Parts for Lg WT7405CW/00: Outer Case Assy Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Suspension damper reduces vibration and noise during washer spin cycles. Replace if your washer shakes excessively or makes loud banging sounds. Verify fit with your model number before ordering.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

If your washer's pulsator is loose or rattling during wash cycles, the cap may be cracked or damaged. This cap secures the pulsator for proper agitation.

If clothes aren't getting clean or the wash cycle seems ineffective, the agitator may be worn or damaged. This replacement part restores scrubbing action.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This is a small rubber pad that sits beneath the leveling leg of a washing machine. It helps absorb vibration, reduce noise, and prevent the machine from sliding on the floor during operation. Replace this pad if it is cracked, worn, or missing, which can cause excessive vibration, walking, or noise during the spin cycle.

Adjustable leveling leg that supports your washer and allows height adjustment. Replace if damaged, stripped, or missing to restore stability on uneven floors.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

Genuine hardware washer that distributes fastener load at assembly joints. Replace if worn, cracked, or causing loose connections. Confirm fit with your model.

This knob assembly is the replacement rotary control used to select settings on the appliance. It restores a worn, cracked, or missing knob to make dialing controls easy and accurate again. What it does:

• Replaces a damaged or missing control knob so you can select cycles, temperatures, or settings
• Provides a secure grip and tactile detents for reliable user control
• Helps stop slipping or loose operation caused by worn knobs or stripped splines
• Restores the appliance's original look and usability

• Turn off and unplug the appliance (or disconnect power) before replacing the knob.
• Pull the old knob straight off the control shaft; push the new knob onto the shaft until it seats.
• If the knob does not fit, do not force it—verify spline alignment and part compatibility.

Fix blank or unresponsive washer displays with this power control board assembly. Restores front panel operation and touch controls. Moderate DIY repair.

Replaces damaged, cracked, or missing outer housing panel on your washer. Restores proper enclosure and appearance while shielding internal components.

Fix a washer that won't start, stops mid-cycle, or has no display with a new main power control board. This repair restores electrical functions.

Washer not draining or making groaning noises during drain cycle? This drain pump assembly removes water and debris. Check for clogs first; moderate DIY.

Fix intermittent washer operation with this single wire harness. Restores secure electrical connections between components for reliable performance.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This Top Cover is the outer panel that protects the appliance's internal components and completes the exterior finish. It helps keep dust and debris out while restoring the unit's appearance and structural fit. What it does:

• Covers and protects internal electronics, wiring, and components from dust and foreign objects
• Restores the appliance's exterior finish and alignment for proper door/control fit
• Helps prevent moisture and spills from entering the cabinet area
• Reduces risk of loose or rattling parts caused by a damaged or missing top panel

• Always disconnect power (unplug or switch off breaker) before beginning work
• Basic hand tools are typically required; support the panel during removal/installation to avoid scratches
• Handle edges carefully—panels may have sharp stamped metal edges
• Verify secure attachment and that surrounding trim and seals align after installation

This drain hose directs used water from your washer to the household drain. Replace if cracked, split, leaking, or chewed through by rodents.

This shock absorber dampens vibrations and movement of the wash tub during the spin cycle. It connects between the outer tub and the base frame to keep the tub stable and reduce excessive shaking. Replace this part if the washer vibrates excessively, makes loud banging noises during spin, or walks across the floor during operation.

Molded trim piece that shields and supports the washer guide track assembly. Replace if cracked, broken, or missing to maintain smooth alignment.

If your washer won't start or shows a door lock error code, a faulty lid switch assembly is likely the cause. This safety switch detects proper closure.

Fix washer not draining or leaking water with this drain hose assembly. Replaces cracked, leaking, or blocked hoses that prevent proper drainage.

Secures internal components to the washer frame. Replace if cracked, bent, or broken to restore proper alignment and stop rattling or sagging parts.

Secures internal washer components in proper alignment. Replace this mounting bracket if cracked, rusted, broken, or missing to restore stability.

Dispenses detergent, softener, and bleach during wash cycles. Replace if cracked, clogged, or disintegrated. Confirm fit with your model number.

Fix poor cleaning or uneven water spray in your washer with this tub spray nozzle assembly. Directs water during wash cycles. Moderate DIY repair.

Washer won't switch cycles or hums during agitation? The clutch and housing assembly connects the motor to enable spin cycles. Moderately difficult repair.

Fix a washer that won't fill, leaks underneath, or drips constantly with this water inlet valve. Controls water flow into the drum. Easy DIY repair.

Leaking water behind your washer? A cracked inlet hose is often the culprit. This hose channels water from your supply line into the machine during fill.

If your washer drum won't spin or spins erratically, the stator assembly may have failed. This electromagnetic component controls drum rotation speed.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Fix E6 error codes and loud ratcheting sounds during wash or spin cycles. This washer motor assembly drives drum rotation for proper cleaning.

This assembly includes a noise filter and wiring harness that connects to the washer's main control board. The noise filter suppresses electrical interference generated by the motor and other components, protecting the control electronics from voltage spikes. Replace this assembly if the washer trips a breaker, fails to start, or if the control board is malfunctioning due to electrical noise or a damaged wire harness.

Fix washer control issues, display errors, or cycle failures with this wire harness. Connects electronic controls to motors and sensors. Moderate DIY repair.

Secures brackets, panels, and fasteners inside your washer. Replace this nut if worn, missing, or stripped to restore tight connections and eliminate rattling.

Small flat hardware washer that sits under screws or bolts on washer assemblies. Distributes load and protects surfaces. Replace if missing or worn.

Snap-on trim cap that conceals fasteners and openings on your washer. Replace if cracked, broken, or missing to restore finished appearance.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.