Parts for Kenmore 796.51992610 (79651992610, 796 51992610): Outer Case Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

Complete washer lid assembly that covers the top opening of your washing machine. Replace if your current lid is cracked, broken, or missing hinges.

This accessory assembly is a factory replacement component that restores the original mounting/connection function in compatible LG appliances, helping eliminate loose fittings and restore secure operation. What it does

• Replaces a worn or damaged accessory assembly that secures or connects appliance components.
• Restores proper alignment and engagement of the affected assembly to reduce rattling or movement.
• Can help address symptoms such as loose parts, intermittent connection issues, or unusual noises originating near the assembly.
• Matches OEM fit and form to maintain original performance when installed correctly.

• Disconnect power (unplug or shut off breaker) before beginning any repair.
• Basic hand tools are typically required; follow the appliance service manual for removal and installation steps.
• Inspect surrounding components for wear or damage while replacing this assembly.

Replace your washer drain hose to restore proper wastewater flow and prevent leaks. Install when hose is cracked, kinked, or leaking. Confirm fit with model.

Washer drain hose carries water from the tub to your home's drain. Replace if cracked, kinked, or leaking. Confirm fit with your model number before ordering.

Replace your washer's missing, cracked, or damaged accessory assembly. Restores proper mounting and connection points for attached components.

Detergent not dispensing or leaking during wash? This dispenser assembly routes detergent into the drum and stops leaks. Restores reliable dispensing.

Secures the leveling foot to the washer base. Replace if cracked, stripped, or missing to restore a solid mounting point for proper leveling and stability.

Base bracket that holds the leveling foot at the washer cabinet. Replace if cracked, broken, or missing to restore stability and prevent rocking or vibration.

This small structural bracket supports the "leg" of an interior shelf or drawer assembly in compatible refrigerators. It helps keep shelves level and stable so bins slide smoothly and contents stay secure during everyday use. What it does:

• Supports the corner/leg of an interior shelf, cover, or drawer rail
• Helps maintain level alignment and prevents wobble or sagging
• Restores stability if the original piece is cracked, warped, or missing
• Common symptoms: shelf or drawer sags, binds, or rattles; poor fit/alignment

• 1 supporter leg

• Disconnect power and remove food from the affected area before starting
• Remove the shelf/drawer and note fastener locations or locking tabs
• Transfer any reusable screws/clips and seat the new supporter fully
• Reinstall components, ensuring the shelf/drawer sits level and moves freely

Replacement top cover panel for your washer cabinet. Install this cosmetic part when the original is cracked, dented, rusted, or missing to restore appearance.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

Adjustable leveling leg assembly that threads into the washer base. Replace if leg is broken, stripped, or missing to properly level your unit.

If your washer won't fill with water or leaks during fill cycles, a damaged inlet hose is often the cause. This hose restores proper water flow.

Connects your washer to the home water supply. Replace this inlet hose if cracked, leaking, or worn to restore reliable water flow during fill cycles.

Replace your washer's inner tub cover to restore proper sealing and alignment for consistent wash action. Keeps clothes clear of internal components. Confirm fit with your model number before ordering.

This is a door lock and switch assembly that secures the washer door during operation and signals the control board that the door is properly closed. It prevents the door from being opened while the drum is spinning and allows the wash cycle to begin. Replace this assembly if the washer won't start, displays a door lock error code, the door won't lock or unlock, or the cycle stops unexpectedly.

Mounting bolt for washers. Secures internal components and assembly parts. Replace if bolt is stripped, corroded, missing, or damaged during repairs.

Replace your washer's single wire harness if the original is frayed, damaged, or has broken connectors. This harness connects electrical components inside the machine.

