machinery can withstand radial and axial load during the operation of the appliance.The bearing cup in a lawn mower might have to be replaced if the component exhibits signs of damage. If the bearing cup has been compromised in the form of puncturing, scraping, denting, cracking, warping, or eroding at some point within the lifespan of the lawn mower, the component should be removed and replaced by this genuine OEM replacement part in order to ensure proper functionality and safe use of the appliance as a whole.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This bearing cup is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Yard Man, Huskee, Bolens, and MasterCut.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This part is a replacement sphere bearing assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a worn out, damaged, or defective sphere bearing in a variety of outdoor power equipment.Sphere bearings have a variety of uses. They are particularly useful for equipment with a high load capacity that also requires high tolerance and self-aligning ability. They can be found in a wheel assembly, transmissions, or other machinery parts. Sphere bearings are subject to significant wear and tear, requiring replacement. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this sphere bearing assembly, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this sphere bearing assembly is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Bolens, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

The ball bearing is a standard hardware part with multiple applications on various lawn and garden machines. The bearing is typically used in a position where it can reduce friction between two rotating components. This exposes them to constant wear, heat, vibration, friction, and pressure, causing them to wear out and become a part of routine maintenance for many machines. In the event that ball bearings fail, they will typically affect the operation of whatever they are attached to, or they could create squealing noises or other sounds from the machine. A prompt replacement with this genuine ball bearing will prevent the risk of further damage. This genuine OEM replacement part is manufactured by Murray and designed to work with more than 150 snowblowers and tractors from Snapper, Simplicity, and Murray. Buyers should check their owner's manual for the location and application of this ball bearing. This is made of durable metal and sold individually. Those who need several bearings will have to buy multiple quantities. Pliers and a screwdriver are required to complete the repair.