Parts for Lg WT7305CW/00: Outer Case Assy Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This outer tub cover protects the washer tub assembly and helps keep internal components free from debris while maintaining proper water containment. It's a direct-fit replacement designed to restore proper sealing and operation. What it does:

• Covers and protects the outer tub assembly from contaminants and clothing entanglement
• Helps maintain a proper water seal and containment to reduce leaks
• Supports tub alignment and helps minimize vibration-related noise
• Common replacement for visible cracks, warping, or damage that leads to leaks or rubbing noises

• Disconnect power and water supply before beginning any repair
• Drain the washer and remove panels or trim as required to access the tub area
• Handle edges carefully; use basic hand tools and keep fasteners organized for reassembly

Suspension damper reduces vibration and noise during washer spin cycles. Replace if your washer shakes excessively or makes loud banging sounds. Verify fit with your model number before ordering.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

If your washer's pulsator is loose or rattling during wash cycles, the cap may be cracked or damaged. This cap secures the pulsator for proper agitation.

Washer holder assembly that secures internal components in place. Replace if the original holder is cracked, broken, or missing to restore proper fit.

If clothes aren't getting clean or the wash cycle seems ineffective, the agitator may be worn or damaged. This replacement part restores scrubbing action.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. It replaces a worn or failed damper to restore proper air distribution and reduce temperature swings. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced temperatures
• Can cause uneven cooling or warm fresh-food compartment when faulty
• May click, stick, or fail to open/close if broken or obstructed
• Works with the refrigerator's control system to adjust airflow based on settings

• Disconnect power before beginning any service to avoid electric shock
• Handle the damper and housing carefully to avoid damage to plastic fins or linkage
• Note orientation and actuator connection before removal to ensure correct reassembly
• Test operation after reinstalling by restoring power and cycling temperature controls

Adjustable leveling leg that supports your washer and allows height adjustment. Replace if damaged, stripped, or missing to restore stability on uneven floors.

Replacement mounting bracket holder that secures internal washer components. Needed when your original bracket is cracked, broken, or missing.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

Genuine hardware washer that distributes fastener load at assembly joints. Replace if worn, cracked, or causing loose connections. Confirm fit with your model.

Replaces damaged, dented, or faded outer trim panel on your washer. Restores the clean, factory finish to the appliance front or edge for a complete look.

This knob assembly is the replacement rotary control used to select settings on the appliance. It restores a worn, cracked, or missing knob to make dialing controls easy and accurate again. What it does:

• Replaces a damaged or missing control knob so you can select cycles, temperatures, or settings
• Provides a secure grip and tactile detents for reliable user control
• Helps stop slipping or loose operation caused by worn knobs or stripped splines
• Restores the appliance's original look and usability

• Turn off and unplug the appliance (or disconnect power) before replacing the knob.
• Pull the old knob straight off the control shaft; push the new knob onto the shaft until it seats.
• If the knob does not fit, do not force it—verify spline alignment and part compatibility.

Replace your washer's inner tub assembly when cracked, damaged, or worn. This rotating drum component holds clothes during wash cycles. Restores structure.

Fix a washer with a blank display or unresponsive control panel. This power control board restores display lighting and button functions. Moderate DIY.

Fix a washer with a blank display or unresponsive control panel. This power control board restores display lighting and button functions. Moderate DIY.

Fix a washer that won't power on, has unresponsive buttons, or runs continuously when off. This main control board manages all washer functions and cycles.

Washer not draining or making groaning noises during drain cycle? This drain pump assembly removes water and debris. Check for clogs first; moderate DIY.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix intermittent washer operation with this single wire harness. Restores secure electrical connections between components for reliable performance.

Fix excessive washer vibration and loud banging during spin cycles with a new suspension assembly. Stabilizes the drum and reduces noise for smoother operation.

This drain hose directs used water from your washer to the household drain. Replace if cracked, split, leaking, or chewed through by rodents.

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

Molded trim piece that shields and supports the washer guide track assembly. Replace if cracked, broken, or missing to maintain smooth alignment.

If your washer won't start or shows a door lock error code, a faulty lid switch assembly is likely the cause. This safety switch detects proper closure.

The Bellows Assembly is an OEM part for LG washers. The bellows assembly forms a watertight seal around the pump shaft to make sure water is properly drained from the washer tub during the spin cycle.

Causes of a bad drain pump bellows assembly can include split or cracked rubber from age, leaks that develop over time due to small cracks or porous areas of the bellows.

Symptoms of a bad drain pump bellows assembly include:

• Water not fully draining from the washer tub after cycles
• Excess water left in the tub requiring additional emptying
• Drips or leaks under the washer during or after draining
• Standing water or mold growth inside the pump housing

This LG part is also compatible with some Kenmore models.

Secures internal components to the washer frame. Replace if cracked, bent, or broken to restore proper alignment and stop rattling or sagging parts.

Secures internal washer components in proper alignment. Replace this mounting bracket if cracked, rusted, broken, or missing to restore stability.

Dispenses detergent, softener, and bleach during wash cycles. Replace if cracked, clogged, or disintegrated. Confirm fit with your model number.

Fix poor cleaning or uneven water spray in your washer with this tub spray nozzle assembly. Directs water during wash cycles. Moderate DIY repair.

Washer won't switch cycles or hums during agitation? The clutch and housing assembly connects the motor to enable spin cycles. Moderately difficult repair.

Fix a washer that won't fill, leaks underneath, or drips constantly with this water inlet valve. Controls water flow into the drum. Easy DIY repair.

Leaking water behind your washer? A cracked inlet hose is often the culprit. This hose channels water from your supply line into the machine during fill.

Fixes washer drum not spinning or spinning intermittently. The stator assembly powers the motor that rotates the wash basket. Moderate difficulty repair.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Fix E6 error codes and loud ratcheting sounds during wash or spin cycles. This washer motor assembly drives drum rotation for proper cleaning.

Secures and organizes internal washer components in proper position. Replace this parts assembly when worn, damaged, or broken to restore stability.

Fix washer control issues, display errors, or cycle failures with this wire harness. Connects electronic controls to motors and sensors. Moderate DIY repair.

Secures brackets, panels, and fasteners inside your washer. Replace this nut if worn, missing, or stripped to restore tight connections and eliminate rattling.

Small flat hardware washer that sits under screws or bolts on washer assemblies. Distributes load and protects surfaces. Replace if missing or worn.

Snap-on trim cap that conceals fasteners and openings on your washer. Replace if cracked, broken, or missing to restore finished appearance.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.