Murray Cap, Lid & Cover

This genuine air cleaner cover assembly protects the air filter cleaner on select string trimmers from the elements and exposure to potential debris and damage. This allows the filter to work properly and avoid serious clogs or damage in the meantime. The cover consists of a durable plastic housing, but it can become cracked or damaged over time or due to an incident. In the event that the air cover is broken, it should be replaced right away to prevent further damage or cause issues with the air filter. This genuine OEM air cleaner cover is manufactured by MTD to exact standards. It offers compatibility with several string trimmers from MTD, as well as those from Yard Man, Bolens, Yard Machines, Troy-Bilt, and Cub Cadet. This kit includes the plastic air filter cover, the plastic insulator, and two metal bolts that attach the cover to the air filter base assembly on the engine. It is recommended to replace the air cleaner gasket at the same time, which will require a separate purchase. Always allow the engine to cool and wear gloves when doing any engine work.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This replacement fuel cap is used with many types of gas-powered lawn and garden tools. The purpose of the fuel cap is to help keep dirt and debris out of the fuel tank. It also helps to reduce extra air from getting into the tank.Debris or air in the fuel tank can make it difficult to start a gas-powered machine. Dirt can cause damage to the engine, as well. The replacement fuel cap is a simple way to ensure these types of issues do not occur. Most fuel caps can last for many years without needing a replacement. However, over time, they could become damaged or worn out from too much use. The old cap can be removed and the new cap can be screwed onto the fuel tank to replace it. No tools are needed.The fuel cap can be used with trimmers and blowers from a range of manufacturers including Yard Machine, Cub Cadet, MTD, Craftsman, Murray, Remington, and Troy-Bilt. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part for a lawn tractor. This fuel cap provides covering for the fuel tank and fuel line of the lawn tractor so that debris cannot enter through the fuel line and damage the engine.The fuel cap might have to be replaced at some point within the standard lifespan of the appliance if it cannot serve its function of protecting the engine from damage. This could occur if the fuel cap goes missing or if it is damaged in the form of punctures, tears, rips, scrapes, or erosion so that external materials can pass directly through the cap and into the fuel line. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Man, and Craftsman.

MTD air cleaner cover assemblies are located outside of air cleaners found in MTD gas string trimmers. The cover is used to secure the air filter in place. It also is used to protect the internal parts from debris, including the carburetor. The air cleaner cover may need replacing after damage in situations such as the trimmers being dropped. The original cover could also become lost after routine use and therefore ineffective at keeping out dirt, dust, and other particles. These conditions require a replacement to continue the proper protection of the air cleaner and subsequently the engine.Locate the air cleaner cover by determining where the air filter is on the MTD lawn trimming machine. Make sure the tool is cool. Wear gloves for safety. Remove the two screws holding on the existing air cleaner cover if there is one in place. Remove the air cleaner and install the new part.The genuine OEM air cleaner cover assembly replacement part is supplied directly from the manufacturer. It is compatible with several different MTD lawn trimming machines. The air cleaner cover is black and includes two screws. The part is made from high-quality plastic. The air cleaner cover assembly is sold individually.

This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.