Parts for Kitchenaid KEMS309BBL00: 03 - Oven Door Parts

The GLASS-DOOR is an OEM component specifically designed for Whirlpool wall ovens. Made of durable tempered glass, the door allows for the viewing of foods without needing to open the oven during the baking or cooking process.  

Causes of a bad glass door can include cracks or chips in the glass from impact or thermal stress, failure of the door seals letting heat escape and compromise cooking performance, or damage to the door hinges or latch mechanism.

Symptoms of a bad glass door include:

• Inability to open or close the door securely 
• Cracks or breakage in the glass panel
• Excessive heat loss causing uneven or incomplete cooking
• Difficulty seeing food through a cloudy or damaged glass panel

Color: Black

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This 10-32 x 3/8 machine screw secures appliance components. It keeps panels, brackets, and trim firmly attached so everything stays aligned and quiet during operation.

• Fastens metal parts using a 10-32 thread in pre-tapped holes or with a matching 10-32 nut
• Maintains proper alignment of panels, brackets, and trim to reduce vibration and rattling
• Replace if the original screw is missing, stripped, rusted, or damaged
• Using the correct hardware helps restore a secure, factory-tight fit

• Disconnect power; shut off gas supply if applicable. Allow the appliance to cool completely before servicing
• Note screw locations/lengths and replace like-for-like
• Start threads by hand to avoid cross-threading; snug with the appropriate driver—do not overtighten
• If the receiving threads are damaged, repair or replace the mating component before installing

Self-tapping screw used in range assembly. Features 8-18 thread size and 0.375 inch length. Also used in some washer models as cross-appliance hardware.

Color: White

This nameplate displays your dishwasher's model information and operating instructions for easy reference. It adheres to the appliance's exterior and provides important safety and usage details. Replace this nameplate if it becomes illegible, peels off, or gets damaged during cleaning.

Color: Black

Secures your oven door to the cabinet hinge for smooth opening and closing. Replace if cracked, broken, or missing to restore proper door alignment.

This door plastic bracket secures the appliance door to the cabinet, keeping the door aligned and stable so it closes properly and seals. A simple replacement for worn, cracked, or broken door support hardware. What it does

• Holds the door in the correct position and connects the door assembly to the cabinet.
• Restores proper door alignment to reduce gaps, scraping, or uneven closing.
• Stops rattling or rocking caused by a cracked or broken bracket.
• Helps the door latch and seal correctly so the appliance can operate safely.

• One door plastic bracket (LW) as shown.

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the door or inner door panel; keep track of fasteners.
• Inspect surrounding screws, clips, and the mating surface; replace any damaged fasteners.

This Door Hinge supports and pivots the appliance door for smooth operation and a square, reliable close. Replacing a worn hinge restores alignment so the door seals properly and opens and closes without binding or noise. What it does

• Supports door weight and provides the pivot point for opening and closing
• Maintains proper door alignment to help ensure an even gasket seal
• Restores smooth, consistent door movement
• Common symptoms: door droops or rubs, squeaks/grinds, or won't close flush

• Includes 1 door hinge

• Disconnect power before servicing
• Support the door and use a helper; remove contents as needed to reduce weight
• Mark hinge position and transfer any spacers/bushings in the same order
• Tighten mounting fasteners, then check alignment and gasket contact; adjust as needed

Replaces cracked, broken, or clouded sealed glass unit in your oven door. Restores clear visibility and proper insulation. Essential for damaged windows.

Replace your cracked, broken, or missing oven door handle. This exterior handle mounts to the front of the door for safe opening and closing.

Replace your broken or cracked range door handle. This exterior handle installs on the oven door for easy opening and closing. Order today.

Replace your oven's front-mounted door handle when the original is cracked, broken, or damaged. This handle installs on the outer door panel for opening.

This is a stainless steel door handle for a wall oven or microwave. It mounts to the exterior of the door and provides a grip for opening and closing. Replace this handle if it is cracked, loose, or broken, making it difficult to safely open or close the appliance door.

Replacement 8-32 x 3/8 mounting screw for securing panels, brackets, and covers to appliance frames. Restores tight fit when original is missing or worn.

This is a metal bracket used to secure the oven door glass panel in place. It holds the inner or outer glass firmly within the door assembly to maintain proper insulation and visibility. Replace this bracket if the oven door glass is loose, rattling, or if the bracket is bent or broken.

This is a trim piece that covers the vent opening on the oven door, providing a finished appearance while allowing hot air to escape during cooking. It snaps or screws into place along the door's vent area. Replace this trim if it is cracked, warped, discolored, or missing, which can affect both the look and proper ventilation of your oven.

Replacement inner door glass for your oven. Installs inside the door frame for viewing food while cooking. Order if cracked, shattered, or broken.

Replacement bumper rail that cushions your oven door to reduce noise and prevent metal contact. Installs on door frame to restore smooth closing.

Maintains oven door structure and secures the glass panels in place. Replace if cracked, broken, or missing to restore proper door assembly and fit.

Seals your oven's exhaust vent to prevent air leaks and maintain proper airflow. Replace if you notice drafts or heat escaping. Confirm fit with model.

Positions and supports exhaust components at the top outlet for proper duct alignment and seal. Replace if damaged or missing to prevent air leaks and vibration.