This pipe connector joins appliance water tubing to the inlet assembly, restoring a secure, leak-resistant connection so the dispenser or ice-making system can get a steady water supply. Ideal when fittings are cracked or worn. What it does:

• Creates a watertight connection between supply tubing and the appliance inlet/valve
• Stops leaks caused by cracked, split, or loose fittings at the tubing junction
• Restores proper water flow to dispensers and ice makers when a bad connector is the cause
• Helps prevent water pooling and potential damage from slow leaks

• Turn off water supply and disconnect power before replacing the connector
• Inspect tubing ends for damage and trim squarely if needed before installing
• Use correct tools and tighten fittings per manufacturer guidance; do not overtighten
• After installation, restore water and power and check carefully for leaks

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This plastic connector joins the drain hose between a washer pedestal and the main washer unit. It provides a secure, leak-free connection so water can flow properly from the pedestal through the drain system. Replace this connector if you notice water leaking at the hose junction or if the fitting is cracked or damaged.

Fix a washer that won't fill with water or fills too slowly with this inlet valve assembly. Controls water flow and pressure during wash cycles.

Durable plastic drain hose that connects to the back of your washer near water hookups. Replace if cracked, kinked, or missing to restore proper drainage.

Fix a washer that won't fill with water or fills too slowly with this inlet valve assembly. Controls water flow and pressure during wash cycles.

Connector assembly for washers. Links electrical or water components inside your machine. Replace if cracked, broken, or causing loose connections.

This roller assembly supports the dryer drum and lets it turn smoothly, reducing friction and wear for quieter, more reliable operation. It replaces a worn or noisy drum support to restore proper drum rotation. What it does:

• Supports the dryer drum on the rear/under side to maintain alignment during rotation
• Reduces squeaks, grinding noises, and metal-on-metal contact caused by worn rollers
• Helps prevent drum wobble, uneven wear, and rubbing that can cause poor drying
• Works as part of the drum support system with the shaft and mounting bracket

• Disconnect power before starting service to avoid electrical shock
• Access typically requires removing the dryer rear panel or front bulkhead; follow your model's service manual
• Inspect the shaft, mounting bracket, and adjacent rollers and replace any damaged components to prevent repeat failure
• Use proper tools and moderate force

Washer won't turn on or power button doesn't respond? This push-button switch restores tactile on/off control without replacing the entire panel.

This part is a hinge. This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective hinge on multiple different models of LG washers and dryers. This part is made for use with LG appliances and may not correctly fit appliances manufactured by other brands. This hinge is for attaching the lid of the washer or dryer to the appliance, allowing it to open and close smoothly. If the lid will not open properly, the hinge may need to be replaced. Please follow appropriate safety precautions when attempting to replace any appliance parts. Ensure the washer or dryer is fully disconnected from its power source before attempting this repair. For more accurate information on how and where to install this replacement hinge, the manufacturer owner's manual and diagrams should be referenced.As an authentic replacement part, this hinge is suitable for use on several different models of washers and dryers manufactured by LG. Please note that this is a genuine part made of high-quality, durable plastic and is sold individually.

Fix standing water in your washer tub with a new drain pump assembly. Restores proper water removal during drain and spin cycles to complete loads.

Protective cover for washer components. Shields internal parts from debris and damage. Replace if cracked, broken, or missing to maintain proper coverage.

Washer not heating water or showing tE error? This temperature sensor monitors water temp and signals the control board. Moderate DIY repair fixes temp issues.

Protective cover for washer control panel or component housing. Replaces cracked, broken, or missing covers. Shields internal parts from damage.

Plastic cover that protects and conceals the water inlet valve assembly on your washing machine. Replace if cracked, broken, or missing for proper appearance.

Connects your washer's supply hose to internal plumbing, preventing leaks at the inlet. Replace if you notice dripping or poor water flow during fills.

Connector hose for washers. Links water supply lines or internal components. Replace if cracked, leaking, kinked, or damaged to restore proper operation.

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Secures rubber hoses to fittings with constant spring tension to prevent leaks. Replace when rusted or weakened to maintain a tight seal. Confirm fit.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

Replace your washer's door bellow if the rubber seal is torn, cracked, or leaking. This flexible gasket creates a watertight seal between the drum and door.

Flexible rubber seal between washer door and tub preventing leaks during wash cycles. Replace if torn, cracked, or leaking. Verify fit with your model.

Replaces cracked, torn, or leaking washer door bellows. This flexible rubber boot seals between the drum and door opening on front-load washers.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